AEG ALM58SP24 User manual

ALM58SP24
Original instructions

2
2
x 1
x 2 x 1
x 1 x 1
x 1
x 1
I mportant!
It is essential that you read the instructions in this manual before
assembling, operating, and maintaining the product.
Subject to technical modifications.
ALM58SP24

33
x 1
x 2 x 1
x 1 x 1
x 1
x 1
ALM58SP24

4
4
START
BUTTON
HANDLE
ADJUSTMENT
PIN
SAFETY
KEY
SELF- PROPEL
TRIGGER
SPEED
CONTROL
SLIDER
BAR BLADE
MULCH
PLUG
HEIGHT
ADJUSTMENT
TRIGGER
BATTERY
PACK
BATTERY
PACK
RELEASE
ON/OFF BAIL BAR
UPPER
HANDLE
KNOB
GRASS
CATCHER
CUTTING
HEIGHT
INDICATOR

55
START
BUTTON
HANDLE
ADJUSTMENT
PIN
SAFETY
KEY
SELF- PROPEL
TRIGGER
SPEED
CONTROL
SLIDER
BAR BLADE
MULCH
PLUG
HEIGHT
ADJUSTMENT
TRIGGER
BATTERY
PACK
BATTERY
PACK
RELEASE
ON/OFF BAIL BAR
UPPER
HANDLE
KNOB
GRASS
CATCHER
CUTTING
HEIGHT
INDICATOR

6
6
20
22
10
15
14
START
INSTALLING AND REMOVING THE MULCH PLUG
REPLACING THE BLADE

77
20
22
10
15
14
START
UNFOLDING THE HANDLES
USING THE SELF-PROPEL FEATURE
OPERATING THE MOWER

8
8
18
24
12
16
13
ADJUSTING THE CUTTING HEIGHT
INSTALLING AND REMOVING THE BATTERIES
STORING THE PRODUCT

99
18
24
12
16
13
INSTALLING AND REMOVING THE SAFETY KEY
INSTALLING AND REMOVING THE GRASS CATCHER

10
10
1
2
3
4
UNFOLDING THE HANDLES

11 11
1
2
3
4
5
6
7

12
12
1
2
2
1
click
1
2
1
INSTALLING AND REMOVING THE BATTERY
PACKS
INSTALLING AND REMOVING THE SAFETY
KEY
NOTE: Every time the mower starts, it checks
capacity of the battery packs. During operation,
the mower draws power from the battery pack
that has the higher capacity.
NOTE: The mower can run on either 1 battery or
2 for extended runtime.
NOTE: The safety key must be installed to
operate the mower.

13 13
1
2
2
1
click
1
2
1
INSTALLING AND REMOVING THE SAFETY
KEY
NOTE: The safety key must be installed to
operate the mower.

14
14
STOP
START
2
START
STOP
OPERATING THE MOWER
USING THE SELF-PROPEL FEATURE

15 15
STOP
START
2
START
STOP
USING THE SELF-PROPEL FEATURE

16
16
1
2
INSTALLING AND REMOVING THE GRASS
CATCHER
NOTE: The mower does not start unless the grass
catcher is properly installed. The grass catcher/
mulch plug frame slot has 2 microswitches that
activate and allow the mower to start when the
grass catcher or mulch plug is installled.

17 17
1
2
2
1

18
18
1
2
NOTE: The mower height cutting range is
18-75mm.
ADJUSTING THE CUTTING HEIGHT

19 19
1
2
2
1

20
20
1
2
3
2
1
1. Pull the mulch plug handle to its maximum
length.
2. Insert the mulch plug assembly into the rear
discharge chute, ensuring that the metal frame
is properly aligned with its slot.
3. Push down on the mulch plug handle until the
metal frame is fully inserted into its slot.
NOTE: The mower does not start unless
the mulch plug is properly installed. The
grass catcher/mulch plug frame slot has 2
microswitches that activate and allow the
mower to start when the grass catcher or
mulch plug is installled.
INSTALLING AND REMOVING THE MULCH
PLUG