Zodiak GPS307 User manual

1
GSM/GPRS/GPS Tracker
User Manual
Preface
Thank you for purchasing the tracker. This manual shows how to operate the device smoothly
and correctly. Make sure to read this manual carefully before using this product. Please note
that specification and information are subject to changes without prior notice in this manual.
Any change will be integrated in the latest release. The manufacturer assumes no
responsibility for any errors or omissions in this document.
Contents
1. FUNCTION INTRODUCTION........................................................................................................................... 3

2
2. APPLICATIONS.............................................................................................................................................. 3
3. HARDWARE DESCRIPTION............................................................................................................................ 3
4. ACCESSORIES............................................................................................................................................... 4
5. SPECIFICATIONS............................................................................................................................................4
6. INSTALLATION.............................................................................................................................................. 5
6.1 SIM Card Installations........................................................................................................................ 5
6.2 Operation instructions.........................................................................................................................5
6.3 Indicator mode.................................................................................................................................... 6
6.4 Initialization........................................................................................................................................ 6
6.5 Change Password................................................................................................................................6
6.6 Authorization ...................................................................................................................................7
6.7 Single Locating................................................................................................................................. 7
6.8 Auto track continuously................................................................................................................... 8
6.9 Turning points update automatically.............................................................................................. 8
6.10 GPS drift suppression...................................................................................................................... 9
6.11 Exact street address........................................................................................................................ 9
6.12 Location based service (LBS) / Cell-ID Locating............................................................................... 9
6.13 Monitor................................................................................................................................................9
6.14 Data logging........................................................................................................................................9
6.15 Data Load..........................................................................................................................................10
6.16 Decide how many times of alarm message........................................................................................10
6.17 Alarms............................................................................................................................................... 10
6.17.1 Low battery alarm................................................................................................................................. 10
6.17.2 GPS blind Spot alert..............................................................................................................................10
6.17.3 Geofence............................................................................................................................................... 11
6.17.4 Movement alarm................................................................................................................................... 11
6.17.5 Over speed alarm.................................................................................................................................. 11
6.18 ARM/DISARM by inductive key.........................................................................................................11
6.19 ARM/DISARM by SMS...................................................................................................................... 11
6.20 Shock sensor Alarm...........................................................................................................................12
6.21 Sleep mode.........................................................................................................................................12
6.21.1 Bicycle model I (Default mode)........................................................................................................... 13
6.21.2 Bicycle mode II.....................................................................................................................................13
6.21.3 Sleep by shock sensor........................................................................................................................... 13
6.22 Scheduled wake-up............................................................................................................................14
6.23 Forward The Third Parties’ Message................................................................................................14
6.24 SIM card Balance Inquiry................................................................................................................. 14
6.25 Check IMEI....................................................................................................................................... 14
6.26 Check state........................................................................................................................................ 14
6.27 Terminal (local) Time Setting............................................................................................................ 15
6.28 Reset Hardware................................................................................................................................. 15
6.29 GPRS Setting..................................................................................................................................... 15
6.29.1 Configure APN......................................................................................................................................15
6.29.2 GPRS User Name and password Setup................................................................................................ 15
6.29.3 Configure IP and Port........................................................................................................................... 16
6.29.4 Switch to GPRS mode.......................................................................................................................... 16
6.30 Web Platform and Mobile APP instructions..................................................................................... 16
7. CAUTIONS...................................................................................................................................................22
8. FAULTS &THE SOLUTIONS.........................................................................................................................23

3
1. Function introduction
1.1. This tracker is a new product based on the GSM / GPRS network and GPS satellite
positioning system, which set multiple functions of security, positioning, monitoring
surveillance, emergency alarms and tracking in its entirety. It can track and monitor
remote target by SMS or internet.
1.2. Features
1.2.1 Taillights shape, easy to hide, waterproof design(IP66)
1.2.2 Built-in GSM, GPS antenna.
1.2.3 Support GPS and LBS (location based service) double tracking solution
1.2.4 Support SMS / GPRS / Internet Network data transmission
1.2.5 Support configures the settings remotely
1.2.6 Set multiple functions of security, tracking, monitoring surveillance, emergency
alarms and management in its entirety.
2. Applications
Used widely for bicycle and other moving objects tracking.
3. Hardware Description

4
4. Accessories
No.
Picture
Item Name
Specs
Note
1
Inductive
key
Standard
2
AC Charger
Input: AC110～240V
Output: 5V
Standard
3
Charger
cable
Standard
5. Specifications
Content
Specs
DIM
8.3×5.4×2.9cm
Weight
170g
Network
GSM/GPRS
Band
850/900/1800/1900Mhz
GPS sensitivity
-159dBm
GPS Accuracy
5m
GPS start time
Cold status 45s
Warm status 35s
Hot status 1s
Charger Voltage
110－220V input
5V output
Battery
Chargeable 3.7V 3200mAh Li-ion battery
Storage Temp
-40°C to +85°C
Microphone /
Inductive key
Fixed Frame

5
Operation Temp.
-20°C to +70°C
Humidity
5%--95% non-condensing
6. Installation
6.1 SIM Card Installations
Please make sure the SIM card is for GSM network and able to execute the function of
incoming calls display, no calls can be diverted and the PIN code is locked. The SMS format
must be TXT format, and can’t recognize the PDU format.
6.1.1. Open the back cover, and take out of battery.
6.1.2. Upwards lift metal sheet along to the SD card slot arrow direction and insert the SIM card, then
press the metal sheet to its original position.
6.1.3. Insert in the SIM card according to the direction of graphic
6.2 Operation instructions
Operate the tracker device in an open area out of door, turn
on the battery switch.
ARM by inductive key: Place the Induction key on the top
of the tracker, indicator will be on. Remove the key after 3
seconds. LED indicator flashes one time, that means tracker
works under ARM state.
If vibration is detected under ARM state, tracker will be
awaken and work for 5 minutes.
DISARM by inductive key: In ARM state,put the inductive
key to the top of the device rapidly for 2 times and then
remove the inductive key, LED flashes 2 times, that means
tracker works in DISARM state. The times put to inductive
key to disarm can be configured, and check chapter 6.19.3

6
for more information
6.3Indicator mode
Send command “light+password+space+mode” to device, mode 1 indicator Driving
mode, default mode is mode 0, Indicator light is off.
0
off
Indicator is off and never blinks.
1
Driving
Quick blink when driving and stop
blink when parking.
2
Quick blink
Keep blinking fast
3
Working
Blink each
second
GSM reception normal
Blink each 3
seconds
GPRS mode
Double blink
each time
GPS fixed
on
No GSM reception
6.4 Initialization
Send “begin+password”in SMS to the unit, it will reply “begin ok”and initialize
all the settings. (Default password: 123456)
For example, send SMS“begin123456”to the tracker , If succeeded,
tracker will reply “begin ok”
6.5 Change Password
6.5.1 Send SMS “password+old password+space+new password” to the unit to change the
password. For example: send SMS “password123456 888888” to the unit. If succeeded,
“password ok” will reply to your cell phone from the device tracker.
6.5.2 Be sure to keep the new password in mind, you have to upload the software
to restore the original setting in case of losing the new password.
6.5.3 Attention: Make sure the new password is in 6 digits Arabic numbers, or else
the tracker cannot recognize the password.
6.5.4 When reading this user manual, you will notice that we have used "+" and
"space" between some words;"+" between two words means they should be
written together as one word and "space" between two words means you should
leave one character space between two words.

7
6.6 Authorization
Up to 5 numbers can be authorized
6.6.1 Call the tracker for 10 times continuously and get its position, then it will save
the cell phone number as the authorized number automatically., and reply “add
master ok”.
6.6.2 Authorization: Send SMS “admin+password+space+cell phone number” to
set up an authorized number, the other authorized numbers should be set by the
first authorized number, if the number is successfully authorized, the unit will
reply“ admin OK” by SMS.
6.6.3 Delete authorization:
Send SMS “noadmin+password+space+authorized number” to delete the authorized
number.
6.6.4 If you want to track the target when it enters into another country, you must
add the country code before the cell phone number. You should authorize your
number in international format as follows:“admin123456 008613322221111” to
tracker to set 13322221111 as an authorized number
6.7 Single Locating
6.7.1 If there aren’t any authorized numbers set-up, it will reply to all calls with a
location report. If there are authorized numbers set-up, it won’t reply when the
unauthorized number calls it
6.7.2 If you call it from authorized phone number, it will hang up and report a real-
time location as below:
*When lost fix to satellites, it will track by LBS / CELL-ID. And the SMS will
include two positions:
- GPS coordinates of the last known position.

8
-LAC code. Open www.gpstrackerxy.com find “manual track”, and put the received
code in LAC and Cell-ID fields to location by LBS technology.
6.8 Auto track continuously
Tracker can send automatic location reports at set intervals. If SMS mode is
active, reports will be sent as SMS text messages; if GPRS tracking mode is
active, update intervals to the server will be adjusted.
6.8.1 Track with limited times upon time interval:
Send SMS command “fix030s005n +password” to the tracker device, it will report
the
latitude & longitude at 30s intervals for 5 times. (s:second, m:minute, h:hour).
This
command setting must be in 3 digits and the maximum value is 255.
e.g. fix030s005n123456
6.8.2 Track with unlimited times upon time interval:
Send SMS “fix030s***n+password” to the tracker device, it will reply the latitude
&longitude continuously at interval of 30 seconds.e.g. fix030s***n123456
Note: the interval must not less than 20s.
6.8.3 Track upon distance interval
send "distance+password+space+distance", tracker will reply "Distance ok", and
then tracker will locate upon both the pre-set distance.
e.g. Send "distance123456 0050", it means distance is 50 meters; the number
must be 4 digits Arabic numbers.
6.8.4 Track upon time and distance interval:
Send ”fix030s***n+password+space+distance “ tracker will reply "Distance ok",
and then tracker will locate upon both the pre-set time and distance.
6.8.5 Cancel: Send SMS “nofix+password” to the tracker device to cancel the
“auto track”. e.g. nofix123456
6.9 Turning points update automatically
6.9.1The tracker will update the positions automatically to web server once the
vehicle changing driving direction over pre set angle value to form a smooth
trajectory consistent with the actual road, this function works only in GPRS
mode.
6.9.2 Send "angle+password+space+angle" to tracker, it will reply" angle ok". e.g. angle123456
040
6.9.3 The angle must be 3 digits Arabic numbers, default angle value is 30 degree.

9
6.10 GPS drift suppression
6.10.1 This function is deactivated by default, to activate this function, send SMS
"suppress+password" to tracker, it will reply" suppress drift ok". The GPS data stop
updating if vehicle is not driving and latitude and longitude always keep same, and GPS data
updates automatically when vehicle is moving.
6.10.2 send "nosuppress+password" to tracker, it will reply" nosuppress ok ".
6.11 Exact street address
6.11.1 You must set up the APN of your local GSM network for the SIM card in tracker
first before using this function, if there is user name and password for GPRS login, pls
set(Please refer to 6.29 section of this manual to configure the APN, user name and password .)
6.11.2 After configure the APN, send "address+password" to device, it will reply SMS including
real street/address name. For example: No.113, Guankou 2nd Rd, Nantou, Nanshan district,
Shenzhen, Guangdong, china.
6.12 Location based service (LBS) / Cell-ID Locating
If the tracker cannot establish a solid GPS Fix, it will calculate its location using Cell-ID GSM locating,
Location reports will include the GPS coordinates of the last known positions as well as a LAC code,
Entering the LAC code to the “Manual Track” menu of web tracking platform www.gpstrackerxy.com will
enable you to see the tracker’s current location. You can also send command “address+password” to the
tracker to request exact address, track will automatically switch to tracking by LBS in GPRS mode.
Accuracy of LBS depends on the distance to the nearest GSM Network Cell Tower or Base Station.
Note: This feature can be used normally in most areas according to the signal of GSM network. It may not
be available in some areas.
6.13 Monitor
6.13.1 The command to switch between Track mode and Monitor mode are “tracker” and “monitor”.
6.13.2 The default mode is “track” (Track mode).
6.13.3 Send SMS “monitor+password” to the unit, and it will reply “monitor ok!” and switch to
“monitor” mode.
6.13.4 Send SMS “tracker+password” to the unit, and it will reply “track ok!” and switch to “track”
mode.
6.14 Data logging
6.14.1 Auto logging ：When the tracker device lost GSM signals or fall offline from GPRS,
tracker will log the tracking position and alerts automatically in the SD card on the basis of
the pre-set condition, when GSM signals get back, all the event alerts will be auto-sent to the
authorized numbers or web platform (server), but the logged tracking data should be loaded
to the web platform via SMS command.
6.14.2 Logging upon times: Send SMS: “save030s005n+password” to the tracker unit, it will
reply “save ok”, and will log the Latitude and longitude locations every 30 seconds for 5
times. (S: second, m: minute; h: hour).
6.14.3 Multi-logging ：Send SMS:”save030s***n+password” to tracker device, it will reply

10
“save ok”.
6.14.4 Logging Clearance: send SMS: “clear+password” to tracker device, it will reply “clear ok”.
6.14.5 Logging Volume: internal Flash ,Can log 16000 position info
6.14.6 The logged data can be copied to computers through card reader, and then the data route
can be checked by importing data in the menu “Data Import” of web platform
www.gpstrackerxy.com
6.15 Data Load
6.15.1 Current date Load: Send SMS: “load+ password” to tracker device, it will reply: “load ok”
if the device is working well under GPRS mode; if not, it will reply “load fail! Please check
gprs” that means device does not work under GPRS mode.
6.15.2 Specified date Load：Send SMS: “load+ password+ space+ year month date” to tracker
device, it will reply: “load ok” and load the tracking data to the web platform upon the valid
time you choose. For Example: send SMS: “load123456 20110425” to the tracker device,
means to load the tracking data of 25th April 2011 to web platform.
6.16 Decide how many times of alarm message
You can decide how many times of the alarm message to be sent . For those alarm message
sent in cycle, you can limit the times the alarm message to be sent. Send SMS
“ xtime+password+005 “ to tracker, alarm message will be sent 5 times once alarms are
triggered .
Alarm SMS will be sent 5 times by default.
6.17 Alarms
6.17.1 Low battery alarm
Send SMS “lowbattery+password+space+on”, it will send SMS “low
battery+latitude/longitude” to authorized
numbers 2 times in total in 15 minutes interval when voltage of battery is going to be about
3.55V.
This function activates by default, send SMS “lowbattery+password+space+off” to deactivate.
6.17.2 GPS blind Spot alert
This function deactivates by default . Send SMS “gpssignal+password+space+on”, it will
send alert SMS “no gps+last valid latitude/longitude before lost signal”
Send SMS “gpssignal+password+space+off” to deactivate.

11
6.17.3 Geofence
Set up a geo-fence for the tracker device to restrict its movements within a district. The
unit will send SMS to the authorized numbers when it goes out of this district.
Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send
SMS“stockade+password+space+latitude,longitude;latitude,longitude” to unit to set the
restricted district. In case of breach, it will send SMS “stockade!+ latitude & longitude” to
the authorized numbers.
Remark: The first latitude & longitude is coordinate of the top left corner of the Geo-
fence, while the second latitude & longitude is the coordinate of the bottom right corner, it
will send alarm SMS at interval of 3 minutes once beyond the restricted district.
Cancel: Send SMS “nostockade+password” to deactivate this function.
6.17.4 Movement alarm
6.17.4.1 Set up: when the unit stays immobile in a place for 3-10 minutes with GPS signal
reception, the user can send SMS“move+password+space+0200” to the tracker (Suppose
area of a radius of 200 meters, it supports 4 digits at most. Unit: Meter). It will reply
“move OK”. In case of such a movement (the default distance is 200m), it will send SMS
“Move+ latitude & longitude” to the authorized numbers .
6.17.4.2 Cancel: Send SMS “nomove+password” to deactivate .
6.17.5 Over speed alarm
6.17.5.1 Set up: Send SMS “speed+password+space+080” to the unit (suppose the speed is
80km/h), and it will reply “speed OK!”. When the target moves exceeding 80km/h, the
unit will send SMS “speed+080!+ latitude & longitude” to the authorized numbers every
3 minutes .
6.17.5.2 Cancel: Send SMS “nospeed+password” to deactivate .
6.17.5.3 Remark: The recommended speed should be not less than 30km/h. For below that
rate, it will be effected the accuracy by GPS signals drift etc.
6.18 ARM/DISARM by inductive key
Inductive key can ARM DISARM by default .
To activate , send sms " keyarm+password+space+on" to tracker ,it will reply " keyarm
on ok " , and then you can use inductive key to arm and disarm.
To deactivate , send sms " keyarm+password+space+off" to tracker ,it will reply "
keyarm off ok " .
6.19 ARM/DISARM by SMS
6.19.1 ARM

12
Send SMS command “arm+password” to the tracker device, the tracker enter armed state, and It will
reply “Tracker is activated”.
6.19.2 DISARM
Send SMS command "disarm + password" to the tracker device. Tracker enter disarmed state and
reply “Tracker is deactivated”. Then turn off alarm function and will not send alarm if shock sensor
and ACC alarm is triggered.
6.19.3 Set up disarm password
Send command “disarm+password+space+05+space+3” to tracker, the 2 digits number after the first space
means the times put the inductive key to top of the tracker; the number after the second space means error
times restriction, if wrong times exceed this number, tracker will be locked and send alarm to authorized
phone numbers, then disarm can be only operated from web platform or by SMS command.
The default times are 2 times, alarm will be triggered after two times errors.
6.20 Shock sensor Alarm
6.20.1 The tracker has a built-in 3-axis acceleration sensor, the tracker can detect it in arm state when
the bike move, tilt or shock. it wakes up and send SMS “Sensor alarm+lat/long” to the authorized
number, in SMS mode only one message was sent within 3 mins.
6.20.2 Sensitivity of shock sensor configurations:
First level: Alarm will be triggered after detect once slight vibration, send command"
sensitivity+password+space+1" .
Second level: Alarm will be triggered after detect 8 times vibration in 2 seconds, send command"
sensitivity+password+space+2".
Third level: Alarm will be triggered after detect 25 times vibration in 5 seconds, send command"
sensitivity+password+space+3"
6.21 Sleep mode
Sleep Mode
In SMS mode
In GPRS mode
Sleep by
shock
No shock, the unit will enter sleep mode
with GPS off, GSM runs in low power
consumption. Shock, SMS ,calling can
awake the tracker to work.
No shock and no other alarms being
triggered, GPRS disconnected
automatically and enter sleep by
shock mode, and will be back to
online if shock or any other alarms
being triggered.

13
Bicycle
mode I
No shock, the unit will enter sleep mode
with GPS &GSM off and runs in minimum
power consumption, SMS and calling cannot
reach. In arm state, shock can awake the
tracker to work; it cannot awake in disarm
state. Inductive key can awake unit to work
when triggered.
No shock and no other alarms being
triggered, GPRS disconnected
automatically and enter “Bicycle
mode I”, and will be back to online
if detect shock, SMS and calling
cannot awake it.
Bicycle
mode II
No shock, the unit will enter sleep mode
with GPS &GSM off and runs in minimum
power consumption, SMS and calling cannot
reach. In both arm and disarm state, shock
and inductive key trigger can awake the unit
to work
No shock and no other alarms being
triggered, GPRS disconnected
automatically and enter “Bicycle
mode II”, and will be back to online
if detect shock, SMS and calling
cannot awake it.
Scheduled
wake-up
After setting this mode in disarm status, the
unit will runs in minimum power
consumption with GSM &GPS off ,and SMS
or calling cannot reach. At Scheduled time,
the unit will automatically wake to send
Scheduled time report and work for 5
minutes.
GPRS status will works according
the scheduled time, it will be back
online at the scheduled time, GPRS
disconnected and enter “Scheduled
wake-up” mode for all the rest time.
6.21.1 Bicycle model I (Default mode)
Send SMS command to tracker device “sleep+password+space+bicycle1”, tracker will reply “sleep bicycle
1 ok”. In case of no operation in 5 minutes, tracker will enter low power consumption mode, GSM 、
GPS、LED shut off. Neither SMS nor Calling can awake tracker device. Tracker will only be awakened
by shock under ARM state, and won’t be awakened up under disarm states.
6.21.2 Bicycle mode II
Send SMS command to tracker device “ sleep+password+space+bicycle2” , tracker will reply “sleep
bicycle 2 ok”. In case of no operation in 5 minutes, tracker will enter low power consumption mode ,
GSM、GPS、LED shut off .Neither SMS nor Calling can awake tracker device. Tracker device will be
awaken by shock and send message under both ARM and DISARM state.
6.21.3 Sleep by shock sensor
Send SMS command to tracker device “sleep+password+space+shock”, tracker will reply” sleep shock
ok”. It will enter sleep mode if no vibration is detected. GPS、LED shut off. SMS、Calling、Shock can
awake the tracker .

14
6.22 Scheduled wake-up
Send "schedule+password+space+1h", It will awake every 1 hour, automatically send location
message after waking. (m: minute; h: hour; d: day). The maximum time interval is set to three digits,
and no more than 30 days. After sending this message, GPS & GSM module shut off, device running
in lowest power consumption, Calls or messages cannot awake it.
Cancel: After the tracker awake, send “noschedule+password” to deactivate the function.
6.23 Forward The Third Parties’ Message
Send SMS "forward+password+space+third parties phone number" from authorized phone number,
tracker will reply "forward ok", and supports 1 third parties phone numbers at most.
For example, set the phone number of the service provider of the simcard in the tracker, when charge
remind message coming in, tracker will forward it to authorized phone number.
Cancel: Send SMS command “noforward+password”.
6.24 SIM card Balance Inquiry
Send SMS command "balance+password+space+carrier’s phone number+space+code" to tracker, it
will forward the code to carrier’s phone number and return the balance message received from
carrier’s phone number.
How it works: After accept balance command, tracker will remember the “mobile phone number”,
carrier’s phone number and the code;
And then send the code to carrier’s phone number, and forward the message from carrier to mobile
phone number.
Take china mobile for example, mobile users can send “ye” to china mobile number 10086, and
10086 will send user’s balance message to tracker, and then tracker forward the balance message to
mobile phone number , following is an illustration how this function works.
6.25 Check IMEI
Send SMS command "imei+password" to the device. E.g: Send SMS command
"imei123456" to the tracker device, it will reply an IMEI number in 15 digits to
your cell phone.
6.26 Check state
Send SMS:”check+password” to the tracker device, it will reply its current status as:
Battery: 100%
GPRS: ON/OFF
Send balance back
Mobile
balance123456 10086 ye
Tracker
Received and execute
Send ye out to 10086
10086(China mobile)
Received ye from number in
the tracker and process
Received Balance message
Forward balance message to mobile phone

15
GPS: OK/NO GPS
GSM Signal: 1-32 Note: The higher digit it shows; the better.
6.27 Terminal (local) Time Setting
Send SMS command “time+space+zone+password+space+time” to the device, If succeed, it will reply
“time OK”
For example: Send SMS “time zone123456 8”, 8 is Chinese time zone, If your country time zone is
minus, send SMS “time zone123456 -8”.
6.28 Reset Hardware
Send SMS “reset+password” to tracker device to reset the GSM module and
GPS module of the tracker device, it will reply “reset ok”.
6.29 GPRS Setting
User must send SMS via cell phone to set up APN, IP and port before starting
tracking by GPRS.
6.29.1 Configure APN
6.29.1.1 APN standards for Access Point Name and differs from country to country. For more
information about your local APN, please inquire with your local GPRS network operator.
6.29.1.2 Send a SMS command to tracker “APN+password + Space + your local APN” via a cell phone
and if succeeded, the tracker will reply “APN OK”.
For example: Send SMS command “APN123456 CMNET”. If succeeded, the tracker will reply “APN
OK”.
Notes: 123456 refer to password of tracker and CMNET is the
APN of one of china GPRS Network Operator (China mobile).
6.29.2 GPRS User Name and password Setup
6.29.2.1 In most countries, the user name and password involving GPRS login are not compulsorily
necessary, therefore, the entry can be skipped. As for those countries require user name and password,
please configure as following:
6.29.2.2 Send SMS “up+password+space+user+space+password” If succeeded, the tracker will reply
“user, password ok!”

16
For instance, send SMS “upone123456 jonnes 666666” to the tracker, and if succeeded, tracker will reply
“user, password OK”
Note: 123456 is tracker device password, jonnes is the user name for GPRS login, 666666 is the password
for GPRS
6.29.3 Configure IP and Port
Send SMS as below via a cell phone: adminip+password+Space+IPAddress+Space+Port Number. If
succeeded, “adminip OK” is returned by the device in SMS.
E.g. Send SMS command “adminip123456 202.104.150.75 9000” to the tracker device, If succeeded,
“adminip OK” is returned by the device in SMS.
( 123456 is default password，202.104.150.75 is IP，9000 is port).
6.29.4 Switch to GPRS mode
6.29.4.0 Send SMS “GPRS+password” to the tracker, and it will reply “GPRS ok!” it
means the tracker has switched to “GPRS” mode.
6.29.4.1 TCP and UDP switch
Command: "gprs+password,0,0" switch to TCP mode, server will reply to device, this is the default mode.
Command: "gprs+password,1,0" switch to TCP mode, server will not reply to device.
Command:"gprs+password,0,1" switch to UDP mode, server will reply to device.
Command:"gprs+password,1,1" switch to UDP mode, server will not reply to device.
6.29.4.2 Send SMS “SMS+password” to the tracker, and it will reply “SMS ok!” and
restore to “SMS” mode.
6.30 Web Platform and Mobile APP instructions
Users need to register an account on www.gpstrackerxy.com before use web or APP platform,
account name and password is the same on web/APP platform.
6.30.1 Register an account

17
6.30.2 Login
6.30.3 Add a terminal
1.choose the right
server to login in
2.Validate your
IMEI is valid or not
3. Click "register".
Pop-up a dialog box,
register an account
4. Input the newly
registered user ID and
password, click "login"

18
6.30.4 Configure your tracker to web platform to track it online
Step 1：set APN，refer to 6.29.1
Step 2：set GPRS user name and password，refer to 6.29.2
Step 3 ：set IP and port, please use the corresponding IP and port of the server you choose, refer to
6.29.3
Step 4：switch to GPRS mode，refer to 6.29.4
6.30.5 If the tracker is always offline (grey color), make sure the SIM card subscribe the GPRS
service, and have money to surf the Internet, you can use phone to test the sim card can surf the
Internet or not. please check the APN, user name, password, IP, port settings are correct, refer to
6.26.
6.30.6 IOS &Android mobile APP
5.add terminal
6. add terminal
7.Enter IMEI
10. save
11 .the newly registered device
is offline in grey color.
12. After receiving GPRS OK, wait
about one minute, tracker will be
online in green color, you can operate
the tracker,
8.Name
称
9.choose location
icon

19
6.30.6.1Download and install the mobile APP software
According to your phone type, download and install mobile app below the home page
on web tracking platform
6.30.6.2 Login in and use the mobile APP under GPRS version
3.Click”login”
2. Filling the
registered user
ID and
password
3. Choose the
right server
1. CHOOSE
GPRS

20
6.30 .6.3 login in and use the mobile APP under SMS version
1.Choose
SMS LOGIN
3.Click
“login”
2.Use”mc” as
the initial user
ID,password is
8888, change
the user name
and password
after entry
11. Click here to
operate the device