Agit 8FT SSR SUP User manual

USER
MANUAL
AGIT GLOBAL, INC.
www.agit-global.com s[email protected]
No.446, Sec. 1, Fuding Rd., Caotun Township, Nantou County 54244, Taiwan (R.O.C.)

USER
MANUAL
2
Thank You for purchasing a Stand-Up-
Paddle-Board [SUP]! We hope it brings
you as much enjoyment riding, gliding,
and sliding as we had fun in delving &
developing this unique board just for You!
Stand-Up Paddle Boarding, or in Hawaiian
language, Hoe He’e Nalu, is an emerging
global sport with a Hawaiian heritage. The
sport is an ancient form of surfing that began
as a method for surfing instructors to manage
large groups of learning surfers. Standing
on the board gave instructors a higher
viewpoint, increasing visibility of what was
going on around them-such as an incoming
swell or big set wave. In the early 1960’s, The
Beach Boys of Waikiki would stand on their
long boards while using outrigger paddles
to traverse out to tourists wishing to take
pictures of them surfing the waves of Waikiki.
The sport provides an excellent Core Body
Workout and can be done in the ocean,
river, or lake ! It’s versatility will simply amaze
you as your new SUP can be ridden on days
when there is surf [waves] or even when
there are no waves at all just gliding on the
water’s surface !
The Stand-Up-Paddle-Board [SUP] is
designed for beginners to advanced SUP’ers
Alike. Our board dimensions provide strong
stability on the water and our lightweight
water resistant material [Water Barrier Skin
& Hybrid Composite Core] give strength and
durability as well as make your board easy
to carry and transport ! The Paddle can be
easily adjusted to accommodate the desired
heights of most riders. Typically, a rider
needs a Paddle extending from the bottom
of the feet to 6-12 inches above their head.
Please read through the instruction manual
to properly install the Fin and Leg Leash.
Please Always Carefully Examine Water
Conditions in your area, making sure
to steer clear of Rocks, Reefs, Boats, or
Other Inherent Water Hazards. We highly
recommend wearing only US Coast Guard
Personal Floatation Devices [PFD] while
SUP’ing ! Have fun and ride safely !
ALOHA!

USER
MANUAL 3
INDEX
11
PAGE
04
PAGE
06
PAGE
8
PAGE
10
PAGE
Contents
Fin Installation
Leash Installation
Paddle Sizing
Board Care Information
5
1
2
3
4
Let’s get started…

USER
MANUAL
4
Insert Fin into fin box by inserting brass
pin of Fin into the opening of fin box, as
shown above.
First remove the protective tape, then
remove the screw from the metal plate.
Fin Fin
Insert the screw into the fin.
Screw
Fin
Screw
Metal Plate
1
3 3.1
2
Let’s install the Fin!
1

USER
MANUAL 5
DO NOT USE EXCESSIVE FORCE WHEN TIGHTENING SCREWS.
Slide Fin backwards into position, as
shown above.
Push Fin down, as shown above.
Fin
Fin
Fin
Attach Fin to metal plate with screw, as
shown above. Then tighten screw.
Do not over tighten.
When putting the fin in for flat water
use, you can put the fin forward. If
using it in the surf, put the fin further
back in the fin box.
Screw
Metal Plate
45
76
CAUTION

USER
MANUAL
6
Pull Leg Leash Rope through eyelet as shown
above and below.
2
1
1.1
Let’s install the Leash!

USER
MANUAL 7
Pull leg cu through Leg Leash Rope as shown
above.
Pull Leg Leash Rope tight. Installation complete.
2
3

USER
MANUAL
8
Determine desired Paddle length. Most riders
prefer Paddle length to be 6-12 inches taller than
the top of their head.
Pull forward the tab on the adjusting mechanism
to free the Locking Pin.
Pull Paddle Handle upward to extend shaft length
to desired height.
3
1
2
3
Before we ride...
6”-12”

USER
MANUAL 9
Push tab so that Locking Pin securely fits into
hole.
There will be a clicking sound when Locking Pin
is securely fitted into desired hole.
Paddle length can be readjusted by following
same procedure.
Click!
4
5
6
Are you ready to size your Paddle?

USER
MANUAL
10
Please use caution when using
your Paddle. Never swing your
paddle at another rider or use
your paddle to push o Boats,
Docks, Reefs, or other Sup’ers.
Misuse could cause harm to
someone or ocean property.
Avoid riding your SUP onto the
sand, shallow bank, or ride over
rocks and reef. You can prolong
the life of your board by being
cautious of the SUP fin box that is
located at the tail section of your
new board. Never paddle your
board over another swimmer or
surfer.
We strongly suggest removing
the fin when transporting the
board to prevent damage. Always
screw the screw tightly back into
the metal plate on the fin box to
prevent the plate from falling out.
Rinse your board with fresh water
after every use to remove dirt,
sand, and salt residue. Take apart
paddle after each use and rinse
with fresh water and let dry before
putting back together.
Store your board away from direct
sunlight, in a cool, dry location.
If your board has a hole or scratch
in the foam surface, you can
purchase any “Non-Solvent” based
glue to repair it. Spread the glue
inside the hole or scratch and let
dry before using. We recommend
using Gorilla Glue or 3M 5200
marine sealant which can be
purchased at most hardware or
drug stores.
You can also use any “Non
Solvent” based glue to repair side
rail seams (where the slick bottom
and foam surface join together).
Spread the glue in seam and let
dry before using the board.
The boards may be slippery when
they are new, if so you can always
rub some wet sand on the deck of
the board.
Fins, Leashes, Paddles are available
for purchase.
Please call your nearest dealer
for more information.
RECOMMENDED USER WEIGHT LIMIT NOT TO EXCEED 120LBS.
1
2
3
4
5
6
7
9
8
4Some additional information...

USER
MANUAL 11
FIN x1
LEG LEASH x1
1
2
5
Contents!

PLEASE CONTACT YOUR NEAREST DEALER IF YOU HAVE ANY QUESTIONS OR INQUIRIES.
AGIT GLOBAL, INC. www.agit-global.com [email protected]
No.446, Sec. 1, Fuding Rd., Caotun Township, Nantou County 54244, Taiwan (R.O.C.)