AHA smart PASS ASP-2000 User manual

•Before using the product, please read this manual carefully and keep it for later.
•Image drawings and notations in this document may slightly differ from the actual product.
•The contents of this document are subject to change without notice.
English
User’s Manual
Non-contact temperature measurement & facial recognition
for access control system
Copyright ©2020 AHA INC CO.,LTD. All Rights Reserved
www.ahatouch.com
Rev.1.0
⚫Model : ASP-2000
⚫Stand Assembly Manual

1. Smart Pass Overview.………………………………………………………………………………..…...………...
1.1 Smart Pass Introduction..…………………………..……………………………..…...………...….
2. How to use Smart Pass...………………………………………………………………………………………….
2.1 How to run Smart Pass.……………………………………………………………………..............
2.2 How to use Smart Pass.……………………………………………………………………..............
3. Smart Pass screen description………………..……………………………………………............………...
3.1 Initial screen...………………………………………………………………………………………..……..
3.2 Main menu..………………………………….……………………………..……………………………….
3.3 Setting……………...…………………………………………………………….......................................
3.4 Registration of access information …………….……………….……………………………..
3.5 Device information………………………………………………………………………………………..
3.6 Access record……………….……………………………….……………………………………………...
3.7 List of registrants …………………………..…………………………………...................................
4. Countermeasure………………………………………………………………………………..................................
5. Product specification.…………………………………………………………..………….…………………........
6. Product diagram…………………………………………………………………….……………..………………….
7. Product description ………..…………….…………………………………………………………………….
8. Connectivity description….......................…..……………………………………………………………..……….
9. Precautions for use and storage management..………………………………………………….
10. Assemble adjustable floor stand ………………………………………………………………..…….
11. Assemble floor stand ………………………………..……………………………………….…………..…….
12. Assemble table stand …..……………………………………………………………………………..…….
2
2
2
2
3
5
5
5
7
18
19
20
21
22
24
25
26
27
28
29
32
33
Contents

1. Smart Pass Overview
1.1 Smart Pass Introduction
Smart Pass is an advanced AI (Artificial Intelligence) face recognition and heat
Check access control system that accurately identifies a person and measures
temperature even if the mask covers part of the face or wears glasses and
a mask at the same time with advanced deep learning technology.
2. How to use Smart Pass
2.1 How to run Smart Pass
1) Fully understand how to use it through the user’s manual
2) Connect the power adapter and DC power line to check if it works properly.
3) Check if there is any foreign object in the sensor area.
4) Do not install in a place where there is direct sunlight or objects related to
heating devices such as light bulbs.
5) It is recommended to use between 15 ℃ and 30 ℃.
6) How to turn on the device
When connected with the power adapter and DC power line, Smart Pass starts
to work.
The body temperature measurement program is automatically executed
without running a separate program. -> It is recommended that you wait for
30 minutes before using the Android operating system and the temperature
measurement program to detect the ambient temperature in the stabilization
stage.
2

< How to measure accurately >
If the forehead is placed on the
red dot on the screen, the body
temperature is measured
accurately
(measured distance is 30cm).
If the forehead is not placed on
the red dot on the screen,
accurate measurement will not
be possible.
If the forehead is not placed on
the red dot on the screen,
accurate measurement will not
be possible.
2.2 How to use Smart Pass
-The measuring distance should be measured at 30cm.
-The measuring range is 34℃ ~ 42℃.
-When measuring body temperature, do not cover the main measurement areas
(forehead, eyes, face) with clothes or other means.
-If the body heats up due to physical activity, wait for the body heat to return to
the state in which there was no physical activity after a certain period of time
before measuring.
-When measuring body temperature, do not move for a certain period of time
(more than 2 seconds).
-If the face is aligned with the red dot on the screen, the body temperature is
measured and the body temperature is displayed.
-When body temperature exceeds 42℃, it is displayed as HIGH, and when body
temperature is below 34℃, it is displayed as LOW.
XX O
3

< Screen display after measurement>
At normal body temperature
(Below the warning set value)
Body temperature is displayed
on a green background
At high body temperature
(Over warning setting value)
Body temperature is displayed
on a red background
Wrong wearing a mask
On a red background
'Please wear a mask' indication
Not wearing a mask
On a red background
'Please wear a mask' indication
4

3. Smart Pass screen description
3.1 Initial screen
This is a screen for face recognition and temperature measurement.
The current date & time are displayed at the top. When a person is detected,
contextual phrases or temperature measurement results are displayed.
Depending on the setting, information such as IP, company name, and version
may be displayed at the bottom of the screen.
3.2 Main menu
When the mouse is connected and the wheel button is pressed, the password
input window appears, and when the correct password is entered, the main
menu is displayed on the screen. ※ The initial password is '123456'.
5

No. Name Description
1 Status information The set device name, IP, user name, and login
status are displayed.
2 Log In Management Used to connect the device to a network
(not currently supported)
3 Application settings Open the Smart Pass detailed settings menu.
4 Face registration Capture a person's face and register it in
the database.
5 Application information Check various information of the device.
6 Pass record Displays a list of people who have measured the
temperature.
7 Face database Shows a list of people registered in the database.
1
2
3
6
4
5
7
6

3.3 Setting
This is a detailed menu for setting up a Smart Pass.
(1) Name setting
Set the device name and
company name.
No. Name Description
1
Device
name setting
You
can set the device name and company name.
2
Detailed
setting menu
This is a detailed setting menu related to face recognition and
body temperature measurement functions.
3
Detailed
recognition
setting
This menu allows you to set detailed face recognition sensitivity,
comparison count, and biometric detection.
4
Volume
setting
You
can set the sound volume.
5
Startup
setting
You
can set the program startup when starting the device.
6
Registration information
display
setting
You
can set the information view displayed at the bottom of
the
initial
screen.
7
Recognition
result
setting
You
can set the face recognition result.
8
Password
setting
You
can change the password.
9
Screen
resolution
setting
You
can change the camera screen resolution.
10
Screen saver
brightness setting
You
can set the brightness in screen saver mode.
11
Timer
setting
You
can set the function to restart or shut down the device at a
set
time on a24-hour basis.
12
Relay
setting
This
is the setting when using the relay function in conjunction
with
the door.
13
Others
Firmware
upgrades or server communication can be established.
14
Program
initialization
This
is the function to initialize the program.
11
10
1
2
3
4
5
6
7
8
9
12
13
14
7

11
10
(2) Inspection setting
This is a detailed setting menu related to face recognition and temperature
measurement.
No.
Name Description
1Temperature
Test Turns the temperature test function on or off.
2Temperature
Compensation
It is used to calibrate the temperature when measured different from
the actual temperature by the external temperature. In case of manual
setting, detailed input field appears. Input value is between 0 ~ 1 ℃.
3 Scene selection Setting whether the device is installed indoors or outdoors.
4Measuring
Method
You can choose a fast scan or a precise scan. You can increase the
face recognition rate when setting up a precise scan.
5Alarm threshold
If the measured temperature is higher than the entered value, an
alarm message is displayed. When the temperature alarm is on,
a beep sounds.
6Temperature
Alarm Enable or disable the Alarm.
7Temperature
Display
Change the temperature display format to Celsius (℃) or
Fahrenheit (℉).
8 Fan It set the operation of the fan for heat dissipation.
9 Mask detection
Measure your temperature and check whether wear a mask or not.
When a person without a mask is detected, display a no-access sign
and you can hear the voice.
10 Stranger mode When it detects a person who is not registered in the database,
it notifies them that it is a stranger.
11 Stranger record When a stranger is detected, the captured picture is saved separately.
1
2
3
4
5
6
7
8
9
8

(3) Detailed recognition setting
When checking whether it is a stranger or registered in the database, the
accuracy and the number of identifications are set.
1
2
3
No. Name Description
1Test threshold
Determines the precision of comparison with
photos in the database. The lower the number,
the more precise the comparison. Input value is
10 ~ 20.
2Comparison count
Compare and check the number of times
entered.
The bigger the number of comparisons, the
more accurately a person can be judged. Up to
0~99 can be entered.
3
Facial Liveness
Detection(Face
Biometric
Authentication)
This is to detect if a person in front of camera is
a real person or manipulated image (photo) and
stop spoofing attempts.
9