Adtec 5040 Manual

AD-WT-5040 Page 1 of 2
Technical Specification
AD-WT-5040
Tilt Wall Mount 5040
WARRANTY
10 years limited
• Provides for optimum viewing with tool-free
forwards and backwards tilt angle adjustment
• Designed for precise display positioning with
provision to adjust display alignment horizontally
on wall plate
• Designed for easy installation with supplied spirit
level and slotted mounting holes for alignment
• Suitable for installation on most types of wall
construction when paired with appropriate
hardware (wall mounting hardware not included)
• Supplied with display mounting hardware and
installation guide
FEATURES
Display weight range
Tilt adjustment range
VESA mounting
0 - 50kg (0 - 110lb)*
-10° to +5°
100 x 100 to 400 x 400
*Curved monitors, deep devices (such as all-in-one PCs), VESA
mounted accessories (such as mini PC brackets and mounts), and
offset VESA locations exert additional leverage that can exceed
the capacity of the mount even though the monitor weight may
be within the stated range. Please contact Atdec if you would like
further information.

-10° +5°
56mm (2.20”) distance from wall at 0°
150mm
(5.91”)
448mm
(17.64”)
415mm
(16.35”)
27mm
(1.06”)
75mm to 410mm
(2.95” to 16.14”)
55mm
(2.17”)
56mm
(2.20”)
70mm
(2.76”)
405mm
(15.94”)
425mm
(16.73”)
Ø8mm
(0.32”)
AD-WT-5040 Page 2 of 2
MOVEMENT
DIMENSIONS
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©20210720