Ace Plus EX-G069A User manual

EX-G069A
1x6 HD/SD-SDI Distribution Amplifier
User Manual
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: [phone]
FAX: [phone]
Website: www.ace-plus.com
Page 1 of 7

Safety and Notice
The EX-G069A 1x6 HD/SD-SDI Distribution Amplifier has been tested for conformance to
safety regulations and requirements, and has been certified for international use. However, like all
electronic equipments, the EX-G069A should be used with care. Please read and follow the safety
instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
zFollow all instructions and warnings marked on this unit.
zDo not attempt to service this unit yourself, except where explained in this manual.
zProvide proper ventilation and air circulation and do not use near water.
zKeep away the objects that might damage the device and assure that the placement of this unit is
on a stable surface.
zUse only the power adapter, power cords and connection cables designed for this unit.
zDo not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: [phone]
FAX: [phone]
Website: www.ace-plus.com
Page 2of 7

Introduction
This EX-G069A receives one SDI input, perfectly duplicates it, and re-transmits six SDI outputs for
real time multi-viewing. It is a reliable video device splitting a SDI or HD-SDI video source to six
HD-SDI or SD-SDI displays at the same time.
Features
zHD/SD dual-rate distribution
zSix separately buffered outputs
zHD cable equalization (Beldon 1694A)
zDual color LED indication of input lock and rate
zPass all ancillary data
zProvides automatic input cable equalization up to 300m (1000ft)
zInter-locked power supply for better fixedness
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: [phone]
FAX: [phone]
Website: www.ace-plus.com
Page 3of 7

Specifications & Package Contents
Model Name EX-G062A EX-G062B EX-G069A EX-G069B
Technical
SDI standards SD-SDI & HD-SDI
Auto HD/SD-SDI detection Yes
Supported protocols SMPTE 259M, SMPTE 292M / HDTV (1.485Gbps and
1.485/1.001Gbps)
Video bandwidth [1.485Gpbs & 1.485/1.001Gbps]
Data rates 270 / 1483 / 1485 Mbps
Video support [HD] 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30
[SD] [email protected], PAL@50Hz
SDI signal type SMPTE-292M, SMPTE-259M
Output impedance 75Ω
Reclocking function No Yes No Yes
Cable equalization [HD-SDI] up to 150m (500ft) / [SD-SDI] up to 300m (1000ft)
Audio support Yes
RP-918 pathological
patterns Immune
PCB stack-up 4-layer board [impedance control — differential 100Ω; single 50Ω]
Input 1x BNC [SDI]
Output 4x BNC [SDI] 4x BNC [SDI] 6x BNC [SDI] 6x BNC [SDI]
BNC connector 75Ωinter-locked socket
Eye pattern characteristics
Amplitude: Within 800mV ±3%
(<10%)
Rise overshoot: Less than 2%
(<10%)
Fall overshoot: Less than 2%
(<10%)
Long time jitter: 0.195μ(<1.0μ)
Timing jitter: 0.195μ(<1.0μ)
Alignment jitter: 0.127μ(<0.2μ)
Mechanical
Housing Metal case
Model 145 x 80 x 25mm [5.7”x3.2”x1”]
Package 270 x 175 x 80mm [10.6“x6.9”x3.2”]
Dimensions
[L x W x H] Carton 450 x 370x 300mm [1‘5.7”x1’2.6”x11.8”]
Model 300g [10.6oz] 305g [10.8oz] 330g [11.6oz] 335g [11.8oz]
Weight Package 775g [1.7 lbs] 780g [1.7 lbs] 805g [1.8 lbs] 810g [1.8 lbs]
Fixedness Inter-locked power supply
Power supply 5V 4A DC
Power consumption 10 Watts [max]
Operation temperature 0~40°C [32~104°F]
Storage temperature -20~60°C [-4~140°F]
Relative humidity 20~90% RH [no condensation]
Package Contents 1x EX-G062A /EX-G062B / EX-G069A / EX-G069B
1x 5V power adapter
1x User Manual
The measurement results are from Tektronix WFM-7120 with SDI through 1m (3.3ft) long Belden 1694A.
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: [phone]
FAX: [phone]
Website: www.ace-plus.com
Page 4of 7

Panel Descriptions
Front Panel
6
1 3
2 4
5
1. HD/SD-SDI input
2. LED — reserved, no use.
3. HD/SD-SDI output 5
4. LED — power indicator
5. HD/SD-SDI output 6
6. 5V DC power jack
Rear Panel
7. HD/SD-SDI output 1
10
7 8 9
8. HD/SD-SDI output 2
9. HD/SD-SDI output 3
10. HD/SD-SDI output 4
Bottom Panel
These DIP switches are reserved for the EX-G062B or EX-G069Bthat has re-clocking
functionalities. No use for this model.
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: [phone]
FAX: [phone]
Website: www.ace-plus.com
Page 5 of 7

Hardware Installation
1. Connect a camera or other devices equipped with HD/SD-SDI outputs to EX-G069A HD/SD-SDI
input.
2. Connect devices equipped with HD/SD-SDI inputs (e.g. monitors or video processors) to
EX-G069A HD/SD-SDI outputs.
3. Plug power adapter cable into 5V DC power jack.
HD/SD SDI Display HD/SD SDI Display
HD/SD SDI Display
HD/SD SDI Camera
HD/SD SDI Display
HD/SD SDI Display
HD/SD SDI Display
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: [phone]
FAX: [phone]
Website: www.ace-plus.com
Page 6of 7

Limited Warranty
The SELLER warrants the EX-G069A 1x6 HD/SD-SDI Distribution Amplifier to be free from
defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an
authorized dealer. Should this product fail to be in good working order within 1 year warranty period,
The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to
accident, disaster, abuse or any unauthorized modifications including static discharge and power
surges.
Unit that fails under conditions other than those covered will be repaired at the current price of
parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of
reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or
assume the risk of loss or damage in transit. Under no circumstances will a unit be accepted without a
return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations,
any other implied warranty or fitness or merchantability for any particular purpose, all of which are
expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are
responsible for shipping charges to and from the SELLER. Cables are limited to a 30 day warranty and
cable must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate. However,
The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual.
The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages
resulting from any defect or omission in this manual, even if advised of the possibility of such damages.
Also, the technical information contained herein regarding the EX-G069A features and specifications is
subject to change without further notice.
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: [phone]
FAX: [phone]
Website: www.ace-plus.com
Page 7of 7