Zotac ZBOX series User manual

1
ZOTAC ZBOX
ZOTAC ZBOX
User’s Manual
No part of this manual, including the products and software described in it,
may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language in any form or by any means,except documenta-
tion kept by the purchaser for backup purposes, without the express written
permission of ZOTAC.
Products and corporate names mentioned in this manual may not be reg-
istered trademarks or copyrights of their respective companies, and are
used for identication purposes only. All trademarks are the property of their
respective owners.
Every effort has been made to ensure that the contents of this manual are cor-
rect and up to date. However, the manufacturer makes no guarantee regard-
ing the accuracy of its contents, and reserves the right to make changes
without prior notice.
CAUTION:
Risk of explosion if the battery is replaced with an incorrect type. Batteries
should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.

2
ZOTAC ZBOX
Table of Contents
Product Specications -------------------------------------------------------------------------- 3
Safety information -------------------------------------------------------------------------------- 4
Setting up your system ----------------------------------------------------------------------- 4
Care during use -------------------------------------------------------------------------------- 4
Welcome --------------------------------------------------------------------------------------------- 5
Package contents ------------------------------------------------------------------------------ 5
Getting to know your ZOTAC ZBOX -------------------------------------------------------- 6
Front view ---------------------------------------------------------------------------------------- 6
Rear view----------------------------------------------------------------------------------------- 7
How to disable the ring LED indicator ----------------------------------------------------- 8
Installing Hardware inside ZOTAC ZBOX ------------------------------------------------- 9
Installing a memory module ----------------------------------------------------------------- 9
Removing the memory module ------------------------------------------------------------- 10
Installing a hard disk -------------------------------------------------------------------------- 11
Setting up your ZOTAC ZBOX ---------------------------------------------------------------- 13
Positioning your ZOTAC ZBOX--------------------------------------------------------------- 15
Installing the stand----------------------------------------------------------------------------- 15
Installing your ZOTAC ZBOX to a monitor ----------------------------------------------- 15
Installing drivers and software --------------------------------------------------------------- 16
Installing an operating system -------------------------------------------------------------- 16
Installing system drivers---------------------------------------------------------------------- 16
Using your ZOTAC ZBOX----------------------------------------------------------------------- 17
Conguring wireless connection ----------------------------------------------------------- 17
Conguring wired connection --------------------------------------------------------------- 17
Using a static IP ---------------------------------------------------------------------------- 17
Using a dynamic IP (PPPoE connection) -------------------------------------------- 18
Conguring audio output via an HDMI /DP device ------------------------------------ 18
SATA RAID User Manual ------------------------------------------------------------------------ 19
Creating a RAID set under UEFI Mode (Default) -------------------------------------- 19
Deleting a RAID set under UEFI Mode --------------------------------------------------- 23
Legacy OS Mode ------------------------------------------------------------------------------ 25
Entering the RAID BIOS utility --------------------------------------------------------- 26
Creating a RAID set----------------------------------------------------------------------- 26
Deleting a RAID set ----------------------------------------------------------------------- 27

3
ZOTAC ZBOX
Product Specications
qMicroprocessor support
v Intel®Celeron® Processor 2961Y (2M Cache, 1.10 GHz)
qOperating systems:
v Windows 7, Windows 8 and Windows 8.1
v 32-bit and 64-bit support
qSystem Memory support
v Two 204-pin SO-DIMMs DDR3L-1600/1333
v Up to 16 GB of memory
qUSB Ports
v Four USB 3.0 ports (one SD card/ USB 3.0 Combo , two rear panel ports and
one top panel port)
qOnboard Serial ATA
v SATA 6.0 Gb/s transfer rates
vSupports two 2.5-inch SATA HDDs or SSDs (support the device with max
9.5mm height)
v Supports RAID 0, 1
qLegacy port
v One COM port
q Onboard Dual LAN
v Supports 10/100/1000 Mbps operation
vSupports IEEE 802.3
q WiFi/Bluetooth support
v Compliant with IEEE802.11ac standard
vHigh speed wireless connection and enhanced wireless security
v Fully qualied Bluetooth v4.0
qOnboard Audio
v Stereo analog audio output and Microphone input
v HDMI 1.4a or DP 1.2 digital output
qGreen Function
v Supports ACPI (Advanced Conguration and Power Interface)
qOnboard Graphics support
vIntegrated Intel® HD Graphics
v HDMI 1.4a (max resolution: 1920x1200 @60Hz)
v DP 1.2 (max resolution: 2560x1600 @60Hz)
qProduct Size
v 188mm x 188mm x 51mm

4
ZOTAC ZBOX
Safety information
Your ZOTAC ZBOX is designed and tested to meet the latest standards of safety for infor-
mation technology equipment. However, to ensure your safety, it is important that you read
the following safety instructions.
Setting up your system
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface with the provided stand. Never use the system
alone without the stand.
Openings on the chassis are for ventilation. Do not block or cover these openings.
Make sure you leave plenty of space around the system for ventilation. Never insert
objects of any kind into the ventilation openings.
Use this product in environments with ambient temperatures between 0℃and 35℃.
 If you use an extension cord, please use the UL listed cord and make sure that
the total ampere rating of the devices plugged into the extension cord does not
exceed its ampere rating.
Care during use
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned off, a small amount of electrical current still ows. Always
unplug all power, modem, and network cables from the power outlets before cleaning
the system.
If you encounter the following technical problems with the product, unplug the power
cord and contact a qualied service technician or your retailer.
¾The power cord or plug is damaged.
¾Liquid has been spilled into the system.
¾The system does not function properly even if you follow the operating instructions.
¾The system was dropped or the cabinet is damaged.
¾The system performance changes.

5
ZOTAC ZBOX
Welcome
Congratulations on your purchase of the ZOTAC ZBOX. The following illustration displays
the package contents of your new ZOTAC ZBOX. If any of the below items is damaged or
missed, contact your retailer.
Package contents
• 1 x ZOTAC ZBOX
• 1 x Stand
• 1 x VESA mount
• 1 x AC Adapter
• 1 x Power Cord
• 2 x Antennas
• 1 x Driver DVD
• 1 x User Manual & Warranty Card
• 1 x Quick Start Guide

6
ZOTAC ZBOX
Getting to know your ZOTAC ZBOX
Front view
Refer to the diagram below to identify the components on this side of the system
1. Headphone/Audio Out jack
The stereo headphone jack (3.5mm) is used to connect the system’s audio out
signal to amplied speakers or headphones.
2. Microphone jack
The microphone jack is designed to connect the microphone used for video confer-
encing, voice narrations or simple audio recordings.
3. Combo USB 3.0 / Memory card slot
The combo USB 3.0 / memory card slot is compatible with USB 3.0 devices and
SD/SDHC/SDXC cards used in devices like digital cameras, MP3 players, mobile
phones and PDAs.
4. COM port
Use the COM port to connect serial devices such as mouse of fax/modems.
5. WiFi LED
The WiFi LED blinks when data is being transfered over WiFi.
6. Hard disk LED
The hard disk LED blinks when data is being written into or read from the hard disk
drive.
7. IR receiver
The integrated IR receiver is used to receive signals from the IR remote control.
8. Power switch
The power switch allows powering ON and OFF the system.
1 2 3 4 5 6 7 8

7
ZOTAC ZBOX
Rear view
Refer to the diagram below to identify the components on this side of the system.
1. WiFi antenna connector
The WiFi antenna connector supports WiFi antenna module.
2. LAN ports
The eight-pin RJ-45 LAN ports support standard Ethernet cables for connection to
a local network.
3. USB 3.0 port
The USB 3.0 port supports the SuperSpeed USB 3.0 devices and is backwards
compatible with USB 2.0/1.1 devices. Use this port for USB 3.0 devices for
maximum performance with USB 3.0 compatible devices.
4. DisplayPort
DisplayPort supports both external (box-to-box) and internal (laptop LCD panel)
display connections.
5. HDMI port
The HDMI (High Denition Multimedia Interface) port supports a UHD device such
as an LCD TV or monitor to allow viewing on a larger external display.
6. Bluetooth antenna connector
The bluetooth antenna connector supports bluetooth antenna module.
7. Power input (DC19V)
The supplied power adapter converts AC power to DC power for use with this jack.
Power supplied through this jack supplies power to the PC. To prevent damage to
the PC, always use the supplied power adapter.
The power adapter may become warm to hot when in use. Do not cover the
adapter and keep it away from your body.
13 4 5 6 72

8
ZOTAC ZBOX
How to disable the ring LED indicator
1. Turn on the ZBOX mini-PC and press <Delete> to enter the BIOS SETUP
UTILITY.
2. Use the arrow keys to navigate to the Power menu and select Logo
Indicator.
3. Press <Enter> and select Turn off.
4. Press F10 to save the conguration and exit.

9
ZOTAC ZBOX
Installing Hardware inside ZOTAC ZBOX
Before installing hardware, please follow the instructions below to remove the cover
of your ZOTAC ZBOX.
1. Unscrew.
2. Gently remove the cover as the image below.
Installing a memory module
1. Locate the SO-DIMM memory slots and insert a SO-DIMM memory module
into the slot at a 45 degree angle.
Note:
1. Users please note that the SO-DIMM slots are under the HDD bracket.
2. When installing two SO-DIMM memory modules, please insert a module into the lower slot rst.

10
ZOTAC ZBOX
2. Gently press down on the memory module until it locks into place by the arms
of the memory slot.
Note: This ZOTAC ZBOX accomodates two DDR3 SO-DIMM memory modules. You must install at least
one module in one of the two slots.
Removing the memory module
1. Locate the SO-DIMM memory slot and gently press the two arms securing the
memory module outwards, as shown in the image below, to release the
memory module.
2. Remove the memory module from the slot at a 45-degree angle.