AC Infinity ARKTICA Series User manual

USER MANUALUSER MANUAL
ARKTICA SERIES
EQUIPMENT RACK CABINETS

3
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service.
If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com
and click contact for our contact information.
EMAIL
[e-mail]
WEB
www.acinfinity.com
LOCATION
Los Angeles, CA

4
PRODUCT
ARKTICA T6 Wall Mount
ARKTICA T9 Wall Mount
ARKTICA T12 Wall Mount
ARKTICA T12 With Casters
MODEL
AC-ARK6-TW
AC-ARK9-TW
AC-ARK12-TW
AC-ARK12-TC
UPC-A
819137020740
819137020757
819137020788
819137020771
MANUAL CODE AR1902X1

5
MANUAL INDEX
Manual Index .................................................................................
Key Features .................................................................................
Product Contents ...........................................................................
Assembly .......................................................................................
Mounting .......................................................................................
Powering ........................................................................................
Programming .................................................................................
Other AC Infinity Products .............................................................
Warranty ........................................................................................
Page 5
Page 6
Page 7
Page 8
Page 11
Page 13
Page 15
Page 20
Page 21

6
KEY FEATURES
SMART CONTROLLER
LCD display enables temp,
monitoring, automated
triggers, speed control, timer,
alarms, and energy mode.
RETRACTABLE HANDLES
Features three full-sized
handles that can retract when
not in use. Lockable and
includes keys.
LOCKABLE CASTERS
Optional casters can be
installed onto the rack to
allow it to roll on the floor.
Can also be locked.
PREMIUM MATERIALS
Feature smoked tempered
glass with anodized aluminum
high lights for a professional
appearance.
HEAVY-DUTY BUILD
Thick Cold-rolled steel
construction ensures the rack
protects mounted equipment
and can hold up to 200 lbs.
QUIET COOLING
The internal fan system
features a PWM-controlled
motor with dual-ball bearings
to quietly exhaust out heat.

7
PRODUCT CONTENTS
ARKTICA SERIES - EQUIPMENT RACK CABINETS
Included In Standing And Wall Mount Models
(Wall-mount screws for the brackets are not included. Thermal Probe may be pre-installed already
behind the thermal controller.)
POWER
ADAPTER
(x1)
THERMAL
PROBE
(x1)
10-32 MOUNT-
ING SCREWS
(x50)
MOUNTING
BAR
(x1)
LOCKABLE
WHEELS
(x4)
RACK
UNIT
(x1)
DOOR
KEYS
(x2)
WHEEL
SCREWS
(x16)

8
ASSEMBLY
STEP 1
For standing rack models attach the wheels to
the rack system by carefully laying down the
rack onto a piece of cardboard or carpet to
avoid any damage or scratches. Simply screw
on the wheels using the included hardware.
STEP 2
The rack includes three slots, one located
on the top and one in the back and another
directly underneath the rack that are removable.
Depending on your set up you may remove
these to connect cable and power connections.
Top View Back View

9
ASSEMBLY
STEP 4
It is recommended to remove the back door
or bottom slot if you are mounting your rack
against a wall. To remove the back door
unhinge the door, on the left side of the door
on the inside of the rack is a pin similar to
step three, pull the pin to open the back then
remove the hinge pin and remove the door.
STEP 3
Every door on the rack is removable, if needed
you can remove the doors by pushing down the
pin hinge on thats on the inside corner. Tilt the
door out so the top hinge is outside the hole,
and then pull up so the bottom hinge comes
off the rack. Remove doors to help during wall
installation to prevent any damage.

10
ASSEMBLY
STEP 5
Each door is lockable with the included key set.
Make sure the door is completley closed before
locking, keep keys in a secure location.
STEP 6
To open each door, push in the key hole area
that says PUSH. The door handle will extend
out, and can be rotated to the left to open the
door.