Acqua GY-NE350RF/01 User manual

acqua
UPRIGHT REFRIGERATOR USER MANUAL
GY-NE350RF/01

3. Set temperature see note below

Remove the three screws at the
rear and the two screws at the
top of the Upright Fridge and
remove the lid.
Lay the Upright Fridge
backward. Remove the bottom
hinge bracket using an 8mm
socket or spanner.
Remove the pin and replace on
the opposite side using a 10mm
socket or spanner. Reattach
bottom bracket to the upright
Fridge. Replace leveling feet.
Stand upright and replace door.

Replace and secure the lid of the
Fridge with the two top screws
and the three rear screws from
step 1.
10

Storage in original food containers is advisable. Place already cooled foods into the refrigerator as
soon as possible, and be sure to:

Energy Saving tips
1. Do not place warm foods into the appliance. Allow warm foods to cool first. Do not install
the appliance near cookers, radiators or other sources of warmth. High ambient temperatures
cause longer, more frequent operation of the compressor
2. In order to make the cooling system work efficiently, please make sure the side plates and
back plate of the product are with some distance from the wall. It is strongly recommended
that the distance should be more than 50mm.
3. When the product works, please do not open the door too often or leave the door open any
longer than necessary.
4. Do not set temperature any colder than necessary.
5. The sketch map shows the right combination of the drawers, baskets and shelves which can
lead to the more energy efficiency. If users adjusted the combination, it would result the energy-
consuming.