1 BY ONE 302NA-0012 User manual

1byone Products Inc.
1230 E Belmont Street, Ontario, CA, USA 91761
Customer Service: [phone]
www.1byone.com
LED PATTERN PROJECTOR LIGHT
Model Number: 302NA-0012
Instruction Manual

1
Operate this product according to the following instructions. Failure
to do so may void the product's warranty.
CONTENTS
1x Projector Light with Cable
1x Stake
1x Stand
1x Power Adapter
1x User Manual
PART NAMES
①
②
③
④
⑤
⑥
⑦
①Screw
②Bracket
③Stake
④Power Adapter
⑤Function Button
⑥Screw
⑦Stand
SPECIFICATIONS
Power Input: AC 120V, 60Hz
Power Output: DC 5V 1A
Light Source:White LED Light
Projection Distance: 13-23ft (4-7m)
Control System: Function Button
Operating Temperature: 14ºF~104ºF (-10ºC~40ºC)
IP Rating of Light Body: IP65
IP Rating of Power Adapter: IP44
Product Net Weight: 1.1lbs (518g)
Product Size: 4.25in x 5.4in (108mm x 137mm)

2 3
PROJECTOR LIGHT FEATURES
This projector light is small, lightweight, waterproof, and contains
Automatic changeable patterns. It's great for decorating the home
and garden and also adding atmosphere to parties, birthdays and
weddings.
INSTALLATION
1. Insert the stake vertically into the ground, gently hammering it if
necessary.
Attention: Never attempt to push or hammer the stake into
extremely hard ground; doing so may break the stake. Instead, use
the provided stand.
2. Screw the bracket into the stake.
3. Fix the LED projector light onto the bracket with the screw and nut
and adjust to the appropriate angle.
4. Connect the AC power adapter to a working electrical outlet.
5.When using the stand, screw the bracket into the stand and
connect the AC adapter to a working electrical outlet.
1 2 3
4 5
OPERATION INSTRUCTIONS
1.The projector light will automatically enter a 6hr/18hr on/off timing
cycle when connecting to power.
2. Upon connecting to power, the set default mode will change the
light pattern every 5 seconds.
Press the function button to cycle through the following pattern
change modes.
Patterns change every 5 seconds
Patterns change every 10 seconds
Stay in one pattern which is
ashing when pressed the button.
3.To manually turn off the projector light, press and hold the Function
button for 2 1/2 seconds. Manually turning off the light will stop the
automatic timing cycle.
4. If the projector light is manually turned off but not disconnected
from power, the last used pattern change mode will still be selected
when next turned on.
PRECAUTIONS
1. Avoid direct eye contact with the high-brightness LED light and do
not allow children to operate the projector light.
2.The projector light uses a high-powered LED and so it is normal for
the projector light's body to heat up.
3. Unplug the projector light from power when it is not in use.
WEEE Directive & Product Disposal
Do not dispose of the projector light in household or general
waste.Take the light to a collection point for electrical and
electronic equipment recycling.

Customer Service/Kundenservice/Service Clients
Atención al cliente/Assistenza Clienti/ カスタマーサービス
US
To ensure speedy handling of
your issue, please call or email us
for assistance.
Phone: [phone]
(Mon-Fri 9:00am - 6:00pm PST)
Email: [e-mail]
UK
To ensure speedy handling of
your issue, please call or email us
for assistance.
Phone: [phone]
(Mon-Fri 9:00am - 6:00pm UTC)
Email: [e-mail]
FR
Pour vous assurez une assistance
rapide en cas de problème,
veuillez envoyer un e-mail.
Email: [e-mail]
IT
Per supporto immediato in
caso di bisogno, la invitiamo a
contattarci via email.
Email: [e-mail]
CA
To ensure speedy handling of
your issue, please email us for
assistance.
Email: [e-mail]
DE
Für eine zügige Bearbeitung
ihres Problems, melden Sie sich
bei uns wie folgt.
Email: [e-mail]
ES
Para garantizar una rápida
atención de su problema, favor
envíenos un email para ayudarle.
Email: [e-mail]
JP
お客様の問題が直ちに解決される
ため、ぜひメールにて弊社までご
連絡ください。
Eメール：[e-mail]