AGPtek V380 User manual

CONTENTS
01/12
13/24
25/36
37/48
49/60
English
Deutsch
Italiano
Español
Français

Search for "V380" on Google Play or App store and
download it.
Log in&Register
You will need to register for the first use. Enter your
name and password after registered, or you can also
choose “ Local login ” to experience parts of its
functions without registration.
Enable the Wifi connection with the device name
begins with “MV.”(eg. MV28604495).
Pair with your phone by Wifi
1. Open the APP“V380 ”and choose login or“Local
login”.
2. Choose AP quick configuration
1

3. Choose the device name begins with “MV.”(eg.
MV28604495), which you can also find on the
camera. Tap to connect with the camera.
4. Waiting for connection.
2

5. Enter your Wifi password and choose “Save”.
6. Tap to play the video recording.
3

7. Choose “Set password”to protect your privacy.
8. Set the camera Password(required) and
Tap”Confirm” to view the video recording.
4

Watch the video recording after connecting
to LAN
Insert the included small screwdriver to the reset
hole for a few seconds to reset the camera.
1. Turn on the Wifi of your phone, and search the
device name begins with “MV.”(eg. MV28604495),
which you can also find on the camera. Pair with the
camera.
2. Open the “V380”, choose login or “Local
login”, then tap the”+”on the top right corner
and choose”Add networked device”to enter.
5

3. Choose“Add to list”, tap to set the password.
4. Choose“Set password”, then enter the
password(required) and choose“Confirm”, then
tap to watch the video recording.
6

How to switch the connection from LAN to
WAN?
1. Choose”Device”in the bottom menu.
2. Choose “Network settings”, and check
the“Station mode”, choose from the searched
router and enter the password, then choose
“Save”.
7

Instructions for iOS system
Instructions for iOS system after connected to LAN
1. Tap to connect the device with its name begins
with “MV.”(eg. MV28702706).
2. Open the APP”V380”and select “Local login”.
8