A-MTK AH21K9M User manual

A-MTK PnP Solution
Introduction & User Guide
Panoview
i-Panoview Wireless Cube Camera

3

Step 4:
Type your Wifi password
Step 1:
Plug-in Antenna and
plug-in 12V 1A power
adaptor
Plug-in 12V 1A power adaptor
Plug-in Antenna
Step 2:
Open the APP
“Panoview” in your
smart phone and click
“First Install”
Step 3:
Click “WIFI”
4
First Install When you first start the IP camera
Reset When you forget password, or change
access point, pls reset IP camera
Add local camera Apps will auto search same IP camera
under same access point
Add remote
camera
Input “DIPS ID” to add IP camera

Step 5:
Searching for wireless
cameras in same
network environment
Step 6:
It will automatically find
the camera.
“Set” camera password
or “skip”.
Step 7:
Set your camera name.
For Ex.: Office 1
Step 8:
Camera setup successful.
5

Click the red marked button,
to get in camera settings Camera Settings Menu
“Edit” your camera name (See page 7)
“Delete” the camera
“Modify” your password (See page 7)
“See” your SD card status (See page 7)
“Change” camera color and brightness (See page 8)
“Update” camera firmware (See page 8)
“Check” your camera's network status (See page 8)
6

7
Edit Camera:
Set your new camera
name or mark “Only
this device can view” to
lock the camera
Modify Password:
Set your new password
SD card Setting:
If you first time mount a
SD card to the camera
make sure you “format”
and see the ”ready”
status

8
Camera Image:
Here you can change
the “Color, Brightness,
Contrast, Sharpness and
180 degree rotation” of
the camera
Firmware Update:
Time to time you can
check this page to see is
there a new Firmware
available or not
Network Status:
Here you can see the
Network Status of the
camera

Main Page:
Vertical View
Snapshot
Record
Digital Zoom in and out
Turn on build-in speaker
Turn on build-in microphone
Split Screen 1 or 4
Playback menu
Event Settings
Icon description:
Horizontal View
9

10
Edit Settings Menu:
Motion Detection: Turn On
Mark the area you want to
motion detect and adjust the
sensivity
Audio Detection: Turn On
Adjust the sensivity of the
audio detection

11
Camera Tampering: Turn On
It can trigger condition that
when the camera detects that
is being tampered with.
For Ex.: redirection, blocking,
defocusing
PIR Detection: Turn On
PIR based motion detection
measures infrared (IR) light
radiating from objects in its
field of view
Recording: Turn On
By any event trigger it will
record to you SD card or
Cloud server