A1 Touch ATS 150 User manual

USER’S MANUAL
AOD/ATS 150 (15” 4:3) metal case monitor
Standard type,
` also available as:
A1Touch Solution BV  : [phone]
 : [phone]
Hogeweg 21
NL-6367 BA Voerendaal : [e-mail]
The Netherlands  :www.A1TouchSolution.nl
Black
panelmount RVS panelmount Hinges

Contents:
1. Monitor User’s Manual
1.0. Connection to the monitor
1.1. Installation
1.2. Features
1.3. Plug and play function
1.4. Safety Precaution
1.5. OSD (On-Screen-Menu)
1.6. OSD Menu
1.7. Specifications
1.8. Contents of the retail package
1.9. Troubleshooting
1.10. Drawing
2. Touch options
2.0. Touch options related to monitor size
2.1. 5-Wire resistive touchscreen
2.2. SAW touchscreen
2.3. CAP touchscreen
2.4. Projected capacitive
2.5. IR touchscreen
3. Software
3.0. Touchkit
3.1. ELO
4. Mounting
4.0. Overzicht
4.1. Plain
4.2. Brackets
4.3. Panel mounting
4.4. On-Wall mounting
4.5. In-Wall mounting
4.6. 19” Rack mount

1.Monitor User’s Manual
1.0 Connection To the Monitor
1.1 Installation
•Connect the signal (VGA or DVI) cable to the VGA or DVI/HDMI port of computer. Tighten the
two thumbscrews by turning clockwise.
•You can adjust the connection for your PC environment.
•Plug the DC cord of the AC adapter to the power connector and the plug
the end of AC adapter to and electrical outlet socket(110V/220V)
•Connect DC cord of adapter (12V DC) (option=24V) to the monitor..
1.2 Features
•AOD/ATS 150 is a WVGA (1024x768 pixels) LCD monitor.
•You can adjust brightness, contrast, horizontal & vertical positions by OSD
•menus and use auto adjust function for instant adjustment.
•High-qualified LCD Controller inside
•Compact space saving design and power saving mode
•100% compatible with Windows PC environment without the installation of
•driver CD or software program for touchscreen via our website www.a1touchsolution.nl
available.
1.3 Plug and Play Function
AOD/ATS 150 can be installed and connected automatically to any computer systems without
driver CD or software programs. Monitor will recognize the optimized value of video
mode by DDC(Display Data Channel) method that makes the graphic card of computer
to communicate with the monitor.
AOD150 supports VESA DDC 1/2B.
DVI – A/D
Power ( DC 12V )
VGA
Touch Interface Option: USB or Serial

1.4 Safety Precaution
We strongly recommend that you carefully read this User’s Manual before operating
your LCD monitor. FOLLOW INSTRUCTIONS in this manual.
Please read and comprehend all using directives before use this machine.
•Power
Use the type of power indicated on the marking label.
•Adapter
Only use an adapter designed of the LCD monitor.
•Plug
Do not remove any of the prongs of the monitor's three-pronged power plug.
Disconnect the power plug from the AC outlet if you will not use it for an indefinite period of time.
•Power and extension cord
Use the proper power cord with ground conductor
Do not overload wall outlets or power cords. Ensure that the total of all units plugged
into the wall outlet does not exceed 7 amperes.
Do not allow anything to rest on the power cord. Do not locate this product where persons will
walk on the cord.
•Care and maintenance
Slots and openings in the cabinet are provided for ventilation. Do not block or cover these
openings. Do not push objects of any kind into cabinet slots or openings. The screen surface is
easily scratched. Do not use paper towels to clean the display. Avoid touching it with your
fingers, pens, or pencils.
•Turn off the AC adapter and the monitor over long periods when not in use.
1.5 OSD (On-Screen-Menu)
menu select down up power
Button Function Status Hot Key
POWER Power ON or OFF
LED Indicate operation status
Green : Normal operation
Red : Off Mode
Amber : No valid input, Sleep mode
Green Blinking: No Signal
-
UP Select next menu item
Increase slider value Auto Configuration on no
menu status
DOWN Select previous menu item
Decrease slider value Auto Configuration on no
menu status
SELECT Select Highlighted function Input Source Change on
no menu status
MENU On /Off OSD Menu

1.6 OSD Menu
OSD STRUCTURE
ITEM
Sub Menu
Description
Value
Picture
Brightness
Adjust the backlight level of screen
50(0~100)
Contrast
Increase/ decrease picture contrast
50(0~100)
Sharpness
Control the clarity of details of pictures
2(0 ~ 4)
H Position
Adjust picture horizontal position
50(0~100)
RGB
ONLY
V Position
Adjust picture vertical position
50(0~100)
Clock
Adjust picture width
50(0~100)
Phase
Adjust picture focus quality
30(0~100)
Color
Color Status
Management
Select the color of picture mode User(User, Warm, Normal,
Cl)
Red
Adjust color of red rate
50(0~100)
RGB
ONLY
Green
Adjust color of green rate
50(0~100)
Blue
Adjust color of blue rate
50(0~100)
Auto Color
Auto color calibration
To Start
OSD
Language Select OSD menu language
English(English, Deutsh,
Francais, Italiano, Espanol,
H Position
Adjust the OSD horizontal position
50(0~100)
V Position
Adjust the OSD vertical position
50(0~100)
Transparency
Select the transparency of the OSD
33 (0~100)
OSD Time
Adjust the OSD menu timeout
10(3~30)
SETUP
Source
Select the input signal Source
RGB, DVI, AUTO
Factory reset
Reset to factory settings
To Start
Aspect
On/ Off the fit to screen
Off(On/Off)
Backlight DIM
On/ Off the backlight Dimming(PWM)
Off(On/Off)
Set ID
On/ Off the RS232 control
Off(On/Off)
Optional
Volume
Adjust the audio volume
62(0~100)
Optional
Mute
On/ Off the audio output
Off(On/Off)
Optional

Page 6
1.7 Specifications
Color panel:
Black powder Coated (other colors on request)
Model:
15 inch XGA TFT LCD Monitor
Type:
15" Color Active Matrix TFT LCD
(AUO G150XG03 V5)
Resolution (max):
1024 x 768 (XGA)
Color:
16,2 miljoen
Pixel:
0.297 x 0.297 mm
Brightness:
350 cd/m²
Contrast ratio:
700:1
Viewing angle:
85°/85° horizontal & 80°/80° vertikal
Respons time
8 ms
Active area:
304,1 (H) x 228,1 (V) mm
VGA input
Analog RGB (D-Sub 15-pins) + DVI
Plug and play:
Yes DDC1 /DDC2B
Power:
12 Volts. included Adapter
Power consumption:
<35 watt max.
Power consumption stand by:
<4 watt max.
Temperature opration mode:
0 °C - 50 °C
Humidity operation mode:
10% ~ 90% R.H.
Size
350x274x48mm (wxhxd)
Weight
3,3 Kg
Mounting:
VESA 75mm; (No bracket/ stand included in delivery;
See: mounting_brackets)
Users Mode:
OSD Key: Menu / Select / Power / Down / Up
Compatibility:
VESA / IBM / MAC
Options:
Standard delivery:
With PSU, EU power cable and 1.8 m DVI cable but without vesa stand.
Other options than below on request.
Functionality:
With or without touch
- without touch:
Acrylic or glass
-
with touch:
Type of Touch:
5 wire resitive, Surface Accoustic Wave or Projected Capacitive
Not sure what to use?
Call us at [phone] or send
us contactform
-
5 wire resistive :
-Standard non-glare.
-
Touchable with finger, glove and stylus.
-
Single touch
-activation force less than 40 gramm.
-
SAW:
-Standard glare.
-
Touchable with finger and glove.
-
Single touch
-activation force less than 85 gramm.
-
Projected Capacitive:
-Standard glare.
-
Touchable with finger, glove and pcap stylus.
-
10 points touch
-activation force less than 1 gramm.
External protection:
Standard IP44 or IP65 or higher (not for SAW)
Touch controller interface:
USB, RS232 with external power or RS232 with internal power
Video input:
VGA+DVI or VGA+DVI+AV.
Specifications / Manual
:
Dimensions :
Driver downloads :

Page 7
1.8 Contents of the Retail Package
Monitor
AC/DC Adapter (not 24V) Power cord VGA Cable (option) DVI Cable
Touch Driver (option)
1.9 Troubleshooting
TO REDUCE THE RISK OF ELECTRIC SHOK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONELLE.
•The monitor does not respond after you turn on the system.
•Make sure that the monitor is turned on.
•Turn off the power and check the monitor’s power cord, AC adapter,
•and signal cable for proper connection.
•Appear the “ No Input the Signal"
•Check the connecting of the audio cable between the monitor and the computer.
•Appear the “ Input Not the Supported"
•Input signal are insuperable, reset the video mode.
•The appearance is not at the screen center.
•Use “AUTO ADJUST”, refer to the Controls section.
•The characters on the screen are too dim or too bright
•Choose fit color temperature, use “AUTO COLOUR ADJUST or manually adjust
•“RGB ADJUSTMENT, refer to the Control section.

Page 8
1.10 Drawing

Page 9
2.Touch Options
2.0 Touch-options related to monitor size
Resistive
SAW
CAP
PROJ.
CAP
IR
Optical
Touch
4Wire
5Wire
Dual
Touch
3mm
6mm
protected
3mm
6mm
185”
X
O
X
S
S
X
S
S
O
S
X
OAviable XNot aviable S On demand
2.1 Option: 5-Wire-touchscreen
5 wire-touchscreen
non glare is standard, glare is option
Chemical resistance
Acetone, ammonia-based glass cleaners, hexane, isopropyl
alcohol, methylene chloride, mineral spirits, turpentine, methyl ethyl
ketone
Vibration
Withstand 0.01 inches amplitude, at a fraquency of 5 to 455 Hz, for
a period of 15 minutes in each of the three axes
Contact bounce
less then 10ms
Electrostatic discharge protection
withstands 20 discharges of 15kV (pr EN 61000-4-2, 1995)
Activation force
less then 40gr
Input modus
Finger, glove hand,pen or stilus
Surface hardness
Meets pencil hardness 3H (per ASTM D3363)
Resolution
4096x4096 Based on controller resolution
Position accuracy (linearity)
less then 1%
Operating life 1
>3.000.000 (250gr, 2 activations/sec)
Operating life 2
>200.000 (250gr, 4.5mm/sec)
Light transmission
75~85% non glare (standaard) en 90% glare (optie) (per ASTM
D1003)
5 wire-controller
USB is standard, RS232 with PS/2 of RS232 internal powered is
option
Power requirement
+5V DC(±10%)
Power consumption
Operating 80mA ~ Max.current 140mA
Interface standard
USB 'plug-and-play' compatible is standard
option
RS232 with PS/2 connector is option
option
RS232 internal powered controller. is option
Electrostatic protection
prEN 61000-4-2, 1995: Meets level 4 (15kV lucht /
8kV contact discharges)
Touch resolution
4096x4096
Conversion time
~10ms per coordinate set
Support operating system
Microsoft Windows: 95/98/ME/NT4.0/2000/XP/Vista/7
Mac OS 9.X, 10.X, Mac Intel
Linux: Red Hat 9.0, Mandrake 10.0, SuSE 9.2, Fedora
CoreI &II &III, Yellow Dog 3.x, Kernel 2.4.X,
Kernel 2.6.X: 32 en 64 bits
2.2 Option: SAW-Touchscreen
SAW-touchscreen standard
3mm glass with beveled edge
tempered option
Break resistance, meets UL-1950, by
6mm heat tempered glass (is option)
protected option
break resistance, dustproof, waterproof (is option)
Chemical resistance
Acetone,ammoniabased isopropyl alcohol, turpentine, methy
cleaners alcohol, methyl ethyl ketone, toluene, gasoline, kerosine,

Page 10
vinegar.
Electrostatic discharge protection
pr EN 61000-4-2, 1995: meets level 4 (15 kV air /8kV contact
discharges)
Activation force
less then 85gr
Position accuracy
Standard deviation of error is less then ±1%
Life performance
>50.000.000 (finger)
Input modus
Finger or glove hand (rubber, cloth, leather)
Surface durability
Optical glass surface, Mohs' hardness rating : 7
Light transmission
90% (per ASTM D1003)
SAW-controller
Supply voltage +5V DC(±5%)
Supply current
Min 85mA ~ Max 150mA
Electrostatic protection
prEN 61000-4-2, 1995: Meets level 4 (15kV lucht / 8kV contact
discharges)
Interface -standard
USB 'plug-and-play' compatible
-option
RS232 with PS/2 connector, is option
-option
RS232 internal powered. is option
Touch resolution
4096x4096
Conversion time
~15ms per coordinate set
Reliability
MTBF greater than 300.000 hours
Support operating system
Microsoft Windows:
95/98/ME/NT4.0/2000/XP/Vista/7
Mac OS 9.X, 10.X, Mac Intel
Linux: Red Hat 9.0, Mandrake 10.0,
SuSE 9.2, Fedora CoreI &II &III, Yellow
Dog 3.x, Kernel 2.4.X,
Kernel 2.6.X: 32 en 64 bits
2.3 Option: Surface Capacitive-touchscreen
CAP-touchscreen standard
3mm glass, glare is standard, non glare is option
tempered version (option)
Break resistance, meets UL-1950, by 6mm heat
tempered glass (is option)
Chemical resistance
Water, ammonia, isopropyl-alcohol, and similar
non-abrasive cleaners
do not use chemical solvent,acidic or alkali
solutions
Input method
Finger
Active force
<10 gr
Response time
Max. 200ms
Ball impact
13,0Ø steel bal 9 gr height=30 cm
Surface hardness
Surface hardcoat cannot be scratched using any
stylus with Mohs rating ≤6
Linearity
±1,5%
Surface durability
>160.000.000 touches without noticeable
degradation
Light transmission
≥85% (accordance with ASTM D1003)
Supply voltage
5V DC
Supply current
Min 85mA ~ Max 150mA
Interface standard
USB 'plug-and-play' compatible
option
RS232 with PS/2 connector is option
option
RS232 internal powered controller. is option
Touch resolution
based on controller resolutionb 4096x4096
Support operating system
Microsoft Windows:
95/98/ME/NT4.0/2000/XP/Vista
Macintosh OS9, OSX
Linux: Red Hat 9.0, Mandrake 10.0, SuSE 9.2,
Fedora CoreI &II &III, Yellow Dog 3.x,
Kernel2.4.2+, With GUI, Xfree86 4.3+, Kernel
2,3 and above, Command Line Only, Xfree86 3.3 and 4.2