A1 Touch AOD 215 User manual

Page 1
USER’S MANUAL
AOD/ATS 215 (21.5”) metal case monitor
Standard type,
also available as:
A1Touch Solution BV  : [phone]
 : [phone]
Hogeweg 21
NL-6367 BA Voerendaal : [e-mail]
The Netherlands  :www.A1TouchSolution.nl
Black panelmount RVS panelmount Hinges

Page 2
Contents:
1. Monitor User’s Manual
1.0. Connection to the monitor
1.1. Installation
1.2. Features
1.3. Plug and play function
1.4. Safety Precaution
1.5. OSD (On-Screen-Menu)
1.6. OSD Menu
1.7. Specifications
1.8. Contents of the retail package
1.9. Troubleshooting
1.10. Drawing
2. Touch options
2.0. Touch options related to monitor size
2.1. 5-Wire resistive touchscreen
2.2. SAW touchscreen
2.3. CAP touchscreen
2.4. Projected capacitive
2.5. IR touchscreen
3. Software
3.0. Touchkit
3.1. ELO
4. Mounting
4.0. Overzicht
4.1. Plain
4.2. Brackets
4.3. Panel mounting
4.4. Wall mounting

Page 3
1.Monitor User’s Manual
1.0 Connection To the Monitor
1.1 Installation
•Connect the signal(VGA) cable to the VGA port of computer. Tighten the
two thumbscrews by turning clockwise.
•You can adjust the connection for your PC environment.
•Plug the DC cord of the AC adapter to the power connector and the plug
the end of AC adapter to and electrical outlet socket(110V/220V)
•Connect DC cord of adapter (12V DC) to the monitor..
1.2 Features
•AOD/ATS 215 is a Full HD (1920x 1080 pixels) LCD monitor.
•You can adjust brightness, contrast, horizontal & vertical positions by OSD
•menus and use auto adjust function for instant adjustment.
•High-qualified LCD Controller inside
•Compact space saving design and power saving mode
•100% compatible with Windows PC environment without the installation of
•driver CD or software program.
1.3 Plug and Play Function
AOD/ATS 215 can be installed and connected automatically to any computer systems without
driver CD or software programs. Monitor will recognize the optimized value of video
mode by DDC(Display Data Channel) method that makes the graphic card of computer
to communicate with the monitor.
AOD215 supports VESA DDC 1/2B.
1.4 Safety Precaution
We strongly recommend that you carefully read this User’s Manual before operating
your LCD monitor. FOLLOW INSTRUCTIONS in this manual.
Please read and comprehend all using directives before use this machine.
•Power
Use the type of power indicated on the marking label.
•Adapter
Only use an adapter designed of the LCD monitor.
DVI – A/D
Power ( DC 12V )
VGA
Touch Interface Option: USB or Serial

Page 4
•Plug
Do not remove any of the prongs of the monitor's three-pronged power plug.
Disconnect the power plug from the AC outlet if you will not use it for an indefinite period of time.
•Power and extension cord
•Use the proper power cord with ground conductor
Do not overload wall outlets or power cords. Ensure that the total of all units plugged
into the wall outlet does not exceed 7 amperes.
Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on
the cord.
•Care and maintenance
Slots and openings in the cabinet are provided for ventilation. Do not block or cover these openings.
Do not push objects of any kind into cabinet slots or openings. The screen surface is easily
scratched. Do not use paper towels to clean the display. Avoid touching it with your fingers, pens, or
pencils.
•Turn off the AC adapter and the monitor over long periods when not in use.
1.5 OSD (On-Screen-Menu)
menu select down up power
Button Function Status
POWER Power ON or OFF ON/OFF
LED Indicate working status
Green: On
Red: Stand-by
Orange: No signal
UP Launch OSD Menu or
add value Move to OSD Menu
DOWN Launch OSD Menu or
add value Move to OSD Menu
SELECT Select OSD Menu
MENU On /Off OSD Menu

Page 5
1.6 OSD Menu
OSD Menu
Description
Remarks
Picture
Brightness Adjust the brightness of the screen
Contrast Adjust the contrast of the screen
H.Position
Adjust the horizontal position of the
screen’s image
Only
usable on
analog
mode
V.Position
Adjust the vertical position of the screen’s
image
Phase Adjust the focus of the screen’s image
Clock
Adjust the horizontal size of the screen’s
image
Auto adjust
Automatically adjust the horizontal position,
vertical position, horizontal size, and phase
window’s
Color
Color
temp
User
Reddish
Bluish
Control the temperature of the color
Red Control the intensity of the color of screen’s
image
(usable when color temperature is USER
mode.)
Only
usable on
analog
mode
Green
Blue
Auto color
Adjust the color balance of the screen
OSD
Language
English
French
German
Spanish
Italian
Korean
Japanese
Select one of the seven language
Usable in
all Mode.
OSD H. Posi. Select OSD MENU horizontal position
OSD V. Posi. Select OSD MENU vertical position
OSD Timer
OSD MENU disappear from over the screen
after setting time
Transparency Adjust the transparency of the OSD menu
Misc.
Language
English
French
German
Spanish
Korean
Select one of the five language
Usable in
all Mode.
Recall Initialize the current mode & setting value
Input
select
Analog Analog signal (RGB)
Digital DVI digital signal
Audio Audio ON/Off select
Volume Adjust volume level

Page 6
1.7 Specifications
AOD215W VGA+DVI, 21.5 inch metal case monitor with 5 wire non glare resistive touch
.
.
Black powdered cover.
.
Model:
M215HW03-V0 (AUO)
Type:
21.5 inch, 16:9 Color Active Matrix TFT LCD
Resolution (max):
1920 x 1080
Color:
16,7 million
Pixel:
0.248mm x 0.248mm X RGB
Brightness:
300 cd/m²
Contrast ratio:
1000:1
Viewing angle:
85°-85° (Hor) / 80°-80° (Vert)
Respons time
5 ms
Active area:
476.64 (H) x 268.11 (V) mm
VGA input
VGA + DVI
Plug and play:
Yes VESA DDC 1/2B
Power:
12 Volts, Adapter included
Power consumption:
29 watt stand, 40 watt max.
Power consumption stand by:
4 watt max.
Temperature opration mode:
0 °C - 50 °C
Humidity operation mode:
10% ~ 90% R.H.
Size
519x323x53mm (wxlxd)
Weight
~9 Kg
Mounting:
VESA 200x100mm
Users Mode:
OSD Key Menu / Select / Power / Down / Up
Compatibility:
VESA / IBM / MAC
1.8 Contents of the Retail Package
Monitor
AC/DC Adapter Power cord VGA Cable DVI Cable
Touch Driver (option)

Page 7
1.9 Troubleshooting
TO REDUCE THE RISK OF ELECTRIC SHOK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONELLE.
•The monitor does not respond after you turn on the system.
•Make sure that the monitor is turned on.
•Turn off the power and check the monitor’s power cord, AC adapter,
•and signal cable for proper connection.
•Appear the “ No Input the Signal"
•Check the connecting of the audio cable between the monitor and the computer.
•Appear the “ Input Not the Supported"
•Input signal are insuperable, reset the video mode.
•The appearance is not at the screen center.
•Use “AUTO ADJUST”, refer to the Controls section.
•The characters on the screen are too dim or too bright
•Choose fit color temperature, use “AUTO COLOUR ADJUST or manually adjust
•“RGB ADJUSTMENT, refer to the Control section.

Page 8
1.10 Drawing

Page 9
2.Touch Options
2.0 Touch-options related to monitor size
Resistive
SAW
CAP
PROJ.
CAP
IR
Optical
Touch
4Wire
5Wire
Dual
Touch
3mm
6mm
protected
3mm
6mm
215W
X
O
O
S
S
X
S
S
O
S
X
OAviable XNot aviable S On demand
2.1 Option: 5-Wire-touchscreen
5 wire-touchscreen
non glare is standard, glare is option
Chemical resistance
Acetone, ammonia-based glass cleaners, hexane, isopropyl
alcohol, methylene chloride, mineral spirits, turpentine, methyl ethyl
ketone
Vibration
Withstand 0.01 inches amplitude, at a fraquency of 5 to 455 Hz, for
a period of 15 minutes in each of the three axes
Contact bounce
less then 10ms
Electrostatic discharge protection
withstands 20 discharges of 15kV (pr EN 61000-4-2, 1995)
Activation force
less then 40gr
Input modus
Finger, glove hand,pen or stilus
Surface hardness
Meets pencil hardness 3H (per ASTM D3363)
Resolution
4096x4096 Based on controller resolution
Position accuracy (linearity)
less then 1%
Operating life 1
>3.000.000 (250gr, 2 activations/sec)
Operating life 2
>200.000 (250gr, 4.5mm/sec)
Light transmission
75~85% non glare (standaard) en 90% glare (optie) (per ASTM
D1003)
5 wire-controller
USB is standard, RS232 with PS/2 of RS232 internal powered is
option
Power requirement
+5V DC(±10%)
Power consumption
Operating 80mA ~ Max.current 140mA
Interface standard
USB 'plug-and-play' compatible is standard
option
RS232 with PS/2 connector is option
option
RS232 internal powered controller. is option
Electrostatic protection
prEN 61000-4-2, 1995: Meets level 4 (15kV lucht /
8kV contact discharges)
Touch resolution
4096x4096
Conversion time
~10ms per coordinate set
Support operating system
Microsoft Windows: 95/98/ME/NT4.0/2000/XP/Vista/7
Mac OS 9.X, 10.X, Mac Intel
Linux: Red Hat 9.0, Mandrake 10.0, SuSE 9.2, Fedora
CoreI &II &III, Yellow Dog 3.x, Kernel 2.4.X,
Kernel 2.6.X: 32 en 64 bits
2.2 Option: SAW-Touchscreen
SAW-touchscreen standard
3mm glass with beveled edge
tempered option
Break resistance, meets UL-1950, by
6mm heat tempered glass (is option)
protected option
break resistance, dustproof, waterproof (is option)
Chemical resistance
Acetone,ammoniabased isopropyl alcohol, turpentine, methy
cleaners alcohol, methyl ethyl ketone, toluene, gasoline, kerosine,
vinegar.

Page 10
Electrostatic discharge protection
pr EN 61000-4-2, 1995: meets level 4 (15 kV air /8kV contact
discharges)
Activation force
less then 85gr
Position accuracy
Standard deviation of error is less then ±1%
Life performance
>50.000.000 (finger)
Input modus
Finger or glove hand (rubber, cloth, leather)
Surface durability
Optical glass surface, Mohs' hardness rating : 7
Light transmission
90% (per ASTM D1003)
SAW-controller
Supply voltage
+5V DC(±5%)
Supply current
Min 85mA ~ Max 150mA
Electrostatic protection
prEN 61000-4-2, 1995: Meets level 4 (15kV lucht / 8kV contact
discharges)
Interface -standard
USB 'plug-and-play' compatible
-option
RS232 with PS/2 connector, is option
-option
RS232 internal powered. is option
Touch resolution
4096x4096
Conversion time
~15ms per coordinate set
Reliability
MTBF greater than 300.000 hours
Support operating system
Microsoft Windows:
95/98/ME/NT4.0/2000/XP/Vista/7
Mac OS 9.X, 10.X, Mac Intel
Linux: Red Hat 9.0, Mandrake 10.0,
SuSE 9.2, Fedora CoreI &II &III, Yellow
Dog 3.x, Kernel 2.4.X,
Kernel 2.6.X: 32 en 64 bits
2.3 Option: Surface Capacitive-touchscreen
CAP-touchscreen standard
3mm glass, glare is standard, non glare is option
tempered version (option)
Break resistance, meets UL-1950, by 6mm heat
tempered glass (is option)
Chemical resistance
Water, ammonia, isopropyl-alcohol, and similar
non-abrasive cleaners
do not use chemical solvent,acidic or alkali
solutions
Input method
Finger
Active force
<10 gr
Response time
Max. 200ms
Ball impact
13,0Ø steel bal 9 gr height=30 cm
Surface hardness
Surface hardcoat cannot be scratched using any
stylus with Mohs rating ≤6
Linearity
±1,5%
Surface durability
>160.000.000 touches without noticeable
degradation
Light transmission
≥85% (accordance with ASTM D1003)
Supply voltage
5V DC
Supply current
Min 85mA ~ Max 150mA
Interface standard
USB 'plug-and-play' compatible
option
RS232 with PS/2 connector is option
option
RS232 internal powered controller. is option
Touch resolution
based on controller resolutionb 4096x4096
Support operating system
Microsoft Windows:
95/98/ME/NT4.0/2000/XP/Vista
Macintosh OS9, OSX
Linux: Red Hat 9.0, Mandrake 10.0, SuSE 9.2,
Fedora CoreI &II &III, Yellow Dog 3.x,
Kernel2.4.2+, With GUI, Xfree86 4.3+, Kernel
2,3 and above, Command Line Only, Xfree86 3.3 and 4.2

Page 11
2.4 Option: Projected-capacitive-touchscreen
Projected capacitive sensor
Heat tempered glas, glare is standard, non glare is option
Glass
Tempered glass with ceramic black borders, C-grinded, r=2mm
Chemical resistance
Acetone, ammonia-based glass cleaners, hexane, isopropyl
alcohol, methylene chloride, mineral spirits, turpentine, methyl
ethyl ketone, gasoline, kerosene, vinegar.
Contact bounce
Around 5 ms for finger contact
Break resistance
Meets UL-1950 steel ball drop test
Activation force
No activation force needed
Input modus
Finger, glove hand (rubber, cloth, leather)
Surface hardness
Mohs’ hardness rating: 7
Resolution
2048x2048
Position accuracy (linearity)
less then 1%
Operating life
∞
Light transmission
90% ±2%
Projected capacitive controller
USB is standard, RS232 (option)
Power consumption controller
50mA typical,50mV peak to peak maximum ripple and noise
Interface
USB: 1,1 Full Speed ('plug-and-play' compatible is standard)
Operating Temperature
-25 to 80°C
Relative Humidity
95% at 60°C, RH Non-condensing
Resolution
2048x2048
Report rate
USB: Single touch Max. 200 points/sec
Dual touch Max.points/sec each
Response time
Max. 20ms
Support operating system
( eGAlax_eMPIA-controller)
Microsoft Windows: ME/2000,9x/XP/Vista/7
CE 2.12/3.0/.net/5.0/6.0 ; Embedded ; XP Tablet PC edition
Mac OS9, Mac OS X,(IBM, Intel CPU)
Linux: Red Hat (7.3/8.0/9.0), Mandrake (9.1/9.1/10) SuSE
(9.2,9.3,10,10.1) Fedora (Core I ,II ,III,IV,V,VI)
Yellow (Dog 3.x), Debian (Kernel 2.4.X/2.6.X), Ubuntu (5.1,6.06),
Mandriva (2005,2006)
Android 2.0 – Google , Moblin V2 - Intel
QNX: RTOS v6.3
2.5 OPTION: IR TOUCH
Chemical resistance
Acetone, ammonia-based glass cleaners, isopropyl
alcohol, turpentine, methy alcohol, methyl ethyl ketone,
toluene, gasoline, kerosine, vinegar
Touch activation force
no minimum touch activation is required
Input modus
everything bigger than 6,5 (W) x 6,5 (H)
Life performance
∞
Supply voltage
+5V DC(±5%)
Supply current
~ 150mA
Interface standard
RS232 baud rate: 9600, 8 data bits, 1 stop bit, no parity, full duplex
Electrostatic discharge protection
prEN 61000-4-2, 1995: meets Level 4 (15kV air / 8kV contact
discharges)
Touchpoint density
Based on controller resolution, up to 4096x4096
Light transmission
Over 90% (per ASTM1003)
Conversion time
less than20 ms
Support operating
system
Microsoft Windows: NT4.0/XP/Vista/7/2000/ME/98/95
Linux: Red Hat 9.0, Mandrake 9.1
Interface
USB (standard) RS232 with PS/2

Page 12
3.Touch Options
3.0 Touchkit
3.1 ELO
By adding a jumper to the A-Touch controller, the whole system becomes ELO-compatible.
The touch registration will be realised by ELO-drivers.
There are several reasons for doing this:
•You are already using application software with “build-in” ELO drivers.
•You are using clients with pre-installed ELO-drivers.
•You replace an original ELO-touch screen with an A1-touchscreen.
Then benefit is; you don’t have to install new software in the above
mentioned situation.
Remark:
If you want to change your driver software from touchkit to ELO, or the other way around, you have to de-
install the old software completely before installing the new software.
Features for Touchkit software
Calibration
Fast full oriental 4 points position
Compensation
Accuracy 25 points linearity compensation.
Draw Test
Position and linearity verification
Extend Feature
1. Support monitor / display rotation
2. Support multiple monitor / display
3. Support QVGA and Half-VGA function
4. Support edge compensation
Controller Setting
1. Support multiple controllers
2. Dynamical add / remove controllers
3. Change Controller interface without reboot.
Language
Support 10 languages for Windows
Mouse Emulator
1. Right / Left button emulation
2. Normal / Click on touch / Click on release mode
3. Auto right button
Sound Notification
1. Sound Option ( No Sound / Touch Down / Lift Up )
2. Frequency adjustment
3. Duration adjustment
Double Click
1. Configurable double click speed
2. Configurable double click area
OS support
1. Windows 95 / 98 / ME / NT4 / 2000 / XP / Vista Windows XP
Tablet PC Edition
2. Windows CE 2.12, 3.0, 5.0, 6.0 .NET
3. Linux ( X Window Version: 3, 4 Red Hat 6.0 ~ 9.0 Mandrake
5.0 ~ 9.1 , Kernel 2.4.X Kernel 2.6.X, 32 en 64 bits )
4. iMac. OSX, OS9.X, OS10.X, Intel
5. MS-DOS: Support display resolution: 320x200, 640x200,
640x350, 640x480, 800x600, 1024x768 and 1280x1024
COM port support
1. Support COM 1 ~ COM 256 for Windows and Linux
2. Support COM 1 ~ COM 8 for DOS

Page 13
4.Mounting
4.0 overzicht
4.1. Plain
4.2. Brackets
4.3. Panel mounting
4.4. Wall mounting
4.1 Plain
Metal case monitor
4.2 Brackets
Metal case monitor + 2x brackets
4.3 Panel-mounting
Metal case monitor + bezel + 2x brackets

Page 14
4.4 Wall mounting
Metal case monitor + New Star TV Wallmount (FPMA-W115)