3nStar T705-01W User manual

Model: T705-01W

1. Reset
2. TF Card Slot
3. DC Socket
4. Micro USB
5. Eearphone Jack
6. Power On/Off Button
7. Rear Camera
1

Content
1. Announcements ………………………………………………………………3
2. Introduction ……………………………………………………………………4
2.1 Packing Details……………………………………………………………………….....4
2.2 Technical Specifications. …………………………………………………………………..4
3. Quick Guidance …………………………………………………………………4
3.1 About Touch Panel………………………………………………………………..........4
3.2 Switch On/Off. ………………………………………………………………........................4
3.3 Power Save Modes and lock screen………………………………………………………5
3.4 Battery management and charging. ………………………………………………………5
3.5 Definition for the icons of the Functions…………………………………………………6
3.6 USB HOST Function………………………………………………………………..............6.
3.7 TF Card Storage………………………………………………………………......................7
4. Network Access ………………………………………………………………7
4.1 Network Access by Wi-Fi……………………………………………………………….......7
5. Storage File Copy & Delete from PC……………………………………8
6. Main Functions Introduction ………………………………………………9
6.1 Internet Browser…………………………………………………………………………9
6.2 Email Setting…………………………………………………………………………10
6.3 APK Installation……………………………………………………………………11-12
7. FAQ…………………………………………………………………………13
2

1. Announcements
1. Please keep the device away from moist and dust.
2. Do not put the device in high-temperature environment, especially closed car in hot weather.
3. Do not drop or strike the device.
4. Do not shake the device violently, especially the LCD Screen part. Or, it will cause abnormal
display on the screen.
5. Please choose proper volume when using the earphone which will be good for your ear.
6. Please charge the device when
(1) The power icon shows lowest power.
(2) The device is turned off automatically, and when you turn on it, it is turned off
automatically again.
(3) No response when operating the buttons.
Attention: Please use the charger offered by manufacturer to charge, other charges may
causes damage to the device.
Input: 100-240V ~ 50/60 Hz
Output: 5V 2500 mA
7. Do not disconnect the device from PC when downloading, uploading or formatting, or it will
cause programming errors of the device.
8. Do not dismounting the device privately without professional guidance.
9. Do not use alcohol, thinner or benzene-chemical to clean the surface of the device.
10 . Do not use the device in forbidden place, like airplane.
11 . Please back-up your files in device’s memory always. The manufacturer is not responsible for
the clear of files after damage or repair of the device.
12 . The manufacture reserves all right of device’s technology and design, and will have no
obligation to inform the user if there are new versions or designs been developed.
13 . The device is NOT water-proof; please keep it away from water.
The turn on time of this device is about 30 seconds; please don’t operate the device when it is
turned on in 30 seconds.
3

2. Introduction
2.1 Packing Details.
Each unit of Tablet PC has the following items: Tablet PC device*1, charger*1, USB cable*1,
OTG cable*1 and user manual*. All items are packed in gift box.
2.2 Technical Specifications
Screen 7 inch capacitive Multi touch screen , Resolution: 1024 x 600. 16:9
CPU Chipset: Rockchip3026(Dual Core);ARM Cortex A9 1.2GHZ
RAM DDR3 1GB
Storage 8GB NAND Flash（Micro Sd Card Max to 32GB）
System Android 4.2
Network Wifi: Built-in Wifi Module. IEEE 802.11b/g/n. 11Mbps to 54Mbps
3G: External 3G by USB Dongle.
Applications APK format applications
Video RM, RMVB, AVI, MOV, WMV, MP4, ASF, 3GP, TS, MKV, MPEG, etc. All videos
support HD 2160P.
Music MP3, WMA, WAV, APE, FLAC, AAC, OGG, etc.
Pictures JPG, JPEG, GIF, BMP, PNG
Ebooks TXT, EPUB, PDF,WORD,EXCEL, POWERPOINTS
Office Files Supported files: Word, Excel, PDF, etc.
PC Connection Micro USB
Battery Built-in Lithium Battery:2500mAh
3. Quick Guidance
3.1 About Touch Panel
The touch screen is capacitive touch screen; you can use five fingers to touch the screen at the
same time.
3.2 Switch On/Off.
Switch On and Unlock: When the device is in the OFF mode, press and hold “Power” key for 3
seconds to enter the Android startup progress bar, it need about 30 seconds enter to the system
desktop, when the LCD is under locked mode, please press and sleek the icon to right side,
then the LCD will unlocked automatically, see the figures below,
4

3.3 Power Saving Modes and lock screen.
Press the “POWER” key shortly after starting up, system enter to power save and lock mode.
Press the “POWER” key , system will return to bright in 1 second
The primary operation of the device will not stop under the power save mode, just the LCD is
shut and with black screen. For example: playing music, etc
Switch OFF: When the device is in the OFF mode, press and hold the “POWER” key for 3
seconds, the screen will display the power off interface, choose the power off item to confirm,
the system will shut automatically
【Note】When the device with low battery it will alarm continuous and shut automatically without
charging. If the device can not start up please check if the battery is low, and try it again after the
battery is charged.
3.4 Battery management and charging.
3.4.1 Charge the battery for 6-8 hours to make sure the battery is fully charged when firstly use.
3.4.2 Insert the power adaptor output plug into DC slot on the device, and connect the other side
with the power socket. Then the desktop icon of the battery keep rolling which shows it is charging,
please wait until the battery is fully charged, don’t disconnect the power when charging. Once the
battery is fully charged, the Icon on the desktop will stop rolling.
【Note】In order to keep the battery working in the best condition, please pay attention as below:
Please don’t charge the power in high temperature.
No need to release the power for this Li- battery, you can charge the power even there is still
some power in the battery, no need to wait it runs out.
In order to keep the battery in good condition, please make sure to charge the power once per
two weeks if you don’t use this device for a long time.
5

3.5 Definition for the icons of the Functions
Icon Function
instruction Icon Function instruction
Back to main menu Note when the system
finds new devices.
Show current
power status Set the alert time
The current
system time Reduce the volume
Back Louder the volume
Menu Menu for Function Block.
Google search Adjust screen brightness
System clock WIFI on/off
New mail USB Connection
Status Bar
3.6 USB HOST Function
3.6.1 USB- HOST Definition
The Micro USB on the device can be used as USB Host via the attached OTG cable.
3.6.2 Read U-disk:
Insert the U-disk into the OTG host and connect to the device, press the “Explorer” in the
6

desktop, press USB enter into u-disk.
3.7 TF Card Storage
There is a TF card slot in this device, it support reading the files in TF card. Insert the TF card
into the card slot in right way, when take it out, just push the TF toward to the inside, then the
slot will release the TF card, the TF card will pop out automatically, take it then.
3.7.1 Please insert the TF into the card slot in the right side of the device.
3.7.2 Don’t pull out the card when operating ( reading, copying), or it may cause data error.
3.7.3 Don’t use the TF card under high temperature condition.
3.7.4 Keep the TF card far from the liquid and erosive materials.
4. Network Access
The device support Wi-Fi network and external 3G network.
4.1 Network Access by Wi-Fi
4.1.1 Turn on Wi-Fi, and Press Wi-Fi settings. The device will scans automatically for available
Wi-Fi networks.
4.1.2 Choose the Wi-Fi network that you want to connect to.
4.1.3 Press Connect. Some network may need you input the password.
4.1.4 On the Wi-Fi settings screen, press the Menu key, touch Advanced, you will get more
settings for Wi-Fi.
7

5. Storage File Copy
A) Connect the device to computer by USB Cable, there will be notification in the status bar that
USB connected.
B) Choose USB Connected
C) Choose USB Connected. Then, Turn on USB storage.
The left picture shows that device storage content could be viewed and modified from computer.
The right picture means that device storage content could NOT be viewed or modified from computer.
8

6. Main Functions Introduction
6.1 Internet Browser
Before you use internet browse function, please make sure your network is connected. See
network access guidance in former part.
Click IE Browser icon to enter to the IE interface, click the address bar and input
website and click Go to enter a corresponding web page, you can view the corresponding
website information.
Click icon to add bookmark
Click menu icon to view history record and bookmark.
9

The device also supports other internet browsers, detail functions of those internet browsers
refer to their own instructions.
6.2 Email Setting
Before you use email function, please make sure your network is connected. See network
access guidance in former part.
When you firstly use this function, you need to add an email account to the device. The device
supports several accounts working together.
Portal sites email accounts and enterprise email account adding methods are different.
Add portal sites email accounts. ( Example: Gmail, MSN, Yahoo, etc. )
Take Google email account for an example here.
Account: dxtreme.com.au
Password: *********
For portal sites email accounts, directly input your email address and password, then click
next.
After successful connection, input Account Name and Your Name.Account Name means the
name of this account in the device, Your Name means the displayed name of your email in
receivers’ account.
Then you will access the account. Click email titles to read emails, long press email titles to
access options.
Accounts: View accounts in the device, add new accounts, delete accounts, set main account.
Accounts settings: More options for email account.
10

6.3 APK Installation
This device supports the third party’s Application Package (APK format) based on Android
OS. Many Application Package can be downloaded from internet, or copied from other
devices into the storage.
If the Application Package is not downloaded from Google Android Market, you should
operate the following steps before installation. Please check Settings –Security, make sure
Unknown sources is chosen.
Click the Explorer icon
and Choose the file you want to install APK, press prompted to install
6.3.1 Install: Click Install, enter into the APK installer interface.
Internal Memory means built-in Flash memory, SD card means inserted T-Flash;
After entering, select the APK format setting program in the right side, click the application
to install, back to the main interface when complete this operation, then it finished the
installing, and there will be a relevant icon in application list.
11

6.3.2 Manage: Click settings and Choose APPS
Click the APPS, Choose the file you want to cancel software
Click the software, uninstall the software.
6.3.3 Exit: Go back to the main interface.
Note: All installed applications will be shown in application list menu. Here applications include
games, chatting TM, internet browser, media player, system tool, etc.
12

7. FAQ
1) How can I change languages if I mistakenly choose an unknown language?
·Find setting icon in Menu Page to enter Settings.
·Then, choose icon to enter language & keyboard setting, the first option is language setting.
2) How can I change input when I am typing?
Long Press the blank where you are typing, there will be popup to choose inputs.
3) I already installed some applications, but I can not find them now, why?
·By default, some applications are installed in external TF card, so if you fetched out the TF card
from the device, you will not see these applications.
4) The machine can not be turned on.
·Check the battery and charge it if there is no power.
·Connect the machine to AC Adapter.
·Contact the seller if the machine still can not be turned on after charged.
5) There is no voice in the earphone.
·Check if the device is in Mute mode.
·Check the volume setting in case it is 0.
·Check the connection of earphone.
6) Why I can not install applications?
Please check Settings –Security, make sure Unknown sources is chosen.
7) There is Error Codes on the screen.
·System error, restart the device.
·The language you are browsing is not supported by built-in languages, please contact the original
manufacturer to debug.
8) There are problems of system, many popup of error.
Restart the device by POWER button for 10 seconds, the device will restart
If you have restarted the device and error popup still exist, you can check active applications
to see if there is any unknown application, uninstall it if any.
There may be virus in the device, please install security applications and protect your device.
If you have problems after above operations, the device’s firmware needs rebuilt ( the
operation is named “flash”). Notice: Before you flash the device, please back up your
storage, the flashing will make all settings and files turn to factory default. Flashing
operation need flashing tool and firmware, please contact original manufacturer for flashing
operation.
13