AEG MWTK76/9 User manual

MWTK76/9
30” Stailess Steel Microae Tri Kit
Compatible with
Panasonic NNSD986, NNSE996, NNSD997, NNSE992

Specifications are subject to change without notice
V1.0
MWTK76/9
30” Stailess Steel Microae Tri Kit
Side View Front View

Specifications are subject to change without notice
V1.0
Specifications (Column Installation)
30” Stailess Steel Microae Tri Kit
1. Being careful not to scratch the microwave door, and move it back about 2 inches.
2. Place the MWTK-76/9 into position. Use the 4 screws and screw them through the flanges into the side
gables.
3. Pull the microwave forward, and align the front of the microwave with the front of the MWTK-76/9.
4. To stop the microwave from sliding backwards whilst opening the door. It will be necessary to attach stops
behind the feet of the microwave
5. Air must be able to flow from the microwave upwards and into the room, or roof space. Failure to comply will
oid the aufacturer’s arraty on the microwave oven.
VOID CUT-OUT

Porter & Charles Appliances are designed and manufactured to the highest standards.
Each appliance is covered by a comprehensive 2-year parts and labour warranty.
Refer to product warranty policy for complete terms and conditions.
Porter & Charles appliances are imported and distributed in North America by
Euro-Line Appliances Inc. Formore information, please visit one of our showroomsor
www.euro-line-appliances.com /www.elawest.com
871 Cranberry Court
Oakville, ON L6L 6J7 Canada
905 829 3980
1 800 421 6332
2912 West 4th Avenue
Vancouver, BC V6K 1R2 Canada
604 235 3980
1 855 ELA WEST (352 9378)
[email protected]
[e-mail]
B742
FOR PARTS ANDSERVICE
Euro-Parts & Service
39822 Belgrave Road, Belgrave, ON. N0G 1E0
18006788352 (Canada) •18005614614 (U.S.)
www.euro-parts.ca •[e-mail] • [e-mail]