A1 Touch AOD 320 User manual

All In One All In One
USER’S MANUAL
AOD 320 metal case monitor
Contents:
1. Monitor User’s Manual
1.0 Connection to the monitor
1.1 Installation
1.2 Features
1.3 Plug and play function
1.4 Safety Precaution
1.5 OSD (On-Screen-Menu
1.6 OSD Menu
1.7 Specifications
1.8 Contents of the retail package
1.9 Troubleshooting
1.10 Drawing
2. Touch options
2.1 Touchoptions related to monitor size
2.2 4-Wire resistive touchscreen
2.3 5-Wire resistive touchscreen
2.4 SAW touchscreen
2.5 CAP touchscreen
2.6 IR touchscreen
2.7Optical-Touch
3. Software
3.1 Touchkit
3.2 ELO
4. Mounting
4.1 Plain
4.2 Brackets
4.3 Panel mounting
4.4 Wall mounting

All In One All In One
1.0. Connection To the Monitor
• Connect the signal(VGA) cable to the VGA port of computer. Tighten the
two thumbscrews by turning clockwise.
• You can adjust the connection for your PC environment.
• Connect AC cord to the monitor..
• AOD320 is 32" Full HD LCD monitor and support up to 60Hz.
•You can adjust brightness, contrast, horizontal & vertical positions by OSD
menus and use auto adjust function for instant adjustment.
• High-qualified LCD Controller inside
• Compact space saving design and power saving mode
• 100% compatible with Windows PC environment without the installation of
driver CD or software program.
1.1. Installation
1.2. Features
1.3. Plug and Play Function
AOD320 can be installed and connected automatically to any computer systems without
driver CD or software programs. Monitor will recognize the optimized value of video
mode by DDC(Display Data Channel) method that makes the graphic card of computer
to communicate with the monitor.
AOD320 supports VESA DDC 1/2B.
1.4. Safety Precaution
We strongly recommend that you carefully read this User’s Manual before operating
your LCD monitor. FOLLOW INSTRUCTIONS in this manual.
Please read and comprehend all using directives before use this machine.
●Power
— Use the type of power indicated on the marking label.
●Adapter
— Only use an adapter designed of the LCD monitor.
●Plug
— Do not remove any of the prongs of the monitor's three-pronged power plug.
— Disconnect the power plug from the AC outlet if you will not use it for an indefinite
period of time.
●Power and extension cord
— Use the proper power cord with ground conductor
— Do not overload wall outlets or power cords. Ensure that the total of all units plugged
into the wall outlet does not exceed 7 amperes.
— Do not allow anything to rest on the power cord. Do not locate this product where
persons will walk on the cord.
●Care and maintenance
— Slots and openings in the cabinet are provided for ventilation. Do not block or cover
these openings.
— Do not push objects of any kind into cabinet slots or openings. The screen surface
is easily scratched.
— Do not use paper towels to clean the display. Avoid touching it with your fingers,
pens, or pencils.
— Turn off the AC adapter and the monitor over long periods when not in use.

All In One All In One
1.5. OSD (On-Screen-Menu)
menu select down up power
Button Function Status
POWER Power ON or OFF ON/OFF
LED Indicate working status Green : On Red : Stand-by
Orange : No signal
UP Launch OSD Menu or
Add Value Move to OSD Menu
DOWN Launch OSD Menu or
Down value Move to OSD Menu
SELECT Select OSD Menu
MENU On / Off OSD Menu
1.6. OSD Menu
OSD Menu Description Remarks
Brightness Adjust the brightness of the screen
Contrast Adjust the contrast of the screen
H.Position Adjust the horizontal position of the
screen's image
V.Position Adjust the vertical position of the
screen's image
Phase Adjust the focus of the screen's
image
Clock Adjust the horizontal size of the
screen's image
Auto Adjust Automatically adjust the Horizontal
position, Vertical position, Horizontal
size, and Phase Window's
background or characters should be
displayed on your Full screen prior
to proceed this function
Color
Temp User Reddish
Bluish
Control the temperature of the color
Red
Green
Blue
Auto Color Adjust the color balance of the
screen
Control the intensity of the color of
the screen’s image
(Usable when Color temperature is
USER mode.)
Only
usable
on
Analog
Mode
Color
Only
usable
on
Analog
Mode
Picture

All In One All In One
1.7. Specifications
Language English
French
German
Spanish
Italian
Korean
Japanese
Select one of the seven
language
OSD H.Posi. Select OSD MENU horizontal
position
OSD V.Posi. Select OSD MENU vertical
position
OSD Timer OSD MENU disappear from
over the screen after setting
time
Transparency Adjust the transparency of the
OSD menu
Language English
German
French
Spanish
Korean
Select one of the seven
language
Recall Initialize the current mode & setting value
Analog Analog signal(RGB)
Digital DVI digital signal
Audio Audio ON/OFF select
Volume Adjust volume level
Input
Select
Misc.
Usable
on all
Mode.
OSD
Black pouwdered cover.
Model: 32 inch XGA TFT LCD Monitor
Type: 32" Color Active Matrix TFT LCD
Resolution (max): 1920 x 1080 (16:9) FULL HD
Color: 16,7 miljoen
Pixel: 0.170 x 0.510 mm
Brightness: 500 cd/m2
Contrast ratio: 1000:1
Viewing angle: 88°/88°&88°/88°
Respons time 18 ms
Active area: 697,6 (H) x 392,2 (V) mm
VGA input Analog RGB (D-Sub 15-pins)
Plug and play: Yes DDC1 /DDC2B
Power: 24 Volts. included adapter
Power consumption: <140 watt max.
Power consumption stand by: <10 watt max.
Temperature opration mode: 0 °C - 50 °C
Humidity operation mode: 10% ~ 85% R.H.
Size 785x475x88mm (wxhxd)
Weight 21 Kg
Mounting: VESA 200x100mm
Users Mode: OSD Key Menu / Select / Power / Down / Up
Compatibility: VESA / IBM / MAC
AOD320 VGA, 32 inch metal case monitor

All In One All In One
1.8. Contents Of the Retail Package
Monitor
User’s Manual AC/DC Adaptor Power Cord VGA Cable
Audio Cable
(Option) Touch Driver (Option) Composite
Cable (Option) S-video Cable
(Option)
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The monitor does not respond after you turn on the system.
Make sure that the monitor is turned on.
Turn off the power and check the monitor’s power cord, AC adapter,
and signal cable for proper connection.
Appear the “ No Input the Signal"
Check the connecting of the audio cable between the monitor and the computer.
Appear the “ Input Not the Supported"
Input signal are insuperable, reset the video mode.
The appearance is not at the screen center.
Use “AUTO ADJUST”, refer to the Controls section.
The characters on the screen are too dim or too bright
Choose fit color temperature, use “AUTO COLOUR ADJUST or manually adjust
“RGB ADJUSTMENT, refer to the Control section.


1.10. Drawings

All In One All In One
2 Touch Options
2.1Touch-options related to monitor size
Optical
3mm 6mm protected 3mm 6mm Touch
064OXXXXXXXX
070w O S S XXXXXX
104OOOOXOOS X
121OOOOXOOS X
150OOOOOOOOX
170OOOOOOOOX
190OOOOXOOS X
220W XXXXXXXXO
230XXXOXXXXX
320XXXOXXXOO
420XXXOXXXOO
O Aviable
X not aviable
S On demand
IR
SAW CAP
4Wire 5wire
2.2Option: 4-Wire-touchscreen
Interface
USB (standard) RS232 with PS/2
4 wire-touchscreen
sensor non glare is standard, glare is option
Chemical
resistance Acetone, ammonia-based glass cleaners, hexane, isopropyl alcohol, methylene chloride, mineral spirits, turpentine,
methyl ethyl ketone
Contact bounce less then 10ms
Activation force less then 40gr
Input modus Finger, glove hand,pen or stilus
Surface hardness Meets pencil hardness 3H (per ASTM D3363)
Position accuracy
(linearity) less then 1,5mm
Resolution 4096x4096 Based on controller resolution
Operating life 1 >3.000.000 (250gr, 2 activations/sec)
Operating life 2 >200.000 (250gr, 4.5mm/sec)
Light transmission 75~85% non glare (standard) and 90% glare (option) (per
ASTM D1003)
4 wire-controller USB is standard, RS232 with PS/2 of RS232 internal
powered is option
Power requirement +5V DC(±10%)
Power
consumption Operating 80mA ~ Max.current 140mA
Interface standard USB 'plug-and-play' compatible is standard
option RS232 with PS/2 connector is optie
option RS232 internal powered controller. is option
Electrostatic
protection prEN 61000-4-2, 1995: Meets level 4 (15kV lucht / 8kV contact discharges)
Touch resolution 4096x4096
Conversion time ~10 ms per coordinate set
Support operating
system Microsoft Windows: 95/98/ME/NT4.0/2000/XP/Vista Mac OS 9.X, 10.X, Mac Intel
Linux: Red Hat 9.0, Mandrake 10.0, SuSE 9.2, Fedora
CoreI &II &III, Yellow Dog 3.x, Kernel 2.4.X,
Kernel 2.6.X: 32 en 64 bits

All In One All In One
2.3Option: 5-Wire-touchscreen
2.4Option: SAW-touchscreen
5 wire-touchscreen non glare is standard, glare is option
Chemical resistance Acetone, ammonia-based glass cleaners, hexane,
isopropyl alcohol, methylene chloride, mineral spirits,
turpentine, methyl ethyl ketone
Vibration Withstand 0.01 inches amplitude, at a fraquency of 5
to 455 Hz, for a period of 15 minutes in each of the
three axes
Contact bounce less then 10ms
Electrostatic discharge
protection
withstands 20 discharges of 15kV (pr EN 61000-4-2,
1995)
Activation force less then 40gr
Input modus Finger, glove hand,pen or stilus
Surface hardness Meets pencil hardness 3H (per ASTM D3363)
Resolution 4096x4096 Based on controller resolution
Position accuracy
(linearity)
less then 1%
Operating life 1 >3.000.000 (250gr, 2 activations/sec)
Operating life 2 >200.000 (250gr, 4.5mm/sec)
Light transmission 75~85% non glare (standaard) en 90% glare (optie)
(per ASTM D1003)
5 wire-controller USB is standard, RS232 with PS/2 of RS232 internal
powered is option
Power requirement +5V DC(±10%)
Power consumption Operating 80mA ~ Max.current 140mA
Interface standard USB 'plug-and-play' compatible is standard
option RS232 with PS/2 connector is option
option RS232 internal powered controller. is option
Electrostatic
protection
prEN 61000-4-2, 1995: Meets level 4 (15kV lucht /
8kV contact discharges)
Touch resolution 4096x4096
Conversion time ~10ms per coordinate set
Support operating
system
Microsoft Windows: 95/98/ME/NT4.0/2000/XP/Vista
Mac OS 9.X, 10.X, Mac Intel
Linux: Red Hat 9.0, Mandrake 10.0, SuSE 9.2, Fedora
CoreI &II &III, Yellow Dog 3.x, Kernel 2.4.X,
Kernel 2.6.X: 32 en 64 bits
SAW-touchscreen standard 3mm glass with beveled edge
tempered option Break resistance, meets UL-1950, by
6mm heat tempered glass (is option)
protected option break resistance,dustproof, waterproof
(is option)
Chemical resistance Acetone, ammonia-based glass cleaners,
isopropyl alcohol, turpentine, methy
alcohol, methyl ethyl ketone, toluene,
gasoline, kerosine, vinegar
Electrostatic discharge protection pr EN 61000-4-2, 1995: meets level 4
(15 kV air /8kV contact discharges)
Activation force less then 85gr
Position accuracy Standard deviation of error is less then
±1%
Life performance >50.000.000 (finger)
Input modus Finger or glove hand (rubber, cloth,
leather)
Surface durability Optical glass surface, Mohs' hardness
rating : 7
Light transmission 90% (per ASTM D1003)
SAW-controller
Supply voltage +5V DC(±5%)
Supply current Min 85mA ~ Max 150mA
Electrostatic protection prEN 61000-4-2, 1995: Meets level 4
(15kV lucht / 8kV contact discharges)
Interface standard USB 'plug-and-play' compatible
option RS232 with PS/2 connector, is opton
option RS232 internal powered. is option
Touch resolution 4096x4096
Conversion time ~15ms per coordinate set
Reliability MTBF greater than 300.000 hours
Support operating system Microsoft Windows:
95/98/ME/NT4.0/2000/XP/Vista
Mac OS 9.X, 10.X, Mac Intel
Linux: Red Hat 9.0, Mandrake 10.0,
SuSE 9.2, Fedora CoreI &II &III, Yellow
Dog 3.x, Kernel 2.4.X,
Kernel 2.6.X: 32 en 64 bits

All In One All In One
2.6Option:IR touchscreen
2.5Option: CAP-touchscreen
2.7Option: Optical-Touch
Touch technology NextWindow optical imaging
Touch method Finger, gloved hand, stylus or any pointer
Touch activation force No pressure required
Glass Recommended tempered clear glass for maximum clarity
Luminous
transmission >92% for clear glass
Touch accuracy ± 2mm (for 40" screen) over 90% of the screen
USB reported touch resolution 32767x32767
Responding speed 10ms per coodinate set (max)
Typical 15ms (60 updates per second)
Power supply 1900 model is USB powered
Other models +12VDC, nominal(+11,5V to +12,5V) power adaptor
Calibration Simple four-point calibration. No drift
Interfaces USB: 1.1 (full speed), HID-compliant, plug-and-play compatible
Serial: RS232 DB9 straight through cable to PC. 4,800 Baud to 115,200
Baud
Operating systems Windows XP and Vista, Mac OS, Win 2000, Linux.
Software No software required for USB-works with Windows native HID mouse driver
NextWindow Serial Runtime software required for serial interface
NextWindow Touch+ software available for additional utilities
Warrenty 1 Year parts and labour
IR-touchscreen
Chemical resistance Acetone, ammonia-based glass cleaners, isopropyl
alcohol, turpentine, methy alcohol, methyl ethyl ketone,
toluene, gasoline, kerosine, vinegar
Touch activation force no minimum touch activation is required
Input modus ever bigger thanything 6,5 (W) x 6,5 (H)
Life performance ∞
Supply voltage +5V DC(±5%)
Supply current ~ 150mA
Interface standard RS232 baud rate: 9600, 8 data bits, 1 stop bit, no
parity, full duplex
Electrostatic prEN 61000-4-2, 1995: meets Level 4 (15kV air / 8kV
discharge protection contact discharges)
Touchpoint density Based on controller resolution, up to 4096x4096
Light transmission Over 90% (per ASTM1003)
Conversion time less msthan20
Support operating Microsoft Windows: 95/98/ME/NT4.0/2000/XP/Vista
system Linux: Red Hat 9.0, Mandrake 9.1
CAP-touchscreen standard 3mm glass, glare is standard, non glare is option
tempered version (option) Break resistance, meets UL-1950, by 6mm heat
tempered glass (is option)
Chemical resistance Water, ammonia, isopropyl-alcohol, and similar
non-abrasive cleaners
do not use chemical solvent,acidic or alkali
solutions
Input method Finger
Active force <10 gr
Response time Max. 200ms
Ball impact 13,0Ø steel bal 9 gr height=30 cm
Surface hardness Surface hardcoat cannot be scratched using any
stylus with Mohs rating ≤6
Linearity ±1,5%
Surface durability >160.000.000 touches without noticeable
degradation
Light transmission ≥85% (accordance with ASTM D1003)
Supply voltage 5V DC
Supply current Min 85mA ~ Max 150mA
Interface standard USB 'plug-and-play' compatible
option RS232 with PS/2 connector is option
option RS232 internal powered controller. is option
Touch resolution based on controller resolutionb 4096x4096
Support operating system Microsoft Windows:
95/98/ME/NT4.0/2000/XP/Vista
Macintosh OS9, OSX
Linux: Red Hat 9.0, Mandrake 10.0, SuSE 9.2,
Fedora CoreI &II &III, Yellow Dog 3.x,
Kernel2.4.2+, With GUI, Xfree86 4.3+, Kernel
2,3 and above, Command Line Only, Xfree86 3.3
and 4.2

All In One All In One
3 Software
3.1 Touchkit 3.2 ELO
By adding a jumper to the A-Touch controller, the whole system becomes
ELO-compatible.
The touch registration will be realised by ELO-drivers.
There are several reasons for doing this:
•You are already using application software with “build-in” ELO-
drivers.
•You are using clients with pre-installed ELO-drivers.
•You replace anoriginal ELO-touchscreen with an A1-touchscreen.
Then benefit is; you don’t have to install new software in the above
mentioned situation.
Remark:
If you want to change your driver software from touchkit to ELO, or the
other way around, you have to de-install the old software completely
before installing the new software.
Features for Touchkit software
Features
Calibration Fast full oriental 4 points position
Compensation Accuracy 25 points linearity compensation.
Draw Test Position and linearity verification
Extend Feature 1. Support monitor / display rotation
2. Support multiple monitor / display
3. Support QVGA and Half-VGA function
4. Support edge compensation
Controller Setting 1. Support multiple controllers
2. Dynamical add / remove controllers
3. Change Controller interface without reboot.
Language Support 10 languages for Windows
Mouse Emulator 1. Right / Left button emulation
2. Normal / Click on touch / Click on release mode
3. Auto right button
Sound Notification 1. Sound Option ( No Sound / Touch Down / Lift Up )
2. Frequency adjustment
3. Duration adjustment
Double Click 1. Configurable double click speed
2. Configurable double click area
OS support 1. Windows 95 / 98 / ME / NT4 / 2000 / XP / Vista
Windows XP Tablet PC Edition
2. Windows CE 2.12, 3.0, 5.0, 6.0 .NET
3. Linux ( X Window Version: 3, 4 Red Hat 6.0 ~ 9.0
Mandrake 5.0 ~ 9.1 , Kernel 2.4.X
Kernel 2.6.X,32 en 64 bits )
4. iMac. OSX, OS9.X, OS10.X, Intel
5. MS-DOS:
Support display resolution:
320x200, 640x200, 640x350, 640x480, 800x600,
1024x768 and 1280x1024
COM port support 1. Support COM 1 ~ COM 256 for Windows and
Linux
2. Support COM 1 ~ COM 8 for DOS