Agam Pliko Manual

PHONE [phone] TOLL-FREE 1.800.645.0854
6695 Business Parkway, Elkridge Maryland 21075 USA
agam.com
SETUP INSTRUCTIONS

FRAME 1
1 2
FRAME 4
FRAME 2FRAME 3 (TOP)
(BOTTOM)
AC
B
D
AC
B
D
REMOVE FROM BOX LAY OUT FRAME
FRAME 1
PACKING
SPACER 2
PACKING
SPACER 3
PACKING
SPACER 1
FRAME 2
FRAME 3
FRAME 4

LOCK CORNER BRACES x4 REMOVE PLUNGERS x4
3 4
STEP ASTEP B
LOCKPUSH

CONNECT SPLINES x4 LED STRIP CONNECTION x2
5
STEP ASTEP BSTEP C
6
INSERT PUSH CLICK
STEP ASTEP B
INSERT CLICK

INSERT FABRIC (BACK)
STEP A
STEP A
STEP A
STEP A
STEP A: Insert the stitched silicone edge into the
channel on all four corners.
STEP B: Find the center of each side and work in a small
portion of the fabric. Do not insert more than 8”
at a time. Continue to do this around the frame
as each untucked section gets halved so fabric is
evenly distributed.
8
STEP B
STEP B
STEP BSTEP B
ROTATE FLOOR BASES x2
STEP ASTEP BSTEP C
RAISE PIN
CLICK
ROTATE
7

910
RAISE FRAME AND INSERT SUPPORT
STEP ASTEP B
CONNECT INSERT x2
LED POWER CONNECTION x2
NOTE: Connect
extension cord
to top row of
LED strips.
STEP ASTEP B
INSERT
CLICK

LOWER FRAME AND INSERT FABRIC FRONT
11
RAISE FRAME INSERT SIDE PLATES x2
12
STEP ASTEP B

Disassemble Plikó in reverse order.
See case lid for detailed packaging instructions.