Toshiba G9 ETB006Z User manual

Instructions for Toshiba G9 ETB006Z option card
Terminal Assignment
ETB006Z G9
AC1 F
AC2 R
AC3 S1
AC4 S2
AC5 S3
AC6 RES
AC7 ST
Instructions:
1.- Disconnect the ST to CC jumper on the standard terminal strip.
2.- Connect the ETB006Z card to the ASD as follow.
3.- Set jumper J100 to Source position.
4. – Provide 120V to the terminals of the ETB006Z card by using N as a neutral.
5.- Remember to provide 120V to AC7 since correspond to ST.