ACKERMANN 16-2031HD User manual

Page 1 / 10
User Manual
16-2031HD
1. Introduction
The Ackermann TFT monitors are state of the art high-tech flat panel TFT monitors,
incorporating high quality TFT-LC panels with maximum resolution of 1280x1024. It is
based on the newest technology with high brightness 4-lamp CCFL backlight units. The
monitors are made of steel and hardened glass providing excellent stability and strength.
The integrated hinge and high adjustment means you are able to manouvre the monitors
for optimal viewing angle and comfort.
Panel technology
• PVA (Patterned Vertical Alignment)
Connections
•
•
•
S-VHS (Y/C)
RGB
VI
eatures
•
•
•
•
•
•
•
State of the art high performance picture quality design
Full CRT multi-sync monitor compatibility
Multi-sync capability up to SXGA resolution, 75Hz max., compatible standard
OS, VGA, SVGA, XGA and SXGA VESA timing
Expand OS, VGA, SVGA and XGA to full screen display
24 bit (16.7 million) true color data processing and display driving
Single control operated & transparent On-Screen- isplay (hereafter 'OS ')
User interface
•
•
•
•
•
•
Full control of all relevant display and interface parameters via OS
Multi language support
VESA C1/2B compliant
Compatible with VESA PMS power saving modes
+12V C single power: 45watts AC/ C power adapter
recommended (Supplied)
Operating temperature: 0 to 50°C

Page 2 / 10
2. Important Information
•
Please save the packaging. It has been designed to provide optimal support and protection for
the monitor during transportation.
3. Content of the Box
Accessories bag including:
PSU (45 Watt)
Powercord (Country specific)
Users manual
4. Unpacking, Placement and Setup
Note: To avoid condensation, please wait ½-1 hour, before operating the unit.
After the box has been opened, remove the accessories bag.
Bend the cardboard flaps outward and turn the box upside down, which will ensure the
inlay foam with the monitor is able to slide out. o not drop the content on the floor.
Remove the foam side pieces and the plastic bag.
The monitor needs to be placed on a smooth and stable surface. This surface must be
able to safely support 15 kg.
Make sure both the camera and monitor are turned off before connecting the monitor.
•
•
•
Connect the monitor to the camera by means of the supplied RGB, S-VHS or VI cable.
(Attached to the monitor)
Connect the PSU to the monitor and AC outlet
Turn on the camera and monitor
OS Panel is located be-
neath the monitor
•
•
•

Page 3 / 10
5. OSD Key unctions

Page 4 / 10
5.1 Quick-OSD-Menu
The keys have the following functions:
Following adjustments can be done via the Quick-OS -Menu:
Invoke via key <SET>

Page 5 / 10
Invoke via key <+>
5.2 OSD-Menu
Function(s) of the control keys:
Invoke via key <MEN>
Fig. 2 OS -Menu
The apperance of OS depends on selected signal-source. OS functionality by
showing RGB-signals and Video (S-VHS).

Page 6 / 10
5.2.1 Structure of the On Screen Display Menu (RGB)

Page 7 / 10

Page 8 / 10

Page 9 / 10
5.2.3 Structure of the On Screen Display Menu (Video)

Page 10 / 10
6. Optical Characteristics