ADLINK Technology IMT-BT User manual

Leading EDGE COMPUTING
Manual Rev.: 1.00
Revision Date: March 31, 2017
Part No: 50-1Z230-1000
IMT-BT
Medical Mobile Tablet
User’s Manual
(Android)

ii Revision History
Leading EDGE COMPUTING
Revision History
Revision Release Date Description of Change(s)
1.00 31/03/2017 Initial release

Preface iii
IMT-BT (Android)
Preface
Copyright 2017 ADLINK Technology Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global
environmental preservation through compliance with the Euro-
pean Union's Restriction of Hazardous Substances (RoHS) direc-
tive and Waste Electrical and Electronic Equipment (WEEE)
directive. Environmental protection is a top priority for ADLINK.
We have enforced measures to ensure that our products, manu-
facturing processes, components, and raw materials have as little
impact on the environment as possible. When products are at their
end of life, our customers are encouraged to dispose of them in
accordance with the product disposal and/or recovery programs
prescribed by their nation or company.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.

iv Preface
Leading EDGE COMPUTING
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.

Table of Contents v
IMT-BT (Android)
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Figures....................................................................... vii
List of Tables.......................................................................... ix
1 Introduction ........................................................................ 1
1.1 Overview.............................................................................. 1
1.2 Features............................................................................... 1
1.3 Specifications....................................................................... 2
1.4 Package Contents ............................................................... 4
1.5 Optional Accessories........................................................... 4
1.6 Product Layout..................................................................... 5
2 Getting Started ................................................................... 7
2.1 Using a microSD Card......................................................... 7
2.2 Installing a SIM Card (optional) ........................................... 8
2.3 Charging the Battery............................................................ 9
2.4 Initial Startup...................................................................... 10
3 Basic Skills ....................................................................... 13
3.1 Turn On / Wake Up............................................................ 13
3.2 Turn Off.............................................................................. 14
3.3 Navigating the Touchscreen.............................................. 14
3.4 Home Screen..................................................................... 15
3.5 Using Applications............................................................. 17
3.6 Navigation Bar................................................................... 17
3.7 Status Bar and Notifications Panel .................................... 18

vi Table of Contents
Leading EDGE COMPUTING
3.8 Entering Text...................................................................... 19
3.9 Function Buttons................................................................ 20
4 Wireless Connections ...................................................... 21
4.1 Airplane Mode.................................................................... 21
4.2 Wi-Fi................................................................................... 21
4.3 Bluetooth............................................................................ 22
4.4 GPS ................................................................................... 23
5 External Connections....................................................... 25
5.1 USB Host........................................................................... 25
5.2 HDMI Display Output......................................................... 25
5.3 Using an SD Card.............................................................. 26
5.4 Installing a SIM Card (optional).......................................... 27
5.5 Audio Out........................................................................... 27
6 Management...................................................................... 29
6.1 Wireless and Networks Settings........................................ 29
6.2 Device Settings.................................................................. 30
6.3 Personal Settings............................................................... 30
6.4 Accounts Settings.............................................................. 30
6.5 System Settings................................................................. 31
7 Care and Maintenance...................................................... 33
8 Additional Information...................................................... 35
8.1 Intended User Profile......................................................... 35
8.2 EMC Information................................................................ 38
Important Safety Instructions............................................... 43
Getting Service...................................................................... 45

List of Figures vii
IMT-BT (Android)
List of Figures
Figure 1-1: IMT-BT Layout.................................................................5

viii List of Figures
Leading EDGE COMPUTING
This page intentionally left blank.

List of Tables ix
IMT-BT (Android)
List of Tables
Table 1-1: IMT-BT (Android) Specifications......................................2
Table 2-1: SD card support list .........................................................8

xListofTables
Leading EDGE COMPUTING
This page intentionally left blank.

Introduction 1
IMT-BT (Android)
1 Introduction
1.1 Overview
The IMT-BT medical mobile tablet (Android) is designed for cus-
tomers in the retail and field service markets requiring a semi-rug-
ged mobile tablet running Android to act as a durable terminal with
high performance computing and versatile features. The IMT-BT
features a 1.5GHz dual-core TI OMAP5432 system-on-chip, NFC
and RFID reader functions, drop protection, IP54 water and dust
resistance and wide operating temperature range.
1.2 Features
XIntel® Celeron® Processor N2807 dual-core processor sys-
tem-on-chip
XAndroid 4.4.2 operating system
X10.1” sunlight readable display, capacitive touchscreen
XWireless Connectivity:
ZWLAN: IEEE 802.11 a/b/g/n/ac
ZWPAN: Bluetooth 4.0
ZWWAN: 3.5G HSPA+, 4G LTE (optional)
XGPS, E-compass, G-sensor
XData Capture: HF 13.56MHz NFC RFID, SAM encryption
supported
XIP65 rating
X1.2m drop resistance (1.5m with optional protective rubber
housing)

2Introduction
Leading EDGE COMPUTING
1.3 Specifications
Physical • Dimensions: 291 x 198 x 23 mm (L x W x T)
• Weight: 1150g
Processor • Intel® Celeron® Processor N2807 (1M Cache, up to 2.16
GHz)
Memory &
Storage
• 4 GB DDR3 RAM
• 64 GB eMMC
Display • 10.1” sunlight readable display, 1280x800 resolution
• Projected capacitive touchscreen
• 600 nits brightness
• 2-point touch
• Corning Gorilla glass (7H hardness)
• HDMI port (Type A)
Buttons • 1x power button
• 4x function buttons
Expansion
Slots • 1x SIM slot • 1x microSD slot (SDHC up to 64GB, Class 2 to 10)
• 1x USB 3.0 (Type-A)
Wireless LAN IEEE 802.11 a/b/g/n/ac (combo Mini PCIe half-size card)
• WEP, WPA/WPA2, WAPI
• 802.11a: up to 54 Mbps; 802.11b: up to 11 Mbps; 802.11g:
up to 54 Mbps; 802.11n: up to 65 Mbps
• Distance: 50 meters indoors, 150 meters outdoors
Wireless PAN • Bluetooth 4.0 (combo Mini PCIe half-size card)
Wireless WAN 3.5G HSPA+, 4G LTE (Mini PCIe half-size card, optional)
• LTE: 150Mbps downlink, 50Mbps uplink
• WCDMA: HSDPA, HSUPA, HSPA+
• GSM/GPRS/EDGE: GSM, GPRS/EDGE Class 12
GPS • GPS Module: uBlox AMY-6M
• Accuracy: 20 Meters
• Hot start: 1 second
• Warm start: 40 seconds
RFID • HF Reader 13.56 MHz
• Tag support: ISO15693, ISO14443A/B, NFC 18000-3
• SAM card support
Table 1-1: IMT-BT (Android) Specifications

Introduction 3
IMT-BT (Android)
Built-in
Sensors • G sensor: 3-axis, 2g, at least 8-bits accuracy • E-Compass: 3-axis, at least 8-bits accuracy
• Gyroscope: 12-bits accuracy
• Illuminance sensor: 0 to 100,000 lux
Status LEDs • Power, Wi-Fi, Charging
Camera • Back: 5 megapixel color camera with flash, autofocus
• Top: 2 megapixel color camera
Audio • Speaker, 100dB 1kHz @10 cm, 8 ohms
• Stereo headphone jack (3.5mm)
• Bluetooth headset support
• Built-in microphone
Battery • Li-ion 6300 mAh, 7.4V
• Full charge time < 4 hrs
Power Adapter • Input: 100-240 V AC, 47-63 Hz
• Output: 12V DC, 2.5A max.
OS • Android 4.4.2
Environmental • Operating Temperature: 0°C to 40°C
• Charging Temperature: 0°C to 40°C
• Storage Temperature: -10°C to 50°C
• Humidity: 10% to 90% non-condensing
• Drop: 1.2 meters (1.5 m with optional protective housing)
• Ingress Rating: IP65
Certifications • CB, CE, FCC
• EN 60601-1
•RoHS
Table 1-1: IMT-BT (Android) Specifications

4Introduction
Leading EDGE COMPUTING
1.4 Package Contents
Please check that your package contains the items below. If you
discover damaged or missing items, please contact your vendor.
XIMT-BT medical mobile tablet (Android)
XAC power adapter x1
XHand Strap
1.5 Optional Accessories
XOffice Dock (P/N: 93-D0000-100E)
XVehicle Dock (P/N: 93-D0001-100E)
XProtective Rubber Housing (P/N: 58-80068-0000)
WARNING:
DO NOT install or apply power to equipment that is damaged
or if there is missing/incomplete equipment. Retain the ship-
ping carton and packing materials for inspection. Please con-
tact your ADLINK dealer/vendor immediately for assistance.
Obtain authorization from your dealer before returning any
product to ADLINK.

Introduction 5
IMT-BT (Android)
1.6 Product Layout
Figure 1-1: IMT-BT Layout
Audio Out
Function Buttons x4
Microphone
Power Button
Status LEDs
USB 3.0
SD
NFC RFID Reader HDMI
DC Input SIM
2MP Camera
5MP Camera (with flash)
Docking Interface
Built-in Speaker

6Introduction
Leading EDGE COMPUTING
This page intentionally left blank.

Getting Started 7
IMT-BT (Android)
2 Getting Started
2.1 Using a microSD Card
Inserting a microSD card
1. Locate the microSD slot on the right side of the tablet
and open the cover.
2. Insert the card into the slot with the contacts pointing into
the slot and the label facing the front of the tablet.
3. Close the cover.
Removing a microSD card
You can safely remove the microSD card when the tablet is
shut down. If you need to remove the card while the tablet is
on, unmount the card first to prevent corrupting or damaging
the card.
1. Unmount the card (if necessary) by touching on the
Home screen and opening Settings ÎStorage Î
SD Card ÎUnmount SD Card.
2. Open the cover and press the edge of the card to
release it, then pull the card out of the slot.
3. Close the cover.

8 Getting Started
Leading EDGE COMPUTING
SD card support list
Table 2-1: SD card support list
2.2 Installing a SIM Card (optional)
Inserting a SIM card
1. Locate the SIM slot on the right side of the tablet and
open the cover.
2. Insert the card into the slot with the chip side facing the
back of the tablet and the beveled corner pointing into
the slot.
3. Close the cover.
To remove a SIM card, gently press the edge of the card to
release it, then pull the card out of the slot.
Speed Class Manufacturer Model
Class 4
Transcend
TS8GUSDHC4
TS16GUSDHC4
TS32GUSDHC4
Kingstone
SDC4/8G
SDC4/16G
SDC4/32G
Class 10 Kingstone SDCX10/64G
UHS-1 Sandisk
SDSDQUA-008G
SDSDQUA-016G
SDSDQUA-032G
SDSDQUA-064G

Getting Started 9
IMT-BT (Android)
2.3 Charging the Battery
Be sure to fully charge the battery before using your device for the
first time.
1. Locate the DC input socket on the left side of the tablet
and open the cover.
2. Insert the DC jack end of the AC adapter into the socket
and the AC plug into the wall socket.
3. The power status LED glows red when charging. If
charging for the first time, do not disconnect your device
from AC power until the battery is fully charged, indi-
cated by the power status LED glowing green. This may
take up to 4 hours.
4. Close the cover when charging is completed.
NOTE:
NOTE:
A blinking power status LED indicates an abnormal charging
condition. Check that the AC adapter is properly inserted into
the DC input socket and that the device is not charging in high
temperature conditions, resulting in an overheated battery.

10 Getting Started
Leading EDGE COMPUTING
2.4 Initial Startup
After turning on your device for the first time, the onscreen display
will guide you through a setup process.
1. Make sure that the tablet is either connected to AC
power or the battery has been fully charged.
2. Press the power button. The tablet powers up and dis-
plays the initial screen.
CAUTION:
For optimum performance of your battery:
• Only use the AC adapter provided
• Do not charge the battery when the temperature is high (e.g.
in direct sunlight).
• Do not store the device in high temperature environments
• Only charge the battery when its temperature is between
0°C and 40°C
• If you are not using the device for an extended period of
time, be sure to fully charge the battery at least once every
two weeks. Over discharge of the battery can affect its
performance.