Aewin Technologies SCB-6980 User manual

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
1
Networking Appliance
Desktop Intel® Cedarview D2550/N2600 Network System, 6
Copper GbE, CF, SATA, PCI-E, Bypass
User’s Manual
Version 1.0a

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
2
© Copyright 2013. All Rights Reserved
Manual Edition 1.0a, Jul, 2013
This document contains proprietary information protected by copyright. All rights are reserved; no
part of this manual may be reproduced, copied, translated or transmitted in any form or by any means
without prior written permission of the manufacturer.
The content of this document is intended to be accurate and reliable; the original manufacturer assumes
no responsibility for any inaccuracies that may be contained in this manual. The original
manufacturer reserves the right to make improvements to the products described in this manual at any
time without prior notice.
Trademarks
IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International business Machine
Corporation
Award is a trademark ofAward Software International, Inc
Intel is a trademark of Intel
RTL is a trademark of Realtek
VIA is a trademark of VIATechnologies, Inc
Microsoft, Windows, Windows NT and MS-DOS are either trademarks or registered trademarks of
Microsoft Corporation
All other product names mentioned herein are used for identification purpose only and may be
trademarks and/or registered trademarks of their respective companies
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy of this document, the manufacturer
and distributor assume no liability resulting from errors or omissions in this document, or from the use
of the information contained herein.
For more information on SCB-6980 or otherAEWIN products, please visit our website
http://www.aewin.com.tw.
For technical supports or free catalog, please send your inquiry to
[email protected]

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
3
Table of Contents
Chapter 1. General Information ..........................................................................4
1.1 Introducing.........................................................................................................4
1.3 Order Information..............................................................................................6
1.4 Packaging...........................................................................................................6
1.5 Precautions.........................................................................................................7
1.6 System Layout ...................................................................................................8
1.7 Board Dimension...............................................................................................9
Chapter 2. Connector/Jumper Configuration..................................................10
2.1 Connector/Jumper Location and Definition.....................................................10
2.2 Connector and Jumper Setting.........................................................................12
2.3 CompactFlashTM Card Socket Pin Define........................................................22
Chapter 3. Utility & Driver Installation..............................................................23
3.1 Operation System Supporting..........................................................................23
3.2 System Driver Installation ...............................................................................24
3.3 LAN Driver Installation...................................................................................24
Appendix C: System Resources.............................................................................25
Appendix D: Cable Development Kit....................................................................28

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
4
Chapter 1. General Information
1.1 Introducing
The SCB-6980 is a desktop hardware platform designed for network service
applications. Built with Intel® Embedded IA components with warranty of
longevity, the SCB-6980 supports Intel® Atom™ D2550, N2600 low-voltage
processor with Intel® ICH10R I/O controller.
The platform supports high bandwidth DDR3 SODIMM slot with memory up to
4GB. In order to provide the best network performance and best utilization, the
powerful storage interfaces include one 2.5” SATA HDD and
CompactFlash™.SCB-6980 affords sixcopper GbE with bypass function on
front-panel. The front panel also has two USB 2.0 port, one RJ-45 console port
and LED indicators that monitor power and storage device activities for local
system management, maintenance and diagnostics. In addition, the SCB-6980
supports one mini-card socket and is RoHS, FCC and CE compliant.

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
5
1.2 Specification
Processor System CPU Intel® Cedarview-D D2550, N2600 Processors
Chipset Intel® ICH10R
BIOS AMIBIOS
Memory Technology Un-buffered and Non-ECC DDR3 800/1066MHz
memory
Capacity Up to 4GB with one SO-DIMM socket
Expansion Expansion Slots One mini-card slot (Support USB bus only via
mini-PCIe slot) (Option)
Ethernet GbE Ethernet Six RJ45 GbE ports, Intel® 82583V, PCI-E x1 (one
pair bypass between LAN1 and LAN2)
LAN bypass One ports bypass (Optional)
Storage SATA HDD One internal 2.5” SATA HDD bay
Compact Flash
Socket
One CompactFlashTM Type II
I/O USB Two external USB2.0
Serial One RJ45 Console port (COM1)
One internal 5x2 pin header (COM2)
Power Supply Watt 60W power supply, AC to DC 12V
Mechanical and
Environment
Form Factor Desktop
LED 1 x Power LED (Green)
1 x HDD LED (Red)
1 x Bypass LED (Yellow)
6 pairs LEDs for 6 Ethernet ports Active/Link
status (Green)
Dimension（W x D
x H）
232mm (W) x 153mm (D) x 44mm (H)
(9.1W x 6” D x 1.7” H)
Operating
Temperature
Operating: 0 ~ 40°C ( 32 ~ 104°F )
Storage
Temperature
-20 ~ 75°C (-4 ~ 167°F)
Humidity 10 ~ 85% relative humidity, non-operating,
non-condensing
Weight 1pc/Box, 4kgs, 14cm(W) x 38cm(D) x 23.2cm(H)
5Boxes/CTN, 20kgs, 40cm(W) x 72.4cm(D) x 26.4cm(H)
Certification CE/FCC

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
6
1.3 Order Information
We offer some accessories for SCB-6980 appliance for customer need.
SCB-6980A-D18 Desktop Intel® ATOM D2550 Network System, DDR3, 6 RJ45 GbE,
SATA, CF, Bypass
SCB-6980B-D18 Desktop Intel® ATOM D2550 Network System, DDR3, 4 RJ45 GbE,
SATA, CF, PCI-E
DK001 Cable development kit
46L-CO5204-00 Cross over cable
46L-EC5200-00 Ethernet cable
46L-RJDB91-00 RJ45 Console cable
46L-DB9200-01 Null modem cable
46L-IVGA01-00 VGA cable
46L-IPS200-00 KB/MS cable
46L-IUSB01-00 USB cable
1.4 Packaging
Please make sure that the following items have been included in the package
before installation.
1. SCB-6980 Appliance
2. Quick Installation Guide (Optional)
3. Cables (Optional)
4. CD-ROM that contains the following folders:
(1) Manual
(2) System Driver
(3) Ethernet Driver
(4) Utility Tools
If any item of above is missing or damaged, please contact your dealer or
retailer from whom you purchased the SCB-6980. Keep the box and carton
when you probably ship or store SCB-6980 in near future. After you unpack the
goods, inspect and make sure the packaging is intact. Do not plug the power
adapter to the appliance of SCB-6980 if you already find it appears damaged.
Note: Keep the SCB-6980 in the original packaging until you start installation.

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
7
1.5 Precautions
Please make sure you properly ground yourself before handling the SCB-6980
appliance or other system components. Electrostatic discharge can be easily
damage the SCB-6980 appliance.
Do not remove the anti-static packing until you are ready to install the
SCB-6980 appliance.
Ground yourself before removing any system component from it protective
anti-static packaging. To ground yourself, grasp the expansion slot covers or
other unpainted parts of the computer chassis.
Handle the SCB-6980 appliance by its edges and avoid touching the
components on it.

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
8
1.6 System Layout
SCB-6980 Front Side
SCB-6980 Rear Side
DDR3
SO-DIMM
CF card
2.5” SATA HDD Bay
CPU

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
9
1.7 Board Dimension

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
10
Chapter 2. Connector/Jumper Configuration
2.1 Connector/Jumper Location and Definition

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
11
SCB-6980 Connector and Jumper:
Connector Description Connector Description
CN1 KB/MS Connector CN25 Power JACK +12V Connector
CN2 SATA Connector CN26 Watchdog/Bypass selection
CN3 System FAN Connector PCIE1 PCI-E x1 Slot
CN4 COM2 Connector PW1 SATA Power Connector
CN5 SPI Connector JP1 PCI-E slot +5V voltage selection
CN6 USB 2X5 Header (2.54mm) JP2 PCI-E x1/x2 selection
CN7 Port 80 Connector JP3 Clear CMOS
CN8 VGA Connector JP6 GPI/Reset selection
CN9 Mini-PCIE Slot LED1 Power LED
CN10 CPU FAN Connector LED2 By Pass LED
CN11 WLAN LED Connector LED3 HDD LED
CN12 PCI-E x4 Slot LED4 LAN1 Active LED
CN13 Key Pad Connector LED5 LAN1 Link LED
CN14 LCM Connector LED6 LAN2 Active LED
CN15 LED Connector LED7 LAN2 Link LED
CN16 USB Connector LED8 LAN3 Active LED
CN17 2-Pin Power Connector LED9 LAN3 Link LED
CN18 LAN3 Connector LED10 LAN4 Active LED
CN19 LAN5 Connector LED11 LAN4 Link LED
CN20 LAN6 Connector LED12 LAN5 Active LED
CN21 LAN1 Connector LED13 LAN5 Link LED
CN22 LAN2 Connector LED14 LAN6 Active LED
CN23 LAN4 Connector LED15 LAN6 Link LED
CN24 Console Port (RJ45) LED16 Rear Side LED

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
12
2.2 Connector and Jumper Setting
CN1: PS/2 KB/MS Pin Header
Pin Define Pin Define
1 KCLK 2 MCLK
3 KDAT 4 MDAT
5 N/A 6 N/A
7 PS2_GND 8 PS2_GND
9 PS2_VCC 10 PS2_VCC
CN2: SATA Connector
Pin Signal
1 Ground
2 TXP
3 TXN
4 Ground
5 RXN
6 RXP
7 Ground
CN3: System FAN
Pin Define
1 Ground
2 +12V
3 Speed Detect
CN4: COM2 pin header

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
13
Pin Define Pin Define
1 DCD# 6 DSR#
2 RXD# 7 RTS#
3 TXD# 8 CTS#
4 DTR# 9 RI#2
5 Ground 10 NC
CN5:SPI Pin Header
Pin Define Pin Define
1 +3.3V 2 Ground
3 CS# 4 SCLK
5 MISO 6 MOSI
7 NONE 8 IO
CN6: USB Pin Header
Pin Define Pin Define
1 +5V 2 +5V
3 USB1N 4 USB2N-
5 USB1P 6 USB2P
7 Ground 8 Ground
9 N/A 10 Ground
CN7: Port 80 Connector

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
14
Pin Define Pin Define
1 +3.3V 2 LAD0
3 LAD1 4 LAD2
5 LAD3 6 LFRAME_N
7 PLTRST_N 8 +5V
9 PORT80_PCLK 10 N/A
11 GND 12 GND
CN8: VGA pin header
Pin Define Pin Define
1 RED 2 GREEN
3 BLUE 4 Reserved
5 GND 6 RED RTN
7 GREEN RTN 8 BLUE RTN
9 +5V 10 GND
11 Reserved 12 SDA
13 HSYNC 14 VSYNC
15 SCL 16 Reserved
CN10: CPU FAN

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
15
CN11: WLAN LED Connector
1
2
Pin Define Pin Define
1 LED1_WLAN# 2 +3.3V
CN12: PCIE x4 Slot (Option, only support PCI-E x1/x2)
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
A27
A28
A29
A30
A31
A32
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
B15
B16
B17
B18
B19
B20
B21
B22
B23
B24
B25
B26
B27
B28
B29
B30
B31
B32
PRSNT1#
+12V
+12V
GND
TCK
TDI
TDO
TMS
+3.3V
+3.3V
RST#
GND
CLK+
CLK-
GND
RP0
RN0
GND
RSVD
GND
RP1
RN1
GND
GND
RP2
RN2
GND
GND
RP3
RN3
GND
RSVD
+12V
+12V
+12V
GND
SMCLK
SMDAT
GND
+3.3V
TRST#
3.3Vaux
WAKE#
RSVD
GND
TP0
TN0
GND
PRSNT2-1#
GND
TP1
TN1
GND
GND
TP2
TN2
GND
GND
TP3
TN3
GND
RSVD
PRSNT2-2#
GND
Pin Define Pin Define
B1 +12V A1 GND
B2 +12V A2 +12V
B3 +12V A3 +12V
B4 GND A4 GND

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
16
B5 SMBCLK A5 +3.3V
B6 SMBDAT A6 +3.3V
B7 GND A7 TEST
B8 +3.3V A8 +3.3V
B9 NC A9 +3.3V
B10 +3.3V A10 +3.3V
B11 NC A11 PLTRST
B12 PWROK A12 GND
B13 GND A13 PCIECLKP
B14 TXP5 A14 PCIECLKN
B15 TXN5 A15 GND
B16 GND A16 RXP5
B17 SLOT_+5V A17 RXN5
B18 GND A18 GND
B19 TXP6 A19 SLOT_+5V
B20 TXN6 A20 GND
B21 GND A21 RXP6
B22 GND A22 RXN6
B23 NC A23 GND
B24 NC A24 GND
B25 GND A25 NC
B26 GND A26 NC
B27 NC A27 GND
B28 NC A28 GND
B29 GND A29 NC
B30 NC A30 NC
B31 PCIESEL A31 GND
B32 GND A32 NC
CN13: LCM KEYPAD Pin Header

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
17
1
2
3
4
5
Pin Define
1 ACK#
2 BUSY
3 PE
4 SLCT
5 Ground
CN14: LCM pin header
2
36
8
10
12
14
16
1
5
7
9
11
13
15
Pin Define Pin Define
1 +5V 2 GND
3 P_AFD# 4 NC
5 P_INIT# 6 P_SLIN#
7 LCM_PD1 8 LCM_PD0
9 LCM_PD3 10 LCM_PD2
11 LCM_PD5 12 LCM_PD4
13 LCM_PD7 14 LCM_PD6
15 LCM_BK_CTRL 16 BK_CTRLP
CN16: USB Connector
Pin Define Pin Define

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
18
1 +5V 2 DATA0-
3 DATA0+ 4 GND
5 +5V 6 DATA1-
7 DATA1+ 8 GND
CN17: DC +12V Power Jack (2Pin) (Option, Only for SCB-7902)
11
22
Pin Define Pin Define
1 +12V 2 GND
CN18/CN19/CN20/CN21/CN22/CN23: LAN RJ-45 Connector
Pin Define
1 TX+
2 TX-
3 RX+
4 Chassis Ground
5 Chassis Ground
6 RX-
7 Chassis Ground
8 Chassis Ground
D1: Speed indicated LED
1 Gbps GREEN
100 Mbps YELLOW
D2 :Link/Activity LED
Link GREEN
Activity BLINKING
CN25: DC +12V Power Jack (2Pin)

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
19
11
22
Pin Define Pin Define
1 +12V 2 GND
CN26: Watchdog/Bypass selection
Pin Status Pin Status
1-3 Watchdog mode(default) 2-4 By Pass Enable
3-5 By pass mode 4-6 By Pass Disable(default)
PCIE1: PCIEx1 SLOT
KEY
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18B18
B17
B16
B15
B14
B13
B12
B11
B10
B9
B8
B7
B6
B5
B4
B3
B2
B1 PRSNT1*(B)
12V(P)
12V(P)
GND(P)
JTAG2(B)
JTAG3(B)
JTAG4(B)
JTAG5(B)
3.3V(P)
3.3V(P)
PWRGD(I)
GND(P)
REFCLK+(I)
REFCLK-(I)
GND(P)
HSIP0(O)
HSIN0(O)
GND(P)GND(P)
PRSNT2*(B)
GND(P)
HSON0(I)
HSOP0(I)
GND(P)
RSVD(B)
WAKE*(B)
3.3VAUX(I)
JTAG1(B)
3.3V(P)
GND(P)
SMDAT(B)
SMCLK(B)
GND(P)
12V(P)
12V(P)
12V(P)
Pin Define Pin Define
B1 +12V A1 GND
B2 +12V A2 +12V
B3 +12V A3 +12V
B4 GND A4 GND

User’s Manual
AEWIN Technologies Co., Ltd Jan., 2013
20
B5 SMBCLK A5 TCK
B6 SMBDAT A6 TDI
B7 GND A7 NC
B8 +3.3V A8 TMS
B9 TRST# A9 +3.3V
B10 +3.3V A10 +3.3V
B11 NC A11 PLTRST
B12 PWROK A12 GND
B13 GND A13 SLOTCLKP
B14 SLOTTXP A14 SLOTCLKN
B15 SLOTTXN A15 GND
B16 GND A16 SLOTRXP
B17 NC A17 SLOTRXN
B18 GND A18 GND
PW1: HDD POWER
1
2
3
4
Pin Define
1 +12V
2 GND
3 GND
4 +5V