AVer FB2027 User manual

AVer IP Camera
User Manual

Table of Contents
USING THE IP CAMERA BROWSER INTERFACE............................................................1
LIVE VIEW..........................................................................................................................1
SYSTEM >GENERAL...........................................................................................................4
SYSTEM >GENERAL >MAINTENANCE...................................................................................4
To Upgrade the IP Camera Firmware.........................................................................5
SYSTEM >GENERAL >DATE &TIME.....................................................................................6
SYSTEM >GENERAL >SYSTEM LOG ....................................................................................7
SYSTEM >USER MANAGEMENT ...........................................................................................8
SYSTEM >USER MANAGEMENT >ACCOUNT..........................................................................8
To Create a User Account ..........................................................................................8
To Delete or Edit a User Account................................................................................9
SYSTEM >USER MANAGEMENT >CONNECTION...................................................................10
SYSTEM >NETWORK ........................................................................................................11
SYSTEM >NETWORK >SETTING........................................................................................11
SYSTEM >NETWORK >SERVER.........................................................................................13
SYSTEM >NETWORK >DDNS ..........................................................................................14
SYSTEM >NETWORK >QOS.............................................................................................15
SYSTEM >NETWORK >OTHERS ........................................................................................16
SYSTEM >SECURITY ........................................................................................................18
SYSTEM >SECURITY >IP FILTER.......................................................................................18
To Add Filter.............................................................................................................18
SYSTEM >SECURITY >802.1X .........................................................................................20
SYSTEM >SECURITY >RTSPAUTH...................................................................................21
SYSTEM >IMAGE..............................................................................................................22
SYSTEM >IMAGE >OSD ..................................................................................................22

SYSTEM >IMAGE >PREFERENCE.......................................................................................23
SYSTEM >IMAGE >EXPOSURE ..........................................................................................24
SYSTEM >IMAGE >ADVANCED...........................................................................................25
SYSTEM >IMAGE >PRIVACY MASK ....................................................................................27
SYSTEM >VIDEO STREAM.................................................................................................28
SMART STREAM ...............................................................................................................30
SYSTEM >AUDIO..............................................................................................................31
SYSTEM >SD/MICROSD CARD >MANAGEMENT .................................................................32
SYSTEM >SD/MICROSD CARD >FILE SEARCH...................................................................33
APPLICATION >MOTION DETECTION...................................................................................34
To Set the Motion Detection .....................................................................................34
APPLICATION >IVA...........................................................................................................35
Application > IVA > Cross Detection.........................................................................36
Application > IVA > Tampering .................................................................................37
Application > IVA > Missing Object...........................................................................38
Application > IVA > Suspicious Object......................................................................39
APPLICATION >EPTZ........................................................................................................40
To Setup the ePTZ....................................................................................................40
EVENT SETTING ...............................................................................................................42
To Setup the Event...................................................................................................42
STATUS INFORMATION .......................................................................................................45
USING MFZ FUNCTION .....................................................................................................46
USING QUICK FOCUS........................................................................................................49
USING RTSPAND ONVIF PROTOCOL TO ACCESS THE IPCAMERA .......................................51
COPYRIGHT......................................................................................................................52
NOTICE..............................................................................................................................52

1
ENGLISH
Using the IP Camera Browser Interface
The admin have the full access to the IP camera browser interface. The menu on the left, you can
expand and navigate to access all the features.
Open the IE browser and enter the IP address of IP camera to access the IP camera Web configuration
interface. In login dialog, enter the ID and Password (default is admin/admin).
Live View
In the Live View page, all three user levels can view and change the language setting, the IP camera
video stream setting, use the digital or RS-485 Pan and Patrol control, capture screen shot, record
video, turn on/off 2-way talk, mic and volume, and adjust the zoom and volume level.
Name Function
(1) Language Select the browser interface language.
(2) Protocol Type Select the protocol for the live view video stream.

2
Name Function
(3) Video screen Change the video screen display.
Display the actual video pixel size.
Display the video screen in compact size.
Display the video on the entire screen. Press ESC to exit full
screen mode.
(4) Stream Switch to view the video stream type. The IP camera can send
multiple video streams of up to 3 types. To change the video stream
setting, go to System > Video Stream.
(5) Direction buttons - Use to move the position of the view point while in zoom mode.
- Use to control the position of the RS-485 pan tilt device
(6) Pan & Patrol button Pan: automatically move the view point from left to right when in
zoom in mode.
Patrol: automatically move the view point around the preset locations
in Application > Patrol.
(7) Digital /RS-485 - Select Digital to control the IP camera ePTZ operation. This
allows you to closely view the target area without having to
physically move the IP camera. The image will be zoomed in and
you can use the direction control to pan the zoomed image.
- Select RS-485 to control the PTZ driver or scanner via RS-485
connection to I/O terminal block. The IP camera is mounted on
an RS-485 pan tilt device.
(8) Speed control Set the speed when panning, tilting, or zooming.
(9) MFZ function Motorized focus and zoom the IP camera(see aslo Using MFZ
Function)
(10)Zoom control Reset zoom level.
Increase zoom level.
Decrease zoom level.
(11)Quick Focus It help user to adujst foucs of IP camera more easily(see aslo Using
Quick Focus).
(12)Capture Capture and save the image on the screen in *.bmp format.

3
ENGLISH
Name Function
(13)Record Start/stop audio and video recording. The recorded video will be
saved in *.mp4 format.
(14)2-way talk Enable/disable mic from IP camera browser side.
(15)Mic Enable/disable mic from the IP camera side.
(16)Sound Enable/disable audio from the IP camera side.
(17)Volume bar Adjust the volume.

4
System > General
In this section, only admin level is authorized to configure the IP camera general settings. There are 3
tabs in General settings: Maintenance, Date & Time, and System Log.
System > General > Maintenance
In the Maintenance tab, the admin can easily backup and restore the IP camera setting, reboot the IP
camera, reset all the settings to factory default, and upgrade the IP camera firmware.
Name Function
(1) Reboot Restart the IP camera.
(2) Information Displays the explanation of Reboot, Reset, and Factory default.
(3) Reset Set all the configuration settings back to default except the user
management and network settings.
(4) Factory Default Set all the configuration settings back to factory default.
(5) Export Settings Backup all the configuration settings.

5
ENGLISH
Name Function
(6) Import Settings Restore or replace the current settings with the backup file.
(7) Firmware Upgrade Upgrade the firmware to the latest version.
To Upgrade the IP Camera Firmware
1. Download the file from our
website and save it in your
computer hard disk.
2. Click Browse. Locate and
select the file and click Open.
3. Click Apply. Wait till you see the
massage “Firmware Upgrade
OK!!”. You may now click the IE browser refresh button or press F5.
The login page will appear.

6
System > General > Date & Time
In the Date & Time tab, admin can manually set the date and time setting or synchronize it with the
Internet time server or the computer date and time setting. This is used to record the time whenever
there is a significant occurrence listed in system log and is also used in event scheduling. After
completing the setting, click Save to apply the new setting and Cancel to keep the old setting.
Name Function
(1) Current Date & Time Display the current date and time setting.
(2) Date Format Select the date display format.
(3) Time Zone Set the local time zone.

7
ENGLISH
Name Function
(4) Setting Method Select the date & time setting method.
Sync with current PC: obtain the date and time setting on the
current login computer.
Sync with NTP Server: obtain the date and time setting from NTP
server. In the drop-down list, select the NTP host name.
Manual: manually set the date and time. Click Now to set the date
base on the computer time setting and Done to close the date and
time interface.
System > General > System Log
In the System Log, admin can view and search the significant event occurred in the IP camera.

8
System > User Management
In User Management, only admin level is authorized to create, delete, and edit account to connect to
the IP camera and configure the client connection setting. There are 2 tabs in User Management
setting: Account and Connection.
System > User Management > Account
In Account page, admin can create, delete and set the access level of the user account.
To Create a User Account
1. Click System > User Management > Account tab.
2. Enter the User Name,User Info, and select the User Type. Then, click Create.
User Type Access rights
Admin Allow to access all the configuration pages.
Operator Allow to preview live image, modify and adjust certain settings; except in
System > General, User Management, Network, and SD/microSD Card >
Management. As for the I/O Control, admin could enable/disable to allow
operator to access it.
Viewer Only allow to access the preview and status information pages.

9
ENGLISH
3. Enter the same password in Password and Confirm Password column. Then click Add.
To Delete or Edit a User Account
Select the user account that you want to delete or edit.
Click Cancel to cancel the operation.
Click Modify to apply the new changes. Make sure to edit the account before clicking the Modify
button.
Click Remove to delete the account.

10
System > User Management > Connection
In Connection page, admin can set the total number of user for accessing the IP camera, and filtering
the IP address to allow or deny accessing the IP camera.
 Http Connection: Select the connection type. For higher security data transmission level, select
http & https or http only. The authenticated and encrypted the data is over the SSL (Secure
Socket Layer).
 Maximum Number of Clients: Select the max number of users to simultaneously access the IP
camera.

11
ENGLISH
System > Network
In this section, only admin level is authorized to configure the Network settings.
System > Network > Setting
In Setting page, you can configure the type of network connection for IP camera and assign name for
the IP camera. Depending on the network connection, IP camera can be accessed from the computer
within the same local area network (LAN) or anywhere with Internet connection. After completing the
setting, click Save to apply the new setting and Cancel to keep the old setting.
Name Function
(1) Device Name Assign name for the IP camera.
(2) Network HW Switch
Enable/disable to use the IP camera DIP switch network setting. If
this is enabled, make sure the DIP switch behind the IP camera is set
properly.
* ( Available for FX series and SF2121H-R Box type only )

12
Name Function
(3) Network Type Select the type of IP camera network connection.
DHCP: select this option to automatically obtain an IP address from the
DHCP server, whenever the IP camera is connected to the network.
You can use the IP camera UPnP Discovery software in the CD to
easily setup the IP camera network.
Static IP: select this option to manually assign a fix IP address to the
IP camera.
PPPoE: select this option to access the IP camera anywhere with
Internet connection. To use this option, this requires an account
provided by the ISP. Set this setting while connected to the LAN and
click Save. Connect the IP camera directly to DSL or cable modem.
(4) IPv6 Settings Enable IPv6 support
Select “Manually set the IP address” to specify IP address manually.

13
ENGLISH
System > Network > Server
In Server page, you can configure the Email, FTP, and NAS setting. It is necessary to configure the
server settings so that IP camera can perform the task in the Event setting when a trigger is activated.
You can configure either one or all of it. After completing the setting, click Save to apply the new setting
and Cancel to keep the old setting.

14
System > Network > DDNS
In DDNS page, you can configure the dynamic domain name service setting. DDNS is a service that
provides fixed host and domain name for the IP camera with dynamic IP address. It automatically
updates the new IP address to the dynamic server of the domain name.
To use this feature, you need to register a domain name at http://dyn.com/dns/ . Enter the DDNS
domain name, user, password and enable DDNS Enable check box. After completing the setting,
click Save to apply the new setting and Cancel to keep the old setting.

15
ENGLISH
System > Network > QoS
In QoS page, you can configure the Quality of Service setting. Enabling the QoS allows you to set the
parameter and prioritize the IP camera to provide stable streaming performance at a certain level in a
traffic network.

16
System > Network > Others
In Others page, you can enable/disable the UPnP setting. If your router does not support UPnP function,
you can enable the UPnP forwarding and set the port mapping.
 UPnP Support: The IP camera supports UPnP, if this service is enabled on your computer.
[Note] UPnP must be enabled on your PC.
 UPnP Port Forwarding: If the IP camera is installed behind the firewall, please select ON to
enable it.
 HTTP Port: Setup web page connecting port and video transmitting port (Default is 80).
 HTTPS Port: AVer IP Camera supports encrypted browsing using HTTPS.
 RTSP Port: Setup port for RTSP transmitting (Default is 554).

SNMP (SimpleNetworkManagement Protocol) provides a simple framework for
administering networked hardware. SNMPv1, SNMPv2c, and SNMPv3 can be enabled
simultaneously.
SNMPv1 and SNMPv2: The term "Community name" in SNMPv1 and SNMPv2 can be roughly
regarded as key. The person who has the community name has the authority to read or edit the
information of IP camera via SNMP. Check the box to enable SNMPv1 and SNMPv2 protocol,
and specify the community name for Read/Write and Read only community. The user who
uses read community name to access the IP camera cannot modify any data of this camera