3dvisionlabs HemiStereo NX User manual
HemiStereo®NX
Quick Start Guide
Links
Quick Start Guide
3dvisionlabs.com/start-nx
Full Documentation
3dvisionlabs.com/docs
Software Download
3dvisionlabs.com/downloads
Need assistance? We‘re glad to help!
Safety Notes Compliance Statements
−
−
−
Product OverviewGet Started
Remote Access
Connect to
Local Network
Connect
Power Supply
Download
HemiStereo Viewer
Host Access
Connect
Peripherals
Connect
Power Supply
Log In
(user: hemistereo /
pw: hemistereo)
123
123
Right Camera Left Camera Cooling Fins
Mounting Interface
Power LED
USB 2.0 Micro-B
Ethernet RJ-45 USB 3.0 Type-A
Display
DC Power
Use the power supply shipped with the product.
Always make sure to use the mounting interface
shown below.
Please make sure the cooling fins are in free air and
allow sufficient convection.
Always disconnect power supply before connecting
peripheral devices.
−
20
1/4-20 UNC (7.7mm)
2x M4x0.7 (6.0mm)
or
−
−
−
WEEE Reg.-No: DE 26630229
WEEE-Notice:
This product may not be treated as household
waste. If you wish to discard this product, please
contact your local authorities, the supplier of the
product or the manufacturer.
Manufacturer:
3dvisionlabs GmbH,
Technologie-Campus 1,
09126 Chemnitz, Germany
Compliance and Warranty:
For regulatory compliance information, warranty
information, usage guidelines and technical
support please refer to the according chapters in
the product documentation.
Visit: https://docs.3dvisionlabs.com/hs-nx
