A SYSTEMS MK20W User manual
User’s Manual
Pan/Tilt/Zoom Camera
MK20HD PLUS
MK20W
2
MK20HD PLUS / MK20W
English
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
1. Read these instructions – All the safety and
operating instructions should be read before this
product is operated.
2. Keep these instructions – The safety and
operating instructions should be retained for
future reference.
3. Heed all warnings – All warnings on the appliance
and in the operating instructions should be
adhered to.
4. Follow all instructions – All operating and use
instructions should be followed.
5. Do not use this apparatus near water – The
appliance should not be used near water or
moisture – for example, in a wet basement or
near a swimming pool, and the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacture’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
heat.
9. Do not defeat the safety purpose of the polarized
or grounding plug. A polarized plug has two
blades with one wider than the other. A grounding
plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for
your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at the plugs, convenience
receptacles, and at the point where they exit from
the apparatus.
11.
the manufacturer.
12. Use only with the cart, stand, tripod,
manufacturer, or sold with the
apparatus. When a cart or rack is
used, use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
13. Unplug the apparatus during lightning storms or
when unused for long periods of time.
14.
Servicing is required when the apparatus has
been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
15. CAUTION: These servicing instructions are
reduce the risk of electric shock, do not perform
any servicing other than that contained in the
do so.
16.
building-in space such as a book case or similar
unit, and remain a well ventilation conditions at
open site. The ventilation should not be impeded
by covering the ventilation openings with items
such as newspaper, table-cloths, curtains, etc.
17. WARNING: The mains plug/appliance coupler is
used as disconnect device, the disconnect device
shall remain readily operable.
18. This apparatus is for professional use only.
19. WARNING:
shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to
liquids, such as vases, shall not be placed on
apparatus.
20.
an equilateral triangle is intended to alert
the user to the presence of non-insulated
“dangerous voltage” within the product’s
magnitude to constitute a risk of electric
shock.
Warning: To reduce the risk of electric shock, do
not remove cover (or back) as there are no user-
personnel.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance instructions in the literature
accompanying the appliance.
21. Protective earthing terminals. The
apparatus should be connected to a
mains socket outlet with a protective
earthing connection.
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
ATTENTION
AVERTISSEMENT: POUR REDUIRE LE RISQUE DE CHOC
ELECTRIQUE, NE RETIREZ P AS LE COUVERCLE (OU L'ARRIERE),
PAS DE PIECE RE PARABLE PAR L'UTILISATEUR A L'INTERIEUR
CONFIEZ LES RE PARATIONS A UN PERSONNEL QUALIFIE .
IMPORTANT SAFETY INSTRUCTIONS
1
MK20HD PLUS / MK20W
English
Placement
● This device may interfere with radio and
televisionreception.Donotusethisdevicein
thevicinityofsuchreceivers.
● Noise may be produced if wireless
communications devices, such as cell
phones, are operated in the vicinity of this
unit. Such noise could occur when receiving
orinitiatingacall,orwhileconversing.Should
you experience such problems, you should
relocatesuchwirelessdevicessotheyareata
greaterdistancefromthisunit,orswitchthem
off.
●Donotexposetheunittodirectsunlight,place
itneardevicesthatradiateheat,leaveitinside
anenclosedvehicle,orotherwisesubjectitto
temperature extremes. Excessive heat can
deformordiscolortheunit.
● When moved from one location to another
wherethetemperatureand/orhumidityisvery
different, water droplets (condensation) may
form inside the unit. Damage or malfunction
mayresultifyouattempttousetheunitinthis
condition.Therefore,beforeusingtheunit,you
must allow it to stand for several hours, until
thecondensationhascompletelyevaporated.
● Depending on the material and temperature
ofthesurfaceonwhichyouplacetheunit,its
rubber feet may discolor or mar the surface.
Youcanplaceapieceoffeltorclothunderthe
rubberfeet topreventthisfromhappening.If
youdoso,pleasemakesurethattheunitwill
notslipormoveaccidentally.
● Do not put anything that contains water on
this unit.Also, avoid the use of insecticides,
perfumes,alcohol,andnailpolish,spraycans,
etc.,neartheunit.Swiftlywipeawayanyliquid
that spills on the unit using a dry, soft cloth.
viewing such images can cause headache,
nausea, or other discomfort. Do not use this
unit to create video that might cause these
typesofhealthproblems.Asystemswillaccept
noresponsibilityforanysuchhealthproblems
thatmayoccurinyourselforinviewers.
IMPORTANT NOTES
Read First!
Prior to the operation of this unit, please
thoroughly read through the Owner’s Manual
in its entirety, these sections provide important
and comprehensive information concerning the
properoperationofthisunit.
TheOwner’sManualshouldbesavedandkept
forfutureuseandreferences.
The digital version of this manual is available
onlineatAsystems’websitefordownload.
Power Supply
● Do not connect this unit to same electrical
outlet that is being used by an electrical
appliance that is controlled by an inverter
or a motor (such as a refrigerator, washing
machine,microwaveoven,orairconditioner).
Depending on the way in which the electrical
appliance is used, power supply noise may
causethisunittomalfunctionormayproduce
audible noise. If it is not practical to use a
separate electrical outlet, connect a power
supply noise filter between this unit and the
electricaloutlet.
● Topreventmalfunctionandequipmentfailure,
always make sure to turn off the power on
all your equipment before you make any
connections.
● AlthoughtheLCDandLEDsareswitchedoff
whentheunitisturnedoff,thisdoesnotmean
thattheunithasbeencompletelydisconnected
fromthesourceofpower.Ifyouneed toturn
offthepowercompletely,firstturnofftheunit’s
switch, then unplug the power cord from the
power outlet. For this reason, the outlet into
whichyouchoosetoconnectthepowercord’s
plug should be one that is within easy reach
andreadilyaccessible.
WARNING:
To prevent injury, this apparatus must
be securely attached to the floor/wall in
accordancewiththeinstallationinstructions.
WARNING:
Installation should only be performed by
qualified installation personnel. Improper
installationmayresultintheentireapparatus
fallingdownandcausinginjury.
2
MK20HD PLUS / MK20W
English
Overview........................................................................................... 1
Features........................................................................................... 1
Characteristics.................................................................................. 2
CameraAnatomy.............................................................................. 3
ChecktheIncludedItems................................................................. 5
PrecautionsforInstallation............................................................... 6
CeilingMountInstallation................................................................. 8
TripodMountInstallation.................................................................. 11
PrecautionforUse............................................................................ 12
HowtoConnecttheUnit................................................................... 13
TallyConnections............................................................................. 13
IPCameraMatrixSetupManager.................................................... 14
DIPSwitchSetting............................................................................ 16
OperatingPrecautions...................................................................... 17
IRRemote........................................................................................ 19
CameraSettings............................................................................... 20
LayoutofWirelessRemoteControlIRSensorAreas....................... 21
IRRemotePartsandFunctions....................................................... 22
RecordingandCapture.................................................................... 25
WebcamEmulationSetupGuide..................................................... 28
Specications................................................................................... 30
Troubleshooting................................................................................ 31
TABLE OF CONTENTS
Asystemsreservestherighttoalteranyinformationcontainedwithinthismanualwithoutpriornotice.
V1.101/30/2019
1
MK20HD PLUS / MK20W
English
INTRODUCTION
CongratulationsonpurchasingyourPan/Tilt/ZoomCamera,theMK20HDPlus,byAsystems!
Introducing theAsystems MK20HD Plus & MK20W, all new PTZ remote cameras. Equipped with a
1/2.8”HD2.4 Megapixel CMOSimagesensor and awidefocal ratio of1.6to 2.8coupledwith30x
opticalzoom,theMK20HDisAsystems’answertothegrowingdemandoffullHDPTZcameras.The
MK20Wgoesfurthertoincludea0.39xmagnifyingwide-anglelens.
TheMK20HD PlusandMK20Wbothutilizeaquietdirect-drivepan/tiltmechanism,allowingthemto
naturallyblendinwiththeenvironmentandcapturedesiredimageswithoutinterferewiththeongoing
program. Plus the compact size and light weight body make MK20HD Plus and MK20W ideal for
numerousapplicationssuchasauditoriums,concerts,studios,realityshows,andeducationalfacilities.
Before operating and exploring the capabilities of the MK20HD Plus and MK20W, it is highly
recommended that you carefully read through Precautions for Installation and Safety Instructions
sectionrstforsafeoperationwhileavoidinghazardoussituations.
OVERVIEW
●MK20HDPlusandMK20WarecompactfullHDcameraswithanintegratedpan-tiltheadand
featuringa1/2.8”HD2.4MegapixelCMOSimagesensorandawidefocalratioof1.6to2.8
coupledwith30xopticalzoom.
●Featuring an uncompromising and superior optical 30x zoom lens, the MK20HD Plus and
MK20Wachievetruehigh-definitionvideoshootingthatoverflowswithambiance.
●MK20HDPlusandMK20WsupportRS422standardserialinterfaceforlongrangesignaltransmission
forupto1000meterplusLANconnectivityforuseofupto25camerasoffonecontroller.
●MK20HD Plus and MK20W are designed from the ground up to be fully compatible with
Asystems’arrayofvideoproducts,includingAVseriesvideoswitchersandremotecamera
controller,MK20RCPlus,eachsoldseparately.
FEATURES
●1080pvideooutputat30fps
●30xOpticalZoom
●1/2.8”Exmor™CMOS2.4MegapixelSensor
●TransmitInterfacevideoupto70mviaCAT5/6cable
●SupportPTZVISCAControlProtocol
●FastPan&TiltSpeed(Pan:300°persecond;Tilt:125°persecond)
●WidePanAngle(360°)
●FullremotecontrolfunctionwithMK20RCPlusconsole;basicPTZremotefunctions
withAsystemsvideoswitchers.
●SupportsRS422directconnectivityorlocalareanetworkconnectivity
2
MK20HD PLUS / MK20W
English
CHARACTERISTICS
●Exmor™CMOS2.4MegapixelSensorandhigh-performance30xzoomlensfeatured
●ManualNightMode
4Auto and manually adjustable iris and exposure settings for best viewing result in any given
condition,eveninlow-lightcondition.
●Easyoperationofunitenabledbyitsintegrationwithahigh-performancepan-tiltheadunit
4FastPan-Tiltspeed,operationsatthehighspeedofPanning:300°/Sec;Tilting:125°/Sec.
4Widerotationalangleswithapanningrangeof360°andatiltingangleof125°
●HighdegreeofcompatibilitywithAsystems’currentlyavailablecontroller,MK20RC,MK20RC
PlusandAVseriesvideoswitchers,enablingaflexiblesystemsetup.
4Amaximumoftwenty-fiveunitscanbeoperatedbyserialcontrolfromAsystems’MK20RCPlus
controller.UptofiveunitscanbeoperatedviatheMK20RC(throughRS422).
●Integratedpan-tiltheadunit,cameraandlenstofacilitateinstallation
4Bydesigningthecamera,lensandpan-tiltheadasasingleintegratedunit,thetimetakenforthe
installationworkhasbeendrasticallyreduced.
●Awirelessremotecontrolisincludedforeasyoperation
4Awirelessremotecontrolcapableofoperatingupto3unitscanbeused.Itcaneasilybeusedto
setthevariousfunctionsorswitchbetweenthemwhileviewingthemenuscreens.
●Flexiblecameralayoutenabledbysimpleconnectionandinstallation
4TheMK20HDPlusandMK20Wfeatureexcellentconnectivityandinstallationwhichenablesthe
usertoinstallitwithease,mayitbetabletopmountedorceilingmounted.
Note: Please bear in mind that the unit is designed to be used in indoors only. Outdoor
environment and conditions will result in accelerated deterioration and damages to the unit.
Pleaseonlyusethisunitinacontrolledoutdoorenvironment.
3
MK20HD PLUS / MK20W
English
CAMERA ANATOMY
Tally Lights
144mm
197mm
Standby LEDPower LED
Front IR Sensor
125mm
DIP (30 to 60fps)
RS422 IN
POE, LAN and
Streaming
Kensington Lock
Interface Out SD Card Slot
SDI Out
Rear IR Sensor
Tally In
FrontView
RearView
Interface
4
MK20HD PLUS / MK20W
English
swivel base
90mm
VESA Mount
5mm
75mm
TopView
BottomView
5
MK20HD PLUS / MK20W
English
CHECK THE INCLUDED ITEMS
Uponunboxingtheproduct,pleasecarefullyinspecttheincludeditems,intheunlikelyeventofany
missingordamageditems,pleasecontactyourauthorizedretailer/distributorforreplacements.
MK20HDPlus/MK20W
IRRemotewith2AAABatteries
CeilingMountBrackets(A&B) TripodMount
Owner’sManual
DropPreventionWire
POEPowerAdapter
User’s Manual
Pan/Tilt/Zoom Camera
MK20HD PLUS / MK20W
MainUnitMountingScrew(M4)x4
BracketMountingScrews(M3)x3
DropPreventionWireScrews(M3)x2
A
B
6
MK20HD PLUS / MK20W
English
PRECAUTIONS FOR INSTALLATION
To Installation Personnel
Readthe“InstallationInstructions”thoroughlyandthenperformtheoperationcorrectlyandsafely.
Also,alwaysreadthe“Readthisrst!”ofthismanualastheycontainimportantinformation.
Afterinstallation,givethe“Owner’sManual”tothecustomerforfutureuse.
Ensure that the installation work complies
with the technical standards governing
electrical equipment.
This unit is for indoor use only.
Itcannotbeusedoutdoors.
Avoid installation in a location where the unit
willbeexposedtodirectsunlightforextended
periodsornearacoolingorheatingappliance.
Otherwise, deformation, discoloration,
malfunctioning and/or problems in operation
mayresult.Operatetheunitwhereitwillnotbe
splashedorsprayedbywater.
Use the unit with an installation where the
unit is suspended from an overhead surface
or with a stand‑alone installation.
Do not use the unit on its side or tilted at an
angle.
Concerning the installation location
Installtheunitinastablelocationwhichwillnot
besusceptibletoshaking.Iftheunitisinstalled
in a location which is susceptible to shaking,
this will cause the unit’s images to shake in
turn.
Install the unit after conferring in detail with
yourdealer.
Installtheunitonaceilingthatisstrongenough
(suchasaconcreteceiling).
Ifthe unitistobeinstalledonaceilingwhich
is not strong enough, reinforce the ceiling
sufficientlyfirst.
Do not install or use the unit in the following
kinds of locations.
●Onwallsorwheretheunitwouldbeinstalled
sideways.
●Inlocations(includingplacessuchasunder
theeavesofabuilding)wheretheunitwould
bedirectlyexposedtorainorwater.
●Inlocationssuchaskitchenswherethereare
highconcentrationsofsteamandgrease.
●In outdoor locations or hot places where the
temperaturewillexceed50°C(122°F).
●In cold locations where the temperature will
dropbelow0°C(32°F).
●Locationswherethehumiditywillexceed85%.
●Inlocationswherechemicalsareused.
●Atsea,incoastalareasorinlocationswhere
corrosivegasesareemitted.
●Inlocationswhereradiation,X-rays,orstrong
radiowavesormagneticfieldsaregenerated.
●Locationswherethe unitwouldbe subjectto
a great deal of vibration such as on board a
vehicleorship.
●Inlocationswherethetemperatureissubject
tosuddenchangessuchasneartheairoutlet
of an air conditioner or near a door which
allowstheoutsideairtocomein.
What to avoid to ensure that the unit will
perform stably over a prolonged period
●Using the unit for a prolonged period in a
location with high temperature and humidity
levels will cause its parts to deteriorate and
shortenitsservicelife.
●Ensurethata coolingunitorheating unitwill
notblowanyairdirectlytowardtheinstallation
location.Be absolutely sure to use the
supplied brackets and screws to install the
camera
●Do not mount the unit by employing any
methodsotherthanthosespecified.
●Do not remodel the mounting bracket or
mountingscrewsprovidedwiththeunit.
When the unit is no longer going to be used,
do not leave it lying around, but be absolutely
sure to dispose of it properly.
When installing, transferring or disposing of
the unit, be absolutely sure to hold it by its
pedestal area.
7
MK20HD PLUS / MK20W
English
Do not attach a filter, hood, extender or
other parts to the unit.
Use the dedicated AC adaptor and power
cable provided with the unit.
ConnecttheACadaptorandpowercabletothe
powerinletsecurely.
Installing the AC adaptor
●Do not place the adaptor directly onto a
ceilingpanelorothersuchsurface.Extreme
danger is posed when water has collected
on the surface as a result of leaking rain,
for instance. Secure the adaptor firmly to
thebottomorothersurface ofareinforcing
membermadeofchannelsteel where dust
andotherforeignmatterwillnotaccumulate.
●Secure the adaptor firmly so that there
will be no chance that it will fall off or fall
down.Secureitusingastrengthwhichcan
withstandthemassoftheACadaptor.
Install the accessory AC adaptor near the
main power outlet, and position it in such a
way that its power plug can be plugged into
and unplugged from the outlet easily.
When connecting theAC adaptor to a power
outlet on the ceiling or on any other surface
where dust may collect, wipe off the dust on
thepowerplugatperiodicintervalsasananti-
trackingmeasure.
Power switch
This unit does not have a power switch.
The power turns on when its power plug is
connectedtoapoweroutlet.Whenthepower
is turned on, the pan, tilt, zoom and focusing
operations are performed. Before proceeding
with maintenance, be absolutely sure to
disconnect the power plug from the power
outlet.
Connecting the power cable
Be absolutely sure to connect the power cable
oftheACadaptorthroughacircuitbreakerusing
oneofthefollowingmethods.
(1) Connect the power cable through a power
controlunit.
(2)Connectthepowercabletoacircuitbreaker
in a power distribution panel with a contact
distanceof3.0mmormore.Useacircuitbreaker
which is capable of shutting off all the poles of
themainpowersupplywiththeexceptionofthe
protectivegroundconductor.
(3)InstalltheACadaptornearthepoweroutlet,
andconnectitthroughthepowerplug.
When connecting the cables, ensure that the
connector areas will not be subject to any
load.
Grounding
Beforeusingtheunit,check that the grounding
wirehasbeenfastenedsecurely.
Radio signal interference
If the unit is positioned near a TV or radio
transmitting antenna or a strong electrical or
magneticfield,itsimagesmaybedistortedand/
ortheimagesmaybeaffectedbynoise.
Doingsomaycausemalfunctioning.
Allowing the generated heat to escape
This unit allows the heat generated inside to
escapefromitssurfaces.
Donotinstall the unitina location whereitwill
be surrounded by walls or other surfaces and
whereheatwillbetrapped.Inaddition,theheat
isdissipatedtothebottompanelwhichwillwarm
upovertime:Thisisnormalandnotindicativeof
anytrouble.
Asystems does not assume any responsibility for accidents or damage resulting from
installation procedures not being followed.
8
MK20HD PLUS / MK20W
English
CEILING MOUNT INSTALLATION
Theproceduregivenhereisforthekindofinstallationwheretheunitissuspendedfromanoverhead
surface,butthesamestepsarefollowedforanuprightstand-aloneinstallation.
●Before proceeding to install and connect the main unit, connect the video output cable,
interfacecable,ACadaptorcableandcoaxialcablesinthespaceabovetheceilingpanel,
andthenpassthecablesthroughthecableholes.
●Forapoweroutletwhichisusedontheceiling,beabsolutelysuretotakemeasurestodeal
withthetrackingthatmaybecausedbytheaccumulationofdustandotherforeignmatter.
1. Mount the mount bracket (B) onto the installation surface.
●Dependingonthecondition,differentmountingscrewscanbeusedtosecurethecamerain
place.Consultatechnicianontheproperscrewstouse.
●Forproperclampingtorque,securelyattachthescrewsusingthespecifiedtools.
●Donotuseanyotherscrewssuchaswoodscrews,nails,etc.
Iftheceilingpanelis not strong enough tobeartheunit’s weight, usethe
kindofmountbracketthatissupportedbyanchorboltsbetweentheconcrete
ceilingandceilingpanel.Theunitsupportstheceilingmountbracketwhich
isusedsolelyforcombinationcameras.Usethisbrackettoinstalltheunit.
Forinstallingtheceilingmountbracket,theceilingmustbedrilled.Itisalso
recommendedthatyouprovidean inspectionspaceoropeningfor access
purposes in the area near where the equipment is installed in order to
facilitateinstallationandthewiringconnectionswork.
9
MK20HD PLUS / MK20W
English
2. Mount the bracket (A) to the MK20HD Plus and MK20W camera.
●UsethebracketmountingM4screwssuppliedwiththeunittoattachthebracket(A)totheVESAmount
onthebaseofcamera.
3. Attach the drop prevention wire.
●UsetheM3droppreventionwirescrewstoattachthewireinthemiddleofthebrackets.
Mainunitmountingscrews(M4)x2(supplied)
(M4,bind-head)
Droppreventionwirescrews(M3)x2(supplied)
Screwdiameter Clampingtorque
M4 1.47N•m{15kgf•cm}
10
MK20HD PLUS / MK20W
English
4. Mount the unit.
●Thehooksonbracket(B)canbeinsertedtothecorrespondingholestobracket(A)toforma
hinge,onceinserted,turnthebracket(B)counterclockwisetolockitinplace.
5. Secure the mounting brackets in place.
●UsetheM3screwsontheexteriorofthebracketstosecuretheminplace.
Bracketmountingscrews(M3)x3(supplied)
11
MK20HD PLUS / MK20W
English
TRIPOD MOUNT INSTALLATION
Forsetupsthatrequirethecameratobemountedonatripod,pleaseusethefollowinginstructionsto
properlymountthecamera.
● Beforeproceedingtoinstallandconnectthemainunit,makesurethetripodlegsaresteadily
andfirmlysetwithoutwobbles.
● Make sure thetripod always maintains a90 degree vertical centerof gravity.A top-heavy
object such as this is prone to tilt over and cause irreversible damage to the instrument,
therefore,90degreeverticalistheoptimalangleforcameramounting.
● Whenattemptingtosetthetripodonunevengroundorslopes,carefullyadjustthetripodlegs
topreventthecamerafortiltingover.
1. Assemble the tripod mount onto the VESA mount on the bottom of the camera with
provided M4 screws.
2. Mount the camera onto the tripod.
●Depending on the type of tripods you may be using,
you may need to screw the tripod mounting plate on
the camera then use locking mechanism to secure the
cameraonthe tripodoryou canjustsimply mountthe
camerawiththeconnectingscrew.
12
MK20HD PLUS / MK20W
English
PRECAUTION FOR USE
●Handle carefully
Donotdroptheproduct,orsubjectittostrongshockorvibration
●Use the product in an ambient temperature of 32 °F to 122 °F (0 °C to 50 °C).
Avoidusingtheproductatacoldplacebelow32°F(0°C)oratahotplaceabove122°F(50°C).
Extremelytemperatureswilladverselyaffectthedelicatepartsoftheunit.Roomtemperatureof77°F
±5°(25°C±5°)isrecommendedoperationtemperature.
●Power off before connecting or disconnecting cables.
Besuretoswitchthepoweroffbeforepluggingorunpluggingthecables.
●Avoid humidity and dust.
Avoidusingtheproductatahumidordustyconditionbecausemuchhumidityanddustwillcause
damagetothepartsinsidetheunit.
●Maintenance
Cleantheproduct usingadry cloth.Toremovestubborn dirt,dipa clothintoa diluted solutionof
kitchendetergent,wringitoutwell,andwipetheproductgently.Afterwipingtheproductwithamoist
cloth,wipeitagainwithadrycloth.
Caution
●Avoidusingbenzene,paintthinnersandothervolatilefluids.
●Ifacleaningchemicalistobeused,carefullyreadthroughtheprecautionsforitsuse.
●Precaution to be observed during production
This product’s image switching and image effect functions can be used to produce images which
flickerrapidlyorimageswhichchangerapidly.
However,bearinmindwhenusingthesefunctionsinproductionthatthekindsofimagesproduced
mayhaveanadverseeffectontheviewer’sphysicalwell-being.
●Handling the optional boards
Beabsolutelysuretoturnoffthepoweroftheproductbeforeinstallingorremovinganyoftheoptional
boards.
Beware of sharp or pointy edges and metal parts of the boards when installing or removing the
optionalboards.
●When the product is to be discarded
When the product is to be discarded at the end of its service life, ask a specialized contractor to
disposeofitproperlyinordertoprotecttheenvironment.
●Concerning the consumable parts
Powersupplyunit:Thisisaconsumablepart.Asageneralrule,replaceitevery5yearsorso(when
theunithasbeenoperatedfor15hoursaday).
Theperiodwhentheconsumablepartsneedtobereplacedwilldifferdependingontheoperating
conditions.
Ask your local dealer for the replacement service.
13
MK20HD PLUS / MK20W
English
TALLY CONNECTIONS
Camera 3
Tally
Camera 2
Tally
Camera 1
Tally
Tally
Splitter
Camera 4
Tally
Camera 5
Tally
Camera 3, 4&5
Tally
MK20RC
HOW TO CONNECT THE UNIT
1. ConnectthevideooutputcableviaInterfaceorSDIcable.
2. ConnecttheCOMporttoyourcontrollerifthecameraistobecontrolledbyaPTZremotecontrol.
3. IfLANcontrolmodeistobeused,connectthePOEconnectortoyourhub/router.Ifconnectedvia
COMport,connectthePOEporttotheincludedPOEpoweradapter.
4. PoweronthecamerabyusingtheIRremoteoraPTZcameraremotecontroltobeginoperation.
Note:Thisunitdoesnothaveapowerswitch.Thepowerturnsonwhenitspowerplugisconnected
to a power outlet. When the power is turned on, the pan, tilt, zoom and focusing operations are
performed. Before proceeding with maintenance, be absolutely sure to disconnect the power plug
fromthepoweroutlet.
Interface
Interface 2 Interface 3 Interface 4
Interface Interface
14
MK20HD PLUS / MK20W
English
IP CAMERA MATRIX SETUP SOFTWARE
WhenusingtheMK20HDPlusandMK20WinLANmode,it’simportanttofirstsetupyourcamera
controllerandcamerasintheIPCameraMatrixSetupManager.Thiscanbedownloadedfromthe
Asystemswebsite(www.asystems-sys.com)ontheMK20RCPluspage.Adownloadlinkcanbefound
intheResourcestab.
Installation
Firstandforemost,thePOE/LANconnectoronyourMK20HDPlusorMK20Wneedstobeconnected
toyourLANhub.AfterdownloadingtheIPCameraMatrixSetupManagerSoftwarearchivefromthe
Asystemswebsite,simplyextractthefilestoyourdesiredfolder.Installationisnotrequiredbutthe
softwareshouldbecopiedintoadedicateddirectory.Thesoftwarecanbelaunchedbydouble-clicking
theIPCameraMatrix.exeapplicationfile.
Operation
Whenstartingthesoftware,userswillbeaskedtoenteranaccountnameandpassword.Thedefault
valuesfortheseare“admin”and“admin.”Onceloggedin,gototheUsersubmenutochangethe
accountnameand/orenteranewpassword.
Controller Setup
Whensettingupyoursystem,yourfirststepshouldbetoscanforcontrollers.
1. Clickthe“1”intheControllerscolumntoopenthe“Scan”menu.
2.Bydefault,theScanfunctionwillsearchtheIPRangefrom192.168.1.1to254,butifyourLANuses
adifferentahostbit(specificallythethirdnumberintheIPaddress),besuretochangeaccordingly.
3. Click“Scan”tobeginscanningyourlocalareanetwork(LAN).Scanningthenetworkmaytakea
momentbutwillidentifyanyMK20RCPluscontrollerswithinyourLAN.
4. SelectyourMK20RCPlustoassignittoController1inthesoftware.Upto3controllerscanbe
setupwithinthesoftwareatanytime.
5. Youcanthenmoveontocamerasorfollowthestepsabovetoassignupto2morecontrollers.
15
MK20HD PLUS / MK20W
English
Camera Setup
Bydefault,5camerafieldswillbedisplayedonscreenwithinthesoftware.Thiscanbeexpandedby
clickingthetriangletotheleftoftheCameracolumn.
1.LikewiththeController,clickanumberfieldunder“Cameras”toopentheScanmenu.
2.Onceyournetworkisscanned,allcurrentlyconnectedandcompatiblecameraswillbedisplayed.You
canselectacameratobeassignedtoyourselectedCameranumber.Onceacameraisassignedit
willturnred.Repeatwithadditionalcameras.
NOTE:Withinthesoftware,camerasarenumbered1through25.ThisisnotthecasefortheMK20RC
Plusasthecamerasareseparatedinto5banksof5cameras.Thatbeingthecase,youcanusethelittle
tablebelowtounderstandhowcamerasassignedinthesoftwareareassignedintheMK20RCPlus.
IP Camera Matrix Setup Software MK20RC Plus
Cameras1-5 Bank1
Cameras6-10 Bank2
Cameras11-15 Bank3
Cameras16-20 Bank4
Cameras21-25 Bank5
Allcamerasarethenassignedascameras1to5withintheirrespectivebanks.
Load and Send
There’sonemorestepthatneedstobedonebeforeyourAsystemsMK20HDPlusorMK20Wareready
tooperatewithyourcameras.AftertheControllersandCameras havebeenscannedandassigned
accordingly,clickthe“Send”buttontouploadyoursettingstothecameraandcontrollersthemselves.
Afterthisisfinished,theMK20RCPluswillbeabletolinktoanyoftheconnectedMK20HDPlusand
MK20Wcameras.TheIPCameraMatrixSetupManagersoftwareisnotnecessarybeyondthispoint,
unlessanyofthepresetassignmentsneedtobechanged.
Atthebottomofthescreen,youwillalsofind“LoadAll”and“SendAll”buttons.Thesewillessentially
uploadordownloadall controllerdataaccordingly.
Reset
Clickingthe“Reset”buttonontherightofthesoftwarewillclearthedata.
IMPORTANT: PressESConyourkeyboardtoclosetheScanWindow.
UsethisQRcodetoimmediatelyjumptotheMK20RC
PluswebpageontheAsystemswebsite,orusetheURL
below.The IP Camera Matrix Setup Software can be
found within the Resources tab.
http://www.asystems-sys.com/product/mk20rc-plus/
16
MK20HD PLUS / MK20W
English
DIP SWITCH SETTING
TheDIPSwitchonthebackoftheMK20HDPlusandMK20WallowuserstosetaremoteIRIDforthe
camera.DIP4and5areusedsettingtheIDoftheunitwhensettingtheIRIDofthecamera.
SettingunitIDisparticularlyusefulwhenmultipleMK20HDPlusorMK20Wsaredeployedinanarea,
andusercanswitchcontrolsamongmultiplecameraswithasingleIRremotethatcomesincluded
withtheMK20HDPlusandMK20W.
IR Remote ID Setting
Asmentionedprior,onlythefirsttwoleversareusedforsettingtheIRremoteID1to3.Ifthelevers
aredown,theyrepresent“off”;iftheleversareup,theyrepresent“on”.TheIDsettingmethodfollows
abinaryvaluesystem,pleaseusethereferencetablebelowforcorrectlysettingtheIRremoteID.
RemoteID# DIPSwitchSetting
Pin5 Pin4
1OFF OFF
2OFF ON
3ON OFF
IRRemoteID:2
DIP 4 & 5:
IR ID
Interface
This manual suits for next models
1
Table of contents
