SKLZ QUICKSTER FUTSAL GOAL User manual

Thank you for choosing the SKLZ Quickster Futsal Goal. We are dedicated to providing you with the best tools and instruction possible to help you prepare for your sport.
If there is anything else we can do to help, don’t hesitate to send us an email at [email protected] or give us a call at 1-877-225-7275.
BEFORE YOU BEGIN:
• Read all instructions carefully before using. If the instructions are not followed correctly, it could result in injury or damage to the product.
• Always check for wear and tear before use. If any is found, do not use the product.
• If you are missing any Quickster Futsal Goal components, please contact SKLZ customer service toll free at 1-877-225-7275.
iWARNING:
PHYSICIANS WARNING: Not all exercise equipment and programs are suitable for everyone. It is recommended that you consult your physician before using this
equipment or beginning this or any other exercise program.
• Recommended for athletes over 14 years old. Athletes under the age of 18 should use the Quickster Futsal Goal under strict adult supervision.
• Quickster Futsal Goal is under tension when set up. Please take the utmost care when releasing the tension during disassembly. Failure to do so may result in injury.
• Adult assembly required.
• Do not climb or hang on the Quickster Futsal Goal.
• When in use, make sure the Quickster Futsal Goal is set up in a clear area to avoid injury and/or damage to property.
• To avoid pinching, use caution when connecting the push-button tubing.
iCAUTION:
• Keep away from fire and heat sources.
CARE:
•Avoid storing the Quickster Futsal Goal in extremely hot or cold environments as this could reduce the life span of the product.
• When done, disassemble Quickster Futsal Goal and store after use. Do not leave Quickster Futsal Goal outdoors.
V1
FUTSAL GOAL
GETTING STARTED
3M x 2M
PATENT NO.: U.S. 8,246,496; 8,579,737;
9,162,127; CHINA 101678299; EU EP2146786
B1. ADDITIONAL U.S. AND WORLDWIDE
PATENTS PENDING
IDEA SUBMISSION
If you have an idea for a new and innovative sport
training product, visit sklz.com to submit your concept.
Some restrictions may apply.
1-YEAR LIMITED WARRANTY
This warranty does not cover damages resulting from accident, misuse, abuse or lost merchandise and is only valid in the USA. Need proof of purchase for
warranty coverage. Questions? Email [email protected] or call toll free 1-877-225-7275.
Made in China. ©2016 Pro Performance Sports, LLC. All rights reserved. Manufactured and distributed by SKLZ/Pro Performance Sports: 2081 Faraday Avenue, Carlsbad, CA 92008 USA.
SKLZ is a registered trademark of Pro Performance Sports, LLC, its subsidiaries and affiliates. Product features, appearance and specifications may be subject to change without notice.
Unauthorized duplication is a violation of applicable local and international laws.
QUICKSTER®®

VISIT SKLZ.COM TO LEARN MORE
ASSEMBLY
NET
ABASE FRAME BB TENSION-TITE™
SUPPORT POLES (2)
BC GROUND STAKES (4) D
Remove the ground stakes and detach the net from the frame.
WARNING: Futsal Goal is under tension when assembled. Please take the utmost care when releasing the tension during disassembly.
Failure to do so may result in injury.
Hold one pin in one hand and one Tension-Tite™ support pole in the other, while pulling the pin out of the clip. Repeat on the other side.
Remove the net webbing attachments from each side of the frame. If needed, air dry the net before you fold and place it into the carry bag.
Pull the Tension-Tite support poles out of each side of the base frame, and unlink and fold them down to store.
NOTE: Store Tension-Tite support poles in the carry bag with the round tops facing away from each other.
Unlock the push-buttons on the base frame to unlink the frame. Fold and store in carry bag.
STORAGE
IN THE BOX
B
Push-Button Attachment
C
C
STEP 1 - BASE FRAME AND TENSION-TITE™ SUPPORT POLES
NOTE: Base frame and Tension-Tite support poles come preattached by elastic.
1Lay out one Tension-Tite support pole (C) and link together to form a straight pole. Repeat with second Tension-Tite support pole.
Lay out base frame (B) and link the frame together. Make sure to secure the poles with the push-buttons.
WARNING: To avoid pinching, use caution when assembling the push-button.
NOTE: The slight bowing on the base frame is part of the Tension-Tite system design.
2Slide the Tension-Tite™ support poles into each side of the base frame.
NOTE: Ensure support poles are fully inserted. Failure to do so may result in damage to the Futsal Goal.
2.
2.
1.
1.
1.
Webbing Attachment
B
A
STEP 2 - CONNECT THE NET TO THE FRAME
1Unfold the net (A), and make sure that the top SKLZ logo on the net is facing away from the frame.
Connect the net loops on the bottom of the net to each side of the frame.
2Attach net to top of support pole by inserting the pin at the top of the pole into the clips attached to the net.
Repeat on the other side.
3 Secure the net to the frame by wrapping the hook and loop straps around both the Tension-Tite support poles and the base frame.
NOTE: Check the frame to make sure it is securely and fully
assembled with the net before securing to the ground.
ONLY secure stakes
where indicated above.
SIDE
STEP 3 - SECURE THE FUTSAL GOAL TO THE GROUND (IF ON GRASS)
1Place your Futsal Goal in the desired location. Make sure that you are on level ground. Secure the goal into the ground with the
included ground stakes (D). If you are unable to press them into the ground with your hand or foot, you may use a mallet.
NOTE: Do not use ground stakes on the back of the base frame. Poles will bend, and tension system will not function properly.
NOTE: Care should be taken when pressing in the ground stakes. Poles can be bent if driven too far into the ground or hard surface.
CAUTION: Make sure the Futsal Goal is secured into the ground before play. During play, make sure that the ground stakes are
secured regularly as a loose ground stake may cause injury.
2.