Zippie Voyage Kid Kart Hi-Lo Bases User manual

O w n e r ’ s M a n u a l
ZIPPIE Voyage®& Kid Kart
Hi-Lo Bases®
Supplier: This manual must be given to the user of
this wheelchair.
User: Before using this wheelchair read this entire
manual and save for future reference.
ZIPPIE VOYAGE &Kid Kart
Hi-Lo Bases
Manuel
d’instructions
ZIPPIE Voyage®& Kid Kart
Hi-Lo Bases
Au Fournisseur : Ce manuel doit être remis à l’usager de ce fauteuil
roulant.
À l’Usager : Veuillez lire tout le manuel et le conserver pour
rérérence ultérieure.
Chaque fauteuil est livré avec un manuel d’instructions en anglais. La version en français est à
votre disposition en format PDF sur le site : www.SunriseMedical.com. Veuillez vous rendre
à la page de votre produit pour télécharger le manuel dans la langue souhaitée, ou contactez
un fournisseur agréé Sunrise Medical.
Manual de Instrucciones
ZIPPIE Voyage®& Kid Kart
Hi-Lo Bases
Distribuidor: Este manual debe ser entregado al pasajero de esta
silla de ruedas.
Pasajero: Antes de usar esta silla de ruedas, lea este manual en
su totalidad y guárdelo para futura referencia.
Cada una de las sillas se envía con un manual de instrucciones en inglés. El manual en español
está disponible en formato PDF en nuestra página en Internet: www.SunriseMedical.com.
Ingrese a la página del producto específico para descargar el manual, o comuníquese con el
proveedor autorizado de Sunrise Medical.

SUNRISE LISTENS
Thank you for choosing a Zippie product. We want to hear your
questions or comments about this manual, the safety and reliability
of your device, and the service you receive from your supplier.
Please feel free to write or call us at the address and telephone
number below:
SUNRISE MEDICAL
Customer Service Department
2842 Business Park Avenue
Fresno, CA 93727 USA
[phone]
Let us know your address. This will allow us to keep you up to
date with information about safety, new products and options to
increase your use and enjoyment of this Dependent Mobility
Device.
FOR ANSWERS TO YOUR QUESTIONS
Your authorized supplier knows your Zippie product best, and can
answer most of your questions about device safety, use and main-
tenance.
For future reference, please fill in the following:
Supplier: _______________________________________________________________
Address: _______________________________________________________________
Telephone: _____________________________________________________________
Serial #: ________________________________________ Date/Purchased:_________
ADDITIONAL INFORMATION YOU SHOULD KNOW
No component of this chair was made with Natural Rubber Latex.
DISPOSAL AND RECYCLING INFORMATION
When this product reaches the end of its life, please take it to an
approved collection or recycling point designated by your local or
state government. This wheelchair is manufactured using a variety
of materials, Your product should not be disposed of as ordinary
household waste. You should dispose of your wheelchair proper-
ly, according to local laws and regulations. Most materials that are
used in the construction of this product are fully recyclable. The
seperate collection and recycling of your product at the time of
disposal will help conserve natural resources and ensure that it is
dosposed in a manner that protects the environment.
Ensure you are the legal owner of the product prior to arranging
for the product disposal in accordance with the above recommen-
dations.
I. INTRODUCTION
ZIPP IE HI-LO BASE
2
MK-100297 Rev.B
CONTENTS
I. INTRODUCTION........................................................2
II. NOTICE– READ BEFORE USE .................................2
III. YOUR DEVICE AND ITS PARTS .............................3
IV. GENERAL WARNINGS .............................................4
A.Weight Li it ...............................................................................4
B. Area of operation ......................................................................4
C.To reduce the risk of an accident .........................................4
D.Safety checklist ...........................................................................4
E. Pelvic positioning belts .............................................................4
F. Accessories..................................................................................4
G.Plastic co ponents....................................................................4
V. OPERATING INSTRUCTIONS .................................5
A.Caster Wheels............................................................................5
B. Installing the seating and positioning shell ...........................5
C.Base height adjust ent.............................................................6
VI. MAINTENANCE AND SAFETY ...............................6
A.General Maintenance ...............................................................6
B. Cleaning........................................................................................7
C.Storage tips..................................................................................7
VII. SUNRISE LIMITED WARRANTY .............................7
NOTICE-READ BEFORE USE
A. CHOOSE THE RIGHT DEVICE & SAFETY OPTIONS
Sunrise provides a choice of device styles to meet the needs of
your dependant. However, final selection of the type of device,
options, and adjustments rests solely with you and your health
care advisor. Choosing the best early intervention device and set-
up for safety depends on such things as:
1. The child’s disability, strength, balance, coordination, and the
limits of their abilities.
2. The types of hazards that must be overcome in daily use
(where you live and work), and other places you are likely
to use the device.
3. The dependents need of options for their safety and comfort.
INTENDED USE: The Zippie and Kid Kart Base is intended for
medical purposes to provide mobility to persons under
75lbs(34kg) restricted to a sitting position.
B. REVIEW THIS MANUAL OFTEN
Before using this device you, and each person who may assist you,
should read this entire manual and any manual that would apply to
specific products that this base supports make sure to follow all
instructions. Review the warnings often, until they are second nature
to you.
C. WARNINGS
The word “WARNING” refers to a hazard or unsafe practice that
may cause severe injury or death to you or to other persons.

III. YOUR DEVICE AND ITS PARTS
ZIPP IE HI-LO BASE
3MK-100297 Rev.B
1. Cross Tube
2. Release Lever
3. Gas Spring
4. Scissor Frame
5. Lower Frame
6. Casters
4
5
6
2
11
Adjustable Height Hi-Lo Base - Voyage
1. Receiver tabs
2. Release Lever
3. Gas Spring
4. Scissor Frame
5. Lower Frame
6. Casters
3
4
5
6
21 2
Hi-Lo Base Voyage - First Edition
1. Side Plates
2. Release Lever
3. Gas Spring
4. Scissor Frame
5. Lower Frame
6. Casters
3
5
6
2
13
Hi-Lo Base - Kid Kart
1. Side Plates
2. Release Lanyard
3. Caster Lock
4. Scissor Frame
5. Lower Frame
6. Casters
3
5
6
2
14
Hi-Lo Base - Kid Kart TLC
3
4
4

IV. GENERAL WARNINGS
MK-100297 Rev.B 4
ZIPP IE HI-LO BASE
E. PELVIC POSITIONING BELTS
WARNING
Use positioning belts ONLY to help support the child's posture.
1. Make sure the rider does not slide down in the mobility device
seat. The belts must be snug, but must not be so tight that
they interfere with breathing. You should be able to slide your
open, flat hand, between the belt and the rider.
2. Use positioning belts with a cooperative rider only. Make
sure that you can remove the belts in an emergency.
3. NEVER use the positioning belts:
• As a restraint.
• On a child who is comatose, agitated or is prone to
seizures.
F. ACCESSORIES
WARNING
1. See your health care professional and have them adjust seat-
ing components and accessories as your child grows.
2. Unauthorized modifications or use of parts not supplied or
approved by Sunrise Medical may change the product’s
structure. This will void any warranty and may cause a safe-
ty hazard.
3. The device is not designed for use with accessories like ven-
tilators, O2 bottles or IV poles. Contact Sunrise Medical for
information on devices that work with these accessories.
Use of any device not approved by Sunrise Medical could
result in injury to the occupant or damage to the unit.
G.PLASTIC COMPONENTS
WARNING
1. Do not attempt to glue or bond any broken plastic compo-
nents. Some adhesives or thread locking compounds may be
chemically incompatible with the plastic material and could
weaken it.
2. Unauthorized use of any such chemicals (for example, sol-
vent or acrylate based adhesives) may void the warranty.
3. Replace any broken components with new parts. Failure to
follow this warning may result in damage to the chair or
injury to the rider or others.
A. WEIGHT LIMIT
WARNING
NEVER exceed the weight limit of 75 pounds (34 kilograms), for
the weight of the occupant. If the limit is exceeded, damage to
your device, a fall, tip-over or loss of control may occur and cause
severe injury to the rider and/or others.
B. AREA OF OPERATION
WARNING
This device is designed to be used indoors on even, smooth sur-
faces. Outdoor use can prematurely wear parts or damage the
unit. Using this product on Roadway or rough surfaces may void
the warranty.
C. TO REDUCE THE RISK OF AN ACCIDENT
WARNING
1. BEFORE using this device, you should be trained in Its safe
use by your health care professional.
2. ALWAYS remove the occupant from the seating system
before removing the seating system from the Hi-Lo base.
Failure to do so may result in injury to the rider and/or
caregiver.
3. FOR SAFETY always return the product to a neutral posi-
tion (90°) and lower the base BEFORE removing or adding
the seating system. The base should be on a level surface
with the caster locks engaged for maintenance or occupant
transfers.
4. ALWAYS remove the occupant from the Hi-Lo base if you
need to move the base from one floor to another using a
stairway. Failure to do so may result in severe injury to the
rider or caregiver.
5. ALWAYS lock the caster wheels before attempting to adjust
the height or tilt of the unit.
6, NEVER leave the occupant unattended.
D.SAFETY CHECKLIST
WARNING
Before each use of the Device.
1. Check that the device rolls easily, and that all parts work
smoothly. Check for noise, vibration, or a change in ease of
use, (they may indicate loose fasteners, or other damage).
2. NEVER use the base for more than one rider. Failure to fol-
low this warning may result in injury or structural damage to
the unit.
3. Check to make sure the device is properly assembled and
adjusted before attempting to seat an occupant. Check to
make sure all adjustment knobs and hardware are secure
and locked.
4. Items should not be placed or hung from the push handle, as
this can compromise the stability of the base and may lead
to injury or damage to the device.
5. If you suspect the base is not functioning correctly, discon-
tinue use and contact your Authorized Supplier for solutions
to the problem.

MK-100297 Rev.B
5
V. OPERATING INSTRUCTIONS
ZIPP IE HI-LO BASE
The Zippie Hi-Lo base is a lightweight alternative base for the Voyage positioning shell designed for
the home or institutional environment. The Zippie Hi-Lo base is height adjustable from approxi-
mately a 10-inch to 23-inch floor to seat height. (Fig. 5) This capability allows the child to be com-
fortable at a variety of heights for indoor activities. This unit also provides a compact base for ther-
apeutic evaluations. Also, at the lowest position it is compact for ease of storage.
The Zippie Hi-Lo base uses a gas spring to assist with the height adjustment function. Please read all
user instructions in both this Owner’s manual and the Voyage Owner’s manual prior to attempting
to use the Hi-Lo Base.
A. CASTER WHEELS
Always lock the caster wheels before attempting any adjustment on the Hi-Lo base, or parking on a
slope or incline.
1. Locking the Caster Wheels
a. Push down on the locking lever(A) using either a foot, or thumb until it locks the caster.
b. Repeat this action on all four casters and check for movement. The unit is now parked.
B. INSTALLING THE SEATING AND POSITIONING SHELL
Always lock the caster wheels before attempting any adjustment on the Hi-Lo base.
1. Kid Kart and TLC
a. Position the seating system between the receiver side plates and line up the Locking pin(B)
with the guide on the side plate.(C)
b. Lower the system into the guide on both sides, and press down gently until you feel the lock
engage.
c. For Safety, check the seating system to make sure it is locked before use.
2. Zippie Voyage First Edition (Advanced Seating)
a. Position the seating system above the receiver tabs (D).
b. Lower the system onto the tabs until the system Locks into place. Check for movement,
c. Make sure that the locks are completely engaged on both sides before use.
6
7
8
5
6
7
8
A
D
C
B

MK-100297 Rev.B 6
ZIPP IE HI-LO BASE V. OPERATING INSTRUCTIONS
3. Zippie Voyage (Advanced and Moderate Seating)
a. Position the seating system above the Locking plate (A).
b. Ensure all positioning straps and accessories are out of the way and will not interfere with
the seat from fully engaging the receiver.
c. Line up the yellow arrow tag(B) with the Cross tube(C) and lower the seating system so
that there is even contact between the locking plate and the receiver plate(D) on the bot-
tom of the seating shell.
d. Slide the seating system towards the back of the Voyage frame in the direction of the
arrow until it clicks. This should lock the seating and positioning system in place.
e. Before use, safety check the seating system by trying to tilt it forward or backward, it
should not move or tilt.
C. BASE HEIGHT ADJUSTMENT
NOTE - The height adjustment can be made safely with the child secured in the seating assembly. Always
lock the caster wheels before attempting to adjust the height.
1. Raise the seating platform
a. Grasp the height adjustment lever/bar(E) at the rear of the unit and gently pull the gas
spring release lever toward you to release the Gas spring lock.
b. While holding the gas spring release lever, pull straight up on the frame to adjust the
height to your desired position.
c. Repeat this process until the preferred height is reached.
2. Lower the seating platform
a. Grasp the height adjustment lever/bar(E) This will release the pressure in the gas spring.
b. While holding the gas spring release lever, push down on the frame to adjust the height to
your desired position.
3. Storage or transport of the seating platform
a. If you would like to store or transport your base, remove the rider from the Hi-lo base
and continue push the scissor frame all the way to the floor.
b. Release the handle(E) and the base should lock into the folded position.
VI. MAINTENANCE AND SAFETY
A. GENERAL MAINTENENCE
1. Proper maintenance will improve performance and extend the useful life of your mobility
device.
2. Clean the device regularly. This will help you find loose or worn parts and will make your
device easier to use.
3. To protect your investment, have all major service and repair work done by your supplier.
4. At least every four months, check all screws and knobs for tightness. If parts are missing,
broken, damaged or worn, then discontinue use of the product until repairs are made,
using factory-authorized parts.
5. Wipe down all plastic components periodically with a solution of mild soapy water to
maintain cleanliness.
7. Lubricate all moving metal parts with a teflon lubricant only.
NOTE - Using lubricant other than Teflon-based may damage moving parts
8. Check lock pins weekly to make sure they engage smoothly. This simple check will insure
the safety of the rider.
9. Check and clean the wheel attachment points frequently, this is a main area that can col-
lect dirt and grime. Debris in this area can effect the performance and safety of the device.
9
10
11
12
13
9
10
11
12
13
A
D
C
B
E
E
4. Using the Slide-n-Lock(Latch lock)
Note - The latch under the seat plate has a lock that can be used to provide additional
securement after the seat is installed.
a. BEFORE attaching or removing the seat to or from the base, the latch lock(F) MUST be
slid to the right(unlocked position) as shown in Fig. 14.
b. To prevent inadvertent activation of the seat latch, slide the latch lock to the left as shown
in Fig. 15 AFTER the seat is fully secured to the base(you cannot attach seat to base while
lock is engaged).
14 15

VII. SUNRISE LIMITED WARRANTY
MK-100297 Rev.B
7
ZIPP IE HI-LO BASE
VII. SUNRISE LIMITED WARRANTY
C. LIMITATIONS
1. We do not warrant:
• Damage from neglect, accident, misuse, or from improper
installation or repair.
• Products modified without Sunrise Medical’s express writ-
ten consent.
• Damage from exceeding the weight limit.
2. This warranty is VOID if the original device serial number
tag is removed or altered.
3. This warranty applies in the USA and Canada only. Check
with your supplier to find out if international warranties
apply.
4. This warranty is not transferable and only applies to the first
consumer purchase of this device through an authorized
Sunrise Medical dealer.
D.WHAT WE WILL DO
Our sole liability is to repair or replace covered parts. This is the
exclusive remedy for consequential damages.
E. WHAT YOU MUST DO
1. Obtain from an authorized supplier, while this warranty is in
effect, prior approval for return or repair of covered parts.
2. Return the device or part(s), freight pre-paid, to Sunrise
Mobility Products Division at: 2842 Business Park Avenue,
Fresno, CA 93727-1328.
3. Pay the cost of labor to repair, remove or install parts.
F. NOTICE TO CONSUMER
1. If allowed by law, this warranty is in place of any other war-
ranty (written or oral, express or implied, including a war-
ranty of merchantability, or fitness for a particular purpose).
2. This warranty gives you certain legal rights. You may also
have other rights that vary from state to state.
G. ADDITIONAL WARRANTY INFORMATION
For goods provided by Sunrise Medical Pty Ltd in Australia, our goods
come with a guarantee by Sunrise that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably forsee-
able loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure. The benefits to you given by this warranty
are in addition to your other rights and remedies under a law in relation to
the goods to which the warranty relates.
Record your serial number here for future reference:
____________________________________________
WARNING
1. Your device needs regular maintenance for peak performance and to avoid injury from a
device failure, damage or premature wear.
2. Inspect and maintain this device using this Owner’s manual as a reference.
3. If you detect a problem, make sure to service or repair the device before putting the
device back into use.
4. At least once a year, have a complete safety check and service of your device performed
by your supplier.
14
F
15
A. FOR THREE (3) YEARS
Sunrise Medical warrants the Zippie Hi-Lo base frame and Gas
Spring against defects in materials and workmanship for 3 years.
B. FOR ONE (1) YEAR
We warrant the Zippie Hi-Lo base casters and all Sunrise-made
parts and components of this device against defects in materials
and workmanship for one year from the date of first consumer
purchase.
B. CLEANING
Base Frame Parts:
• Clean with mild soapy water monthly.
• Hand-wash as needed.
C. STORAGE TIPS
1. Store your device in a clean, dry area. If you fail to do so,
parts may rust or corrode.
2. Before using your mobility device, make sure it is in proper
working order. Inspect and service all items included in this
Manual.
3. If you store this device for more than three months, have it
inspected by a supplier before use.

©2019 Su rise Medical (US) LLC
2.19 MK-100297 Rev.B
Customer Service: 800.333.4000
www.Su riseMedical.com
Sunrise Medical • 2842 Business Park Ave. • Fresno, CA 93727 • USA
In Canada [phone]