VidaBox VB MNT FFS2 User manual

Fixed VESA Floor Stand V2
INSTALLATION GUIDE
VB_MNT_FFS2
VESA 100x100 & 75x75 Compatible
Ideal for VidaMount VESA Tablet Enclosures

Installation Instructions
Fixed Floor Stand V2 : VESA Compatible
Top Tube
(with preinstalled
Connecting Collar)
Fixed VESA
Mounting
Plate
Rectangular
Base Plate
3mm Hex Wrench
(For Hex Screws &
Set Screws)
To USB
Power Supply
IMPORTANT: If we are using the
VESA mounted device with
a USB cable, run the USB
cable through the oor
stand's central column,
while the pieces are
still disassembled.
Trying to sh the
cable through
later will be far
more dicult!
If charging is desired, please prepare the extension cable and / or charging solution for the VESA tablet rst.
Installing the charging solution / extension cable will be easier to do now rather than later.
VESA : 75 x 75 (3" x 3") and 100 x 100 (4" x 4") compatible.
USB-C, Micro-USB,
30-Pin iOS, Lightning, or
other tablet charging cable
(Micro-USB Connector shown)
1 Install/Route USB Cable
Component Checklist:
Middle Tube
(with preinstalled
Connecting Collar)
Bottom Tube
(w. Kensington
Lock Slot)
?
Using this with a VidaMount Tablet Enclosure?
Before proceeding: Install your
tablet & charging cable into the enclosure
FIRST - as per the included instructions.
[Step 3-A]
(4) M5X8 Hex
Countersink Screws
FLOOR STAND SECTIONS
SCREWS & HARDWARE
[Step 3-D]
(4) M5X12 Hex
Countersink Screws
(4) M4X8 Phillips
Pan Head Screws
2 Install Rubber Feet
(6) Self-Adhesive
Rubber Feet
for Base Plate

M5X8 Hex
Countersunk
Screws
VESA Plate
Top Tube
(with preinstalled
connecting collar)
Middle Tube
(with preinstalled
connecting collar)
Bottom Tube
Rectangular
Base Plate
(4) M5X12 Hex
Countersunk Screws
[3-A]
Tighten with
3mm Hex Wrench
[3-B, 3-C] Tighten
COUNTER-
CLOCKWISE
with included
3mm Hex
Wrench
[3-D] Tighten
CLOCKWISE
with included
3mm Hex
Wrench
Using the (4) M4X8 Phillips Pan Head
Screws, mount the VESA compatible device
onto the oor stand as shown.
[3-B]
[3-C]
[3-A]
[3-D]
3 Assemble the Floor Stand
4 Mount the VESA Compatible Device

125 Newtown Rd, Ste 100
Plainview, NY 11803 USA
Toll-free US: (844) 4-KIOSKS
Worldwide: [phone]
Australia: [phone] VIDA
EU/UK: [phone] VIDA
5 Set VESA Device to Portrait or Landscape
Choosing between Portrait and Landscape mode, rotate the VESA mounted device to its ideal position.
6 Affix VESA Device to Prevent Rotation
To prevent unintended adjustment between Portrait vs Landscape mode:
- A. Locate the larger set screw hole behind the VESA mounted device.
- B. Using the included 3mm Hex wrench, turn it CLOCKWISE to TIGHTEN.
(Hint: To allow re-adjustment, turn it COUNTER-CLOCKWISE to LOOSEN)
We STRONGLY recommend setting the VESA device to
a fixed position by tightening the set screw.
Reason: Tightening this will prevent
potential damage to the USB cable
inside of the floor stand.
BCLOCKWISE
to TIGHTEN.
COUNTER-
CLOCKWISE
to LOOSEN.
A
Hint: The optimal position
is usually determined by
the app or software
being run on the device.
Some apps are optimized for
landscape, while other apps
are optimized for portrait mode.
?Which position is better for your setup?
LANDSCAPE or PORTRAIT?
LANDSCAPE
PORTRAIT
v221017