Advantage EKI-5000 Series User manual

User Manual EKI-5000 Series
ProView Series Ethernet Switches
P/N: 2015-EKI-5000-01
Version: Edition 4 , 2015/06

i
Content
Chapter 1 Product Overview
1.1. Supported Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.3. Hardware Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.3.1 Front View..................................................................................8
1.3.2 Rear View ................................................................................24
1.3.3 Top View..................................................................................28
1.3.4 Bottom View.............................................................................31
1.4. Packing List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Chapter 2 Switch Installation
2.1. Installation Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
2.1.1 Connecting Hardware..............................................................35
2.2. Verifying Switch Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
2.3. Installing the Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2.3.1 DIN Rail Mounting....................................................................36
2.3.2 Wall-Mounting..........................................................................37
2.4. Installing and Removing SFP Modules . . . . . . . . . . . . . . . . . . . . . . . . 39
2.4.1 Installing SFP Modules............................................................40
2.4.2 Removing SFP Modules..........................................................41
2.5. Connecting the Switch to Ethernet Ports. . . . . . . . . . . . . . . . . . . . . . . 42
2.5.1 RJ45 Ethernet Cable Wiring ....................................................42
2.6. Power Supply Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
2.6.1 Overview..................................................................................43
2.6.2 Considerations.........................................................................43
2.6.3 Grounding the Device..............................................................44
2.6.4 Wiring a Relay Contact............................................................45
2.6.5 Wiring the Power Inputs...........................................................45
Chapter 3 Configuration Utility
3.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3.2. Enabling ProView Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3.3. Installing the Configuration Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

ii
3.4. Utility Menu Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
3.5. Menu Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
3.5.1 View Menu...............................................................................54
3.5.2 Management Menu..................................................................56
3.5.3 Help Menu ...............................................................................56
3.6. Tool Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
3.7. TreeView . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
3.8. Information Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
3.9. Status Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
3.10. Configuration Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Chapter 4 Managing Switch
4.1. Discovering Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
4.1.1 First Time Installation...............................................................59
4.1.2 Discovering Switches...............................................................61
4.1.3 Group Management.................................................................62
4.1.4 Configuring the System............................................................67
4.2. Modbus/TCP Mapping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
4.2.1 Modbus/TCP Mapping Table...................................................71

iii
Federal Communication Commission Interference
Statement
For further certification information, please go to www.advantech.com
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded cables
are used for external wiring. We recommend the use of shielded cables. This kind of cable is
available from Advantech. Please contact your local supplier for ordering information.
This product has passed the CE test for environmental specifications. Test conditions for
passing included the equipment being operated within an industrial enclosure. In order to
protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage,
we strongly recommend the use of CE-compliant industrial enclosure products.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Warnings for Class 1 Division 2
The following statements are required to appear for Class 1 Division 2 requirements
These devices are open-type devices that are to be installed in an enclosure with tool
removable cover/door that is suitable for the environment.
WARNING -This equipment is suitable for use in Class I, Division 2, Groups A, B, C, and D
or non-hazardous locations only.
WARNING - EXPLOSION HAZARD - Do not connect or disconnect equipment unless
power has been removed or the area is known to be non-hazardous."
WARNING - EXPLOSION HAZARD - Substitution of any components may impair suitability
for Class I, Division 2."
AVERTISSEMENT - Ce équipement est adapté à une utilisation en Classe I, Division 2,
Groupes A, B, C, et D ou non dangereux.
AVERTISSEMENT - RISQUE D'EXPLOSION - Ne pas brancher ou débrancher l'équipe-
ment que l'alimentation a été retiré ou la région est connue pour être non dangereux ".
AVERTISSEMENT - RISQUE D'EXPLOSION - Remplacement de tous les composants peut
nuire à la conformité de Classe I, Division 2."

iv
ATEX Information
ATEX Directive 94/9/EC (as amended relating to Group II, Category 3 locations)
Standard: EN 60079-0:2012+A11:2013; EN 60079-15:2010
Conditions of safe use:
The equipment shall only be used in an area of not more than pollution degree 2, as
defined in IEC 60664-1.
The equipment shall be installed in an enclosure that provides a degree of protection
not less than IP 54 in accordance with EN 60079-15 and accessible only by the use of a
tool.
Transient protection shall be provided that is set at a level not exceeding 140 % of the
peak rated voltage value at the supply terminals to the equipment.
Safety Instructions
Read these safety instructions carefully.
Keep this user manual for later reference.
Disconnect this equipment from any AC outlet before cleaning. Use damp cloth. Do not
use liquid or spray detergents for cleaning.
For plug-in equipment, the power outlet socket must be located near the equipment and
must be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or letting it fall
may cause danage.
The openings on the enclosure are fo air convection. Protect the equipment from over-
heating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source is correct before connecting the equipment
to the power outlet.
Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
All cautions and warning on the equipment should be noted.
If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient over voltage.
Never pour any liquid into an opening. This may cause fire or electrical shock.
Never open the equipment. For safety reasons, the equipment should be opened only
by qualified service personnel.
II 3G

v
If one of the following situations arises, get the equipment checked by service person-
nel:
The power cord or plug is damaged.
Liquid has peretrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to the
user manual
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
Instructions for installation in a pollution Degree 2 environment or equivalent statement.
PoE requirements:
This product was in-door used and not connected to outside plant, so user manual shall
have the description as below or equivalent: “The equipment is to be connected only to
PoE networks without routing to the outside plant.”
Do NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE
TEMPERATURE MAY GO BELOW -40°C(-40°F) OR ABOVE 75°C(167°F) THIS
COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CON-
TROLLED ENVIRONMENT.
Product Warranty (5 years)
Company Address:
ADVANTECH CO.,LTD. （研華股份有限公司）
1 ALY 20 LN 26 RUEIGUANG RD NEIHU DISTRICT TAIPEI 114 TAIWAN
Advantech warrants to you, the original purchaser, that each of its products will be free from
defects in materials and workmanship for five years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by per-
sons other than repair personnel authorized by Advantech, or which have been subject to
misuse, abuse, accident or improper installation. Advantech assumes no liability under the
terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of our
customers never need to use our repair service. If an Advantech product is defective, it will
be repaired or replaced at no charge during the warranty period. For out of-warranty repairs,
you will be billed according to the cost of replacement materials, service time and freight.
Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU speed,
Advantech products used, other hardware and software used, etc.) Note anything
abnormal and list any on screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product, and any
helpful information readily available.

vi
3. If your product is diagnosed as defective, obtain an RMA (return merchandize authori-
zation) number from your dealer. This allows us to process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement Order
Card and a photocopy proof of purchase date (such as your sales receipt) in a shippa-
ble container. A product returned without proof of the purchase date is not eligible for
warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid to your
dealer.
Conventions
Copyright
Copyright © 2015 Advantech Inc. All rights reserved. No part of this publication may be
reproduced, adapted, stored in a retrieval system, translated into any language, or transmit-
ted in any form or by any means without the written permission of the manufacturer.
Warning signs are used to identify immediate hazards for property damage, injury
or death.
CAUTION SIGNS ARE USED WARN AGAINST POTENTIAL HAZARDS OR TO CAUTION AGAINST
UNSAFE PRACTICES.
Note signs are used to provide additional information for the device or settings.

vii
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support where you can find the lat-
est information about the product.
2. Contract your distributor, sales representative, or Advantech's customer service center
for technical support if you need additional assistance. Please have the following infor-
mation ready before you call:
Product name and serial number
Description of your peripheral attachment
Description of your software (operating system, version, application software, etc.)
A complete description of the problem
The exact wording of any error messages
About This Manual
This user manual is intended to guide professional installers in installing and configuring the
ProView Series Ethernet Switches. It includes technical specifications, software utility intro-
duciton, as we as procedures for the use of the software utility to self-manage the devices.

Chapter 1
Product Overview

PRODUCT OVERVIEW
1
1.1. Supported Models
Standard Models:
Wide Temperature Models:
Table 1-1. Standard Models
EKI-5525S EKI-5525M EKI-5525S-ST
EKI-5525M-ST EKI-5524SS EKI-5524MM
EKI-5524SS-ST EKI-5524MM-ST EKI-5525
EKI-5725 EKI-5728 EKI-5729F
EKI-5725FP EKI-5528 EKI-5526
EKI-5726 EKI-5726F EKI-5629C
EKI-5626C EKI-5624P EKI-5729P
Table 1-2. Wide Temperature Models
EKI-5525SI EKI-5525MI EKI-5525SI-ST
EKI-5525MI-ST EKI-5524SSI EKI-5524MMI
EKI-5524SSI-ST EKI-5524MMI-ST EKI-5525I
EKI-5725I EKI-5728I EKI-5729FI
EKI-5725FPI EKI-5528I EKI-5526I
EKI-5726I EKI-5726FI EKI-5629CI
EKI-5626CI EKI-5624PI EKI-5729PI

PRODUCT OVERVIEW
2
1.2. Specifications
Table 1-3. Specifications
Specifications Description
Interface I/O Port EKI-5525S/EKI-5525SI: 4 x RJ45 + 1 x SC (single
mode)
EKI-5525M/EKI-5525MI: 4 x RJ45 + 1 x SC (multi
mode)
EKI-5525S-ST/EKI-5525SI-ST: 4 x RJ45 + 1 x ST
(single mode)
EKI-5525M-ST/EKI-5525MI-ST: 4 x RJ45 + 1 x ST
(multi mode)
EKI-5524SS/EKI-5524SSI: 4 x RJ45 + 2 x SC (single
mode)
EKI-5524MM/EKI-5524MMI: 4 x RJ45 + 2 x SC (multi
mode)
EKI-5524SS-ST/EKI-5524SSI-ST: 4 x RJ45 + 2 x ST
(single mode)
EKI-5524MM-ST/EKI-5524MMI-ST: 4 x RJ45 + 2 x
ST (multi mode)
EKI-5525/EKI-5525I: 5 x 10/100BaseT(X)
EKI-5725/EKI-5725I: 5 x 10/100/1000BaseT(X)
EKI-5728/EKI-5728I: 8 x 10/100/1000BaseT(X)
EKI-5729F/EKI-5729FI: 8 x 10/100/1000BaseT(X) +
2 x 100/1000Base-FX SFP
EKI-5725FP/EKI-5725FPI: 4 x 10/100/1000BaseT(X)
with PoE + 1 x 100/1000Base-FX SFP
EKI-5528/EKI-5528I: 8 x 10/100BaseT(X)
EKI-5526/EKI-5526I: 16 x 10/100BaseT(X)
EKI-5726/EKI-5726I: 16 x 10/100/1000BaseT(X)
EKI-5726F/EKI-5726FI: 16 x 10/100/1000BaseT(X) +
2 x 100/1000Base-FX SFP
EKI-5629C/EKI-5629CI: 8 x 10/100BaseT(X) + 2 x
10/100/1000Base-T(X) or 100/1000Base-FX SFP
EKI-5626C/EKI-5626CI: 16 x 10/100BaseT(X) + 2 x
10/100/1000Base-T(X) or 100/1000Base-FX SFP
EKI-5624P/EKI-5624PI: 4 x 10/100BaseT(X) with
PoE + 2 x 10/100/1000BaseT(X)
EKI-5729P/EKI-5729PI: 8 x 10/100/1000BaseT(X)
with PoE + 2 x 10/100/1000BaseT(X)
Power Connector 6-pin screw Terminal Block (including relay)

PRODUCT OVERVIEW
3
Physical Enclosure Metal Shell
Protection Class IP30
Installation DIN-Rail and Wall-Mount
Dimensions
(W x H x D) EKI-5525S/EKI-5525SI: 27mm x 120mm x 84mm
EKI-5525M/EKI-5525MI: 27mm x 120mm x 84mm
EKI-5525S-ST/EKI-5525SI-ST: 27mm x 120mm x
84mm
EKI-5525M-ST/EKI-5525MI-ST: 27mm x 120mm x
84mm
EKI-5524SS: 28.5mm x 120mm x 85.3mm
EKI-5524SSI: 28.5mm x 120mm x 85.3mm
EKI-5524MM/EKI-5524MMI: 28.5mm x 120mm x
85.3mm
EKI-5524SS-ST/EKI-5524SSI-ST: 28.5mm x 120mm
x 85.3mm
EKI-5524MM-ST/EKI-5524MMI-ST: 28.5mm x
120mm x 85.3mm
EKI-5525/EKI-5525I: 27mm x 120mm x 84mm
EKI-5725/EKI-5725I: 27mm x 120mm x 84mm
EKI-5728/EKI-5728I: 43mm x 120mm x 84mm
EKI-5729F/EKI-5729FI: 43mm x 120mm x 84mm
EKI-5725FP/EKI-5725FPI: 74mm x 152mm x 105mm
EKI-5528/EKI-5528I: 43mm x 120mm x 84mm
EKI-5526/EKI-5526I: 74mm x 120mm x 84mm
EKI-5726/EKI-5726I: 74mm x 120mm x 84mm
EKI-5726F/EKI-5726FI: 74mm x 120mm x 84mm
EKI-5629C/EKI-5629CI: 74mm x 120mm x 84mm
EKI-5626C/EKI-5626CI: 74mm x 120mm x 84mm
EKI-5624P/EKI-5624PI: 74mm x 152mm x 105mm
EKI-5729P/EKI-5729PI: 74mm x 152mm x 105mm
LED Display System LED PWR1, PWR2, P-Fail, Loop detection
PoE (only for EKI-5725FP/EKI-5725FPI)
Port LED Link / Speed / Activity
PoE (only for EKI-5725FP/EKI-5725FPI, EKI-5624P/
EKI-5624PI and EKI-5729P/EKI-5729PI)
Table 1-3. Specifications (Continued)
Specifications Description

PRODUCT OVERVIEW
4
Environment Operating Tem-
perature Wide Temperature: -40°C ~ 75°C (-40°F ~ 167°F)
Standard Temperature:
Non PoE Models: -10°C ~ 60°C (14°F ~ 140°F)
PoE Models: -25°C ~ 60°C(-4°F ~ 140°F)
Storage Tempera-
ture -40°C ~ 85° C (-40°F ~ 185° F)
Ambient Relative
Humidity 10 ~ 95% (non-condensing)
Switch Properties MAC Address EKI-5525S/EKI-5525SI: 2K entries
EKI-5525M/EKI-5525MI: 2K entries
EKI-5525S-ST/EKI-5525SI-ST: 2K entries
EKI-5525M-ST/EKI-5525MI-ST: 2K entries
EKI-5524SS/EKI-5524SSI: 2K entries
EKI-5524MM/EKI-5524MMI: 2K entries
EKI-5524SS-ST/EKI-5524SSI-ST: 2K entries
EKI-5524MM-ST/EKI-5524MMI-ST: 2K entries
EKI-5525/EKI-5525I: 2K entries
EKI-5725/EKI-5725I: 2K entries
EKI-5728/EKI-5728I: 8K entries
EKI-5729F/EKI-5729FI: 8K entries
EKI-5725FP/EKI-5725FPI: 2K entries
EKI-5528/EKI-5528I: 8K entries
EKI-5526/EKI-5526I: 8K entries
EKI-5726/EKI-5726I: 8K entries
EKI-5726F/EKI-5726FI: 8K entries
EKI-5629C/EKI-5629CI: 8K entries
EKI-5626C/EKI-5626CI: 8K entries
EKI-5624P/EKI-5624PI: 2K entries
EKI-5729P/EKI-5729PI: 8K entries
Table 1-3. Specifications (Continued)
Specifications Description

PRODUCT OVERVIEW
5
Switch Properties Switching Band-
width EKI-5525S/EKI-5525SI: 1 Gbps
EKI-5525M/EKI-5525MI: 1 Gbps
EKI-5525S-ST/EKI-5525SI-ST: 1 Gbps
EKI-5525M-ST/EKI-5525MI-ST: 1 Gbps
EKI-5524SS/EKI-5524SSI: 1.2 Gbps
EKI-5524MM/EKI-5524MMI: 1.2 Gbps
EKI-5524SS-ST/EKI-5524SSI-ST: 1.2 Gbps
EKI-5524MM-ST/EKI-5524MMI-ST: 1.2 Gbps
EKI-5525/EKI-5525I: 1 Gbps
EKI-5725/EKI-5725I: 10 Gbps
EKI-5728/EKI-5728I: 16 Gbps
EKI-5729F/EKI-5729FI: 20 Gbps
EKI-5725FP/EKI-5725FPI: 10 Gbps
EKI-5528/EKI-5528I: 1.6 Gbps
EKI-5526/EKI-5526I: 3.2 Gbps
EKI-5726/EKI-5726I: 32 Gbps
EKI-5726F/EKI-5726FI: 36 Gbps
EKI-5629C/EKI-5629CI: 5.6 Gbps
EKI-5626C/EKI-5626CI: 7.2 Gbps
EKI-5624P/EKI-5624PI: 4.8Gbps
EKI-5729P/EKI-5729PI: 20Gbps
Table 1-3. Specifications (Continued)
Specifications Description

PRODUCT OVERVIEW
6
Power Power Consump-
tion EKI-5525S/EKI-5525SI: 2.8 watts
EKI-5525M/EKI-5525MI: 2.8 watts
EKI-5525S-ST/EKI-5525SI-ST: 2.8 watts
EKI-5525M-ST/EKI-5525MI-ST: 2.8 watts
EKI-5524SS/EKI-5524SSI: 4 watts
EKI-5524MM/EKI-5524MMI: 4 watts
EKI-5524SS-ST/EKI-5524SSI-ST: 4 watts
EKI-5524MM-ST/EKI-5524MMI-ST: 4 watts
EKI-5525/EKI-5525I: 2 watts
EKI-5725/EKI-5725I: 2 watts
EKI-5728/EKI-5728I: 5.2 watts
EKI-5729F/EKI-5729FI: 6.8 watts
EKI-5725FP/EKI-5725FPI: 89 watts
EKI-5528/EKI-5528I: 3.6 watts
EKI-5526/EKI-5526I: 3.84 watts
EKI-5726/EKI-5726I: 8 watts
EKI-5726F/EKI-5726FI: 9.6 watts
EKI-5629C/EKI-5629CI: 5.8 watts
EKI-5626C/EKI-5626CI: 8.2 watts
EKI-5624P/EKI-5624PI: 60 watts
EKI-5729P/EKI-5729PI: 65 watts
Power Input 12V ~ 48V (8.4V ~ 52.8V), redundant dual inputs
24V ~ 48V (16.8V ~ 62.4V): only for EKI-5725FP/
EKI-5725FPI
12V ~ 24V (9V ~ 36V): only for EKI-5624P/
EKI-5624PI and EKI-5729P/EKI-5729PI
Table 1-3. Specifications (Continued)
Specifications Description

PRODUCT OVERVIEW
7
Certifications Safety IEC/EN 60950-1, UL508
UL61010-1+UL61010-2-201 (Only for EKI-5729P/
EKI-5729PI, EKI-5624P/EKI-5624PI and
EKI-5725FP/EKI-5725FPI)
Class 1 Division 2, IECEx , ATEX
EMC CE, FCC
e-Mark (Only for EKI-5728/EKI-5728I, EKI-5729F,
EKI-5729FI)
EMI EN 55011/ 55022 Class A, EN 61000-6-4, FCC Part 15
Subpart B Class A
EMS EN 55024/ EN 61000-6-2
EN 61000-4-2 (ESD) Level 3
EN 61000-4-3 (RS) Level 3;
EN 61000-4-4 (EFT) Level 3
EN 61000-4-5 (Surge) Level 3;
EN 61000-4-6 (CS) Level 3
EN 61000-4-8 (Magnetic Field) Level 3
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Table 1-3. Specifications (Continued)
Specifications Description

PRODUCT OVERVIEW
8
1.3. Hardware Views
1.3.1 Front View
The following view applies to EKI-5525, EKI-5525I, EKI-5725 and EKI-5725I.
Figure 1-1. Front View
Table 1-4. Front View
No. Item Description
1 System LED panel See “System LED Panel” on page 22 for further details.
2ETH port EKI-5525/EKI-5525I: Four 10/100BaseT(X) ports.
EKI-5725/EKI-5725I: Four 10/100/1000BaseT(X) ports.
Port numbers in black are designated for port based Quality of Ser-
vice (QoS) functionality.
3 LNK/ACT LED Link activity LED.
3
4
5
P2
P1
P-Fail
Loop
1
2
EKI-5725
1
2
5
3
4

PRODUCT OVERVIEW
9
The following view applies to EKI-5528, EKI-5528I, EKI-5728 and EKI-5728I.
Figure 1-2. Front View
4Speed LED Gigabit Ethernet:
Green: 1000M
Amber: 100M
Off: 10M
Fast Ethernet:
Amber: 100M
Off: 10M
5 ETH port EKI-5525/EKI-5525I: One 10/100BaseT(X) port.
EKI-5725/EKI-5725I: One 10/100/1000BaseT(X) port.
Table 1-5. Front View
No. Item Description
1 System LED panel See “System LED Panel” on page 22 for further details.
Table 1-4. Front View (Continued)
No. Item Description
P2
P1
P-Fail
Loop
8
7
6
5
3
4
1
2
EKI-55285528I
1
2
3
4

PRODUCT OVERVIEW
10
The following view applies to EKI-5729F and EKI-5729FI.
Figure 1-3. Front View
2ETH port EKI-5528/EKI-5528I: Eight 10/100BaseT(X) ports.
EKI-5728/EKI-5728I: Eight 10/100/1000BaseT(X) ports.
Port numbers in black are designated for port based Quality of Ser-
vice (QoS) functionality.
3 LNK/ACT LED Link activity LED.
4Speed LED Gigabit Ethernet:
Green: 1000M
Amber: 100M
Off: 10M
Fast Ethernet:
Amber: 100M
Off: 10M
Table 1-6. Front View
No. Item Description
1 System LED panel See “System LED Panel” on page 22 for further details.
Table 1-5. Front View (Continued)
No. Item Description
P2
P1
P-Fail
Loop
8
7
6
5
3
4
109
1
2
EKI-5729F
1
2
5
3
4

PRODUCT OVERVIEW
11
The following view applies to EKI-5525S, EKI-5525SI, EKI-5525M and EKI-5525MI.
Figure 1-4. Front View
2ETH port Eight 10/100/1000BaseT(X) ports.
Port numbers in black are designated for port based Quality of Ser-
vice (QoS) functionality.
3 LNK/ACT LED Link activity LED.
4Speed LED Gigabit Ethernet:
Green: 1000M
Amber: 100M
Off: 10M
5 ETH port Two 100/1000Base-FX SFP ports.
Table 1-7. Front View
No. Item Description
1 System LED panel See “System LED Panel” on page 22 for further details.
2ETH port Four RJ45 ports.
Port numbers in black are designated for port based Quality of Ser-
vice (QoS) functionality.
Table 1-6. Front View (Continued)
No. Item Description
3
4
5
P2
P1
P-Fail
Loop
1
2
EKI-5
525SI
525SI
LNK/ACT
TX
RX
1
2
5
3
4