ZKTeco BG300 User manual

BG300 Barrier Gate User Manual
P a g e | 1 Copyright©ZKTECO CO., LTD. All rights reserved.
Thank you for choosingour product. Please readthe instructions carefully
before operation. Follow these instructions to ensure that the product is
functioning properly. The images shown in this manual are for illustrative
purposesonly.
www.zkteco.in.
User Manual
BG300 Barrier Gate
Date:September 2021
Doc Version: 1.0
English

BG300 Barrier Gate User Manual
P a g e | 1 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Copyright © 2022ZKTECO CO., LTD.All rights reserved.
Without the prior written consent of ZKTeco, no portion of this manual can be copied or
forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries
(hereinafter the"Company" or "ZKTeco").
Trademark
is a registered trademark of ZKTeco. Other trademarks involved in this manual
are owned by theirrespective owners.
Disclaimer
This manual contains information on the operation and maintenance of the ZKTeco
equipment. The copyright in all the documents, drawings, etc. in relation to the ZKTeco
supplied equipment vests in and is the property of ZKTeco. The contents hereof should not
be used or shared by the receiver with any third party without the express written
permissionofZKTeco.
The contents of this manual must be read as a whole before starting the operation and
maintenance of the supplied equipment. If any of the content(s) of the manual seems
unclear or incomplete, please contact ZKTeco before starting the operation and
maintenance ofthe said equipment.
It is an essential pre-requisite for the satisfactory operation and maintenance that the
operating and maintenance personnel are fully familiar with the design and that the said
personnel have received thorough training in operating and maintaining the
machine/unit/equipment. It is further essential for the safe operation of the
machine/unit/equipment that personnel have read, understood, and followed the safety
instructions contained in the manual.
In case of any conflict between terms and conditions of this manual and the contract
specifications, drawings, instruction sheets or any other contract-related documents, the
contract conditions/documents shall prevail. The contract specific conditions/documents
shall applyin priority.
ZKTeco offers no warranty, guarantee or representation regarding the completeness of any
information contained in this manual or any of the amendments made thereto. ZKTeco does
not extend the warranty of any kind, including, without limitation, any warranty of design,
merchantability,or fitness for a particular purpose.

BG300 Barrier Gate User Manual
P a g e | 2 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ZKTeco does not assume responsibility for any errors or omissions in the information or
documents which are referenced by or linked to this manual. The entire risk as to the results
and performanceobtained from using theinformation is assumed bythe user.
ZKTeco in no event shall be liable to the user or any third party for any incidental,
consequential, indirect, special, or exemplary damages, including, without limitation, loss of
business, loss of profits, business interruption, loss of business information or any pecuniary
loss, arising out of, in connection with, or relating to the use of the information contained in
or referenced by this manual, even if ZKTeco has been advised of the possibility of such
damages.
This manual and the information contained therein may include technical, other
inaccuracies or typographical errors. ZKTeco periodically changes the information herein
which will be incorporated into new additions/amendments to the manual. ZKTeco reserves
the right to add, delete, amend, or modify the information contained in the manual from
time to time in the form of circulars, letters, notes, etc. for better operation and safety of the
machine/unit/equipment. The said additions or amendments are meant for improvement
/better operations of the machine/unit/equipment and such amendments shall not give any
right to claim anycompensation or damages under any circumstances.
ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment malfunctions
due to any non-compliance of the instructions contained in this manual (ii) in case of
operation of the machine/unit/equipment beyond the rate limits (iii) in case of operation of
the machine and equipment in conditions different from the prescribed conditions of the
manual.
The product will be updated from time to time without prior notice. The latest operation
procedures andrelevant documents are available on http://www.zkteco.in.
If there is anyissue relatedto the product, please contact us.
ZKTeco BiometricIndia Pvt Ltd.
Address B-1, KhataNo.31, Devasandra Industrial Estate,
Whitefield Main Road, Beside Phoenix Mall,
Mahadevapura, Bengaluru,Karnataka.
Phone [phone]
For business-related queries, please write to us at [e-mail].
To know more about our global branches, visit www.zkteco.in.

BG300 Barrier Gate User Manual
P a g e | 3 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
About the Company
manufacturers of RFID and Biometric (Fingerprint, Facial,
Finger-vein) readers. Product offerings include Access Control readers and panels, Near &
Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License
Plate Recognition (LPR) gate controllers and Consumer products including battery-operated
fingerprint and face-reader Door Locks. Our security solutions are multi-lingual and localized
in over 18 different languages. At the ZKTeco state-of-the-art 700,000 square foot ISO9001-
certified manufacturing facility, we control manufacturing, product design, component
assembly, and logistics/shipping, all under one roof.
The founders of ZKTeco have been determined for independent research and development
of biometric verification procedures and the productization of biometric verification SDK,
which was initially widely applied in PC security and identity authentication fields. With the
continuous enhancement of the development and plenty of market applications, the team
has gradually constructed an identity authentication ecosystem and smart security
ecosystem, which are based on biometric verification techniques. With years of experience
in the industrialization of biometric verifications, ZKTeco was officially established in 2007
and now has been one of the globally leading enterprises in the biometric verification
industry owning various patents and being selected as the National High-tech Enterprise for
6 consecutive years. Its products are protected by intellectual property rights.
About the Manual
This manualintroduces the operations of BG300Barrier Gate.
All figures displayed are for illustration purposes only. Figures in this manual may not be
exactly consistent with the actual products.

BG300 Barrier Gate User Manual
P a g e | 4 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Document Conventions
Conventions used in this manual are listed below:
GUI Conventions
For Device
Convention
Description
< >
Button or key names for devices. For example, press <OK>.
[ ]
Window names, menu items, data table, and field names are inside
square brackets. For example, pop up the [NewUser] window.
/
Multi-level menus are separated by forwarding slashes. For example,
[File/Create/Folder].
Symbols
Convention
Description
This impliesabout the notice or pays attention to,in the manual.
The general information which helps in performing the
operationsfaster.
Theinformationwhichis significant.
Care taken to avoid danger ormistakes.
The statementor event that warnsof somethingor that serves
as a cautionary example.

BG300 Barrier Gate User Manual
P a g e | 5 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
TABLE OF CONTENTS
1OVERVIEW........................................................................................................................... 7
2FEATURES AND FUNCTIONALITIES ................................................................................... 7
3APPEARANCE AND DIMENSIONS ...................................................................................... 8
4SPECIFICATIONS................................................................................................................. 9
5INSTALLATION PROCEDURE............................................................................................ 10
INSTALLATION PRECAUTIONS .................................................................................................. 10
CABLE EMBEDDING ................................................................................................................. 10
BOOM INSTALLATION.............................................................................................................. 12
5.3.1 BOOM INSTALLATION PROCEDURE .......................................................................................................12
6LEFT AND RIGHT DIRECTIONS ......................................................................................... 13
7MAINBOARDWIRING INSTRUCTIONS............................................................................. 13
CONNECTION WITH LPRCAMERA............................................................................................ 14
CONNECTION WITH UHFCONTROLLER.................................................................................... 14
CONNECTION WITH LOOP DETECTOR....................................................................................... 15
CONNECTION WITH VR10RADAR SENSOR............................................................................... 16
CONNECTION WITH INFRARED/PHOTOCELL DETECTOR............................................................. 17
8FUNCTIONAL PARAMETER SETTINGS ............................................................................. 19
MAINBOARD PARAMETER SETTINGS ........................................................................................ 19
8.1.1 OPERATINGPROCEDURE........................................................................................................................19
PARAMETER SETTINGS DESCRIPTION ....................................................................................... 20
REMOTE CONTROL PAIRING AND UNPAIRING........................................................................... 22
SET DELAY FOR AUTOMATIC CLOSING AFTER OPENING THE BOOM........................................... 22

BG300 Barrier Gate User Manual
P a g e | 6 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
9COMMISSIONING INSTRUCTIONS ................................................................................... 23
10 PRODUCT PACKING LIST ............................................................................................. 24
11 TROUBLESHOOTING.................................................................................................... 25
12 SAFETY PRECAUTIONS ................................................................................................ 27
13 TRANSPORTATION AND STORAGE............................................................................. 27
14 WARRANTY................................................................................................................... 27

BG300 Barrier Gate User Manual
P a g e | 7 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
1Overview
The BG300 barrier is designed with a yellow chassis, substantial & spectacular shape. It is a
cost-effective car barrier equippedwith high-performance DC brushless motor. The barrier
is equipped with embedded core control system, with fast response speed and rich
function expansion. The device is capable to deliver stable and reliable operation for a
long time.
2Features and Functionalities
1. The fastest operating speed is 1.5s, the speed can be adjusted according to different boom
arm length.
2. Digital control monitoring, supportdelay automatic close functions.
3. High safety, support power off manually rise boom arm, anti - smash functions.
4. The position of the angle of rise/ fall can be adjusted, andthe digital encoder is adopted to
limit the position automatically, replacing the traditional limit structure, and the position
controlis accurate.
5. The barrier boom will rebound whenit is blocked.
6. Invertibility left and right direction, simple and compact transmission mechanism, easy to
install on site.

BG300 Barrier Gate User Manual
P a g e | 8 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
3Appearance and Dimensions

BG300 Barrier Gate User Manual
P a g e | 9 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
4Specifications
Model
BG300
Operating Speed
1.5-6s
Boom Length
Max 6m
Boom Type
Telescopic straight boom
ChassisDimensions
1010*350*280mm
Weight
43KG
MotorType
24V DC brushlessmotor
OutputPower
160W
Output Current
10A
Working Voltage
DC24V
PowerSupply
AC 220V/110V 50-60Hz
Operating Temperature
-30°C to 75°C
MCBF
2 million times
Remote Control Distance
30m

BG300 Barrier Gate User Manual
P a g e | 10 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
5Installation Procedure
Installation Precautions
1. Install the parking barrier on a flat surface. A cement foundation is required before
installationif the groundis notsolid andflat.
2. It is possible to reduce the length of the boom, but it cannot beincreased. After the boom
has been cut, it is important to set the spring balance again to achieve a new balance. The
bottom of the spring contains two plastic nuts designed to adjust the new balance.
3. When the barrieris powered on, do not change thewire connectioninside.
4. Connect the GND to the cabinet to ensureprotection.
Cable Embedding
1. 25 protective sleeve and a cable are required.
2. The route cables must pass through the protective sleeves.
3. Use a tool to open the cable tray on the ground.
Minimum800mm

BG300 Barrier Gate User Manual
P a g e | 11 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Dimensions

BG300 Barrier Gate User Manual
P a g e | 12 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Boom Installation
5.3.1 Boom Installation Procedure
1. Pull the secondary boom out from the upper boom, and thenfasten with 2 screws, as
shownin Figure 1.
2. The procedureof installing the boom to the chassisis shown in Figure2.
Note:
1. Before the barrier is powered on to run the test process, be sure to install the barrier boom
of the corresponding length for the test. If the barrier boom is not installed, please adjust,
and remove the spring under the guidanceof a professional.
2. If the length of the barrier boom is cut and adjusted, the tightness of the spring and the
position of the hanging hole need to be adjusted accordingly to avoid the abnormal
working status thatcannot dropthe boom.
Figure 1 Connect the main boom with the Secondary arm together by 2 screws
Figure2 Install the Boom to the Chassis

BG300 Barrier Gate User Manual
P a g e | 13 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
6Left and Right Directions
7Mainboard Wiring Instructions
1. Please disconnect the power supply before wiring.
2. To switch theinput voltage to 110V, please note thatyou need to set theDIP switch as
shown in the below image:
3. Check carefullywhether the terminals aretightened and whether the wiring isfirm.
The wiringdiagram of thecontrol panelis given below:

BG300 Barrier Gate User Manual
P a g e | 14 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
BG300 Wiring Diagram of Mainboard
Connection with LPR Camera
Connection with UHF Controller
(Note: The Reader1 and 2of Inbio260 Controller corresponds to LOCK1, Reader 3 and 4
corresponds to LOCK2)

BG300 Barrier Gate User Manual
P a g e | 15 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Connection with Loop Detector
Anti-smash and Auto-close function
BG300 Barrier Gate
Mainboard
BG300 Barrier Gate
Mainboard

BG300 Barrier Gate User Manual
P a g e | 16 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Coil Circumference
Coil Number
3m
Based on requirements, ensure that the inductance is
3m to 6m
5 to 6 turns
6m to 10m
4 to 5 turns
10m to 25m
3 turns
25m
2 turns
Connection with VR10 Radar Sensor
Anti-smash and Auto-close function
BG300 Barrier Gate
Mainboard

BG300 Barrier Gate User Manual
P a g e | 17 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Connection with Infrared/Photocell Detector
Anti-smashfunction
BG300 Barrier Gate
Mainboard

BG300 Barrier Gate User Manual
P a g e | 18 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Anti-smash and Auto-close function

BG300 Barrier Gate User Manual
P a g e | 19 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
8Functional Parameter Settings
After the initial installation, power-on the device. Use the "ON" and "OFF" buttons on the
mainboard to complete the self-check processand learn theopening and closing strokes.
Mainboard Parameter Settings
Key Description
Menu: Menu options / Confirm and Enter
Enter: Confirm and Exit
Open/-: Decrease parameter/value
Close/+: Increase parameter/value
8.1.1 Operating Procedure
The display status is given below:
Long pressthe
Menu button to
view the
parameteroptions
Pressthe+/-key
(Close/Open)to
select the required
parameter
PressMenu to
open the selected
parameter,press
+/-to adjust the
corresponding
value.
After settingthe
parameters, press
Enter to confirm
and exit.