AIBLUE GoFindMe Setup guide
Online Manual
Welcome
GoFindMe GPS Tracker gives you a complete solution of tracking, locating and communicating even with no network service. It’s perfect
for hiking, camping, or any other outdoor activities and family use. Please read this instruction carefully so that you can make full use of
GoFindMe.
GoFindMe Device Introduction
Power Button
Press the power button for more than 3 seconds to turn on/off GoFindMe device. There will be a beep sound when the device is turned on.
SOS Button
Press the SOS button for more than 3 seconds to activate/deactivate SOS mode.
USB Charging Port
Charge the GoFindMe device by connecting it to a PC USB port, a mobile phone adapter, or a portable charger via the Micro USB cable.
LED Indicator Light
Activity
Status
LED Light
Charging
Battery 0-99%
Green, breathing
Battery 100%
Green, always on
Connection
Connected with GoFindMe
App
Blue, lights for 3s
Working
Normal Status
Green, blinks every 10s
SOS
SOS Mode Activated
Red, blinks every 0.5s
SOS Mode Deactivated
Green, blinks every 0.5s;
lasts 5s
Speaker
Play voice messages, device beeps, and SOS alerts if there is any.
Specifications
Dimensions: 130mm*36mm*17mm
Weight: 85g (battery included)
Transmit power: < 1W
Bandwidth: 500 KHz
Frequency Band: 902-928 MHz (US), 869.4-869.65 MHz (EU)
Battery: Built-in 1000 mAh Li-Battery
Charge interface: Micro USB
Input: 5V/1A
Working temperature: -20°C-60°C
Protection: IP67 waterproof, dustproof and shockproof
Mobile device connection: Bluetooth Low Energy Communication
App compatibility: iOS 10.0 or later & Android 5.0 or later
GoFindMe App Main Features
1.Download App
- Scan the QR code to download the App.
- Search “GoFindMe” in Google Play Store or App Store to download the App.
2.Pair with GoFindMe
- Turn on your GoFindMe device.
- Enable Bluetooth on your phone.
- Open GoFindMe App and then it will automatically scan and list the nearby devices. Please select your device to connect.
- Or you can tap the icon to complete the connection.
3.App Main Screen
Once launched, the app will show you the map of your current location by default. And you can find all the features and the real-time
location of all groupmates on this default interface.
4.Groupmates Management
When you turn on the GoFindme device, It automatically connects to other GoFindMe devices nearby without extra settings.
Tap the icon on the upper left of main screen to enter the Groupmates Management interface.
- You can check the status of all groupmates on the list.
- Tap “Rename” to change to a nickname or an alias for easier recognition.
- Tap “Locate” to check the real-time location of any groupmate.
5.Tracking
5.1 Real-time Tracking
You can check the real-time location of any groupmate on the map. You can also check your movement direction.
- Tap the icon of any groupmate on the main screen to check the device battery, the distance, and the time of last location update for
that person.
- Tap the icon on the upper right to check the trace records. You can also turn on/off the trace records there.
5.2 Anti-lost Alert
- If there are no messages or location updates from any other groupmates over 15 minutes, GoFindMe App will alert you and your
groupmates that you may be left behind.
- If the location of a groupmate has not been updated over 15 minutes and there are no messages from this groupmate either, GoFindMe
App will prompt you that this mate may have got lost.
5.3 Location Update Frequency
The location will be updated at a fixed frequency. You can set the location update frequency in settings according to your needs.
- Tap the icon at the bottom of the main screen to enter the general settings interface.
- Tap “Location Update”.
- Select the update frequency according to your preference.
Note: What is the Real-Time mode in App and when should I use it?
You can customize the location update frequency through the App, selecting from 600S, 60S, 30S, 10S, or Real-Time. Real-Time mode
refers to instant location updates. The higher the update frequency is, the more accurate location information you will get, but meanwhile
the battery drains faster.
Normally, we suggest choosing the 10S mode (the default Location Update Frequency), which would be enough for most practical needs.
However, if you need to enable the Real-Time mode in some cases, we suggest:
- Only enable the device that needs to be tracked in real time to prevent communication conflict.
- Make sure there is enough battery of the device in advance to prevent losing connection due to low battery.
For example, if you want to track real-time location of your kid, we suggest:
1) For the GoFindMe your kid takes: Connect it with your phone and enable the Real-Time mode.
2) For the GoFindMe you take: Connect it with your phone but only use the default 10S mode.
6.Message
Tap the icon at the bottom of the main screen to send text messages, built-in voice messages, real-time locations, or SOS messages
to your groupmates.
6.1 Text Message
- Type your message and tap the icon to send.
6.2 Voice Message
- Tap the icon to open the built-in voice messages list.
- Select the built-in voice message you want to send.
- Select the recipient on the list and tap “Send”.
Note: The recipient can hear the voice message from GoFindMe device and check the details of the voice message on GoFindMe App.
6.3 Real-time location
- Tap the icon to send your real-time location.
6.4 SOS
If in an emergency, you can activate the SOS mode. Then every groupmate will receive the SOS alert via both GoFindMe device and the
App.
- Tap the icon to activate the SOS mode and send out the SOS message automatically to all groupmates.
- Tap the icon again to deactivate the SOS mode if you need to cancel it.
- If you receive an SOS message, you will get an interface as below.
- Tap “View” to check the accurate coordinate, distance, and direction of this groupmate who sent the SOS message.
- Tap the icon to check the trace and find this groupmate faster.
Note: You can send text & voice messages to let the groupmate know that you have known the situation or ask for more information.
7.Trace Record
- Tap the icon at the bottom of the main screen to check your last activity trace.
- Tap the icon to share the trace record to Facebook.
- Tap the icon on the upper right to check more trace history.
8. Map
Tap the icon on the upper right of the main screen to enter the Map interface as below.
8.1 Map Type
There are 3 map types available: Satellite, Terrain, Default. You can select the map type according to your needs.
8.2 Map Management
Tap “Map Management” to rename or delete the current offline maps.
8.3 Add Offline Map
- Tap “Add Offline Map” to enter the download interface.
- Tap the icon to search for a place.
- Drag and zoom the map to select an area; choose the type and accuracy of the map and then download.
Note: A network connection is required to download offline maps. So please download the maps before an outdoor activity so that you
can use offline maps without network service.
9. POI
- Tap the icon to enter the POI interface.
- Zoom in or out the map to set the position of the POI (Point of interesting).
- Tap an existing POI enables you to delete, rename, or share it with all groupmates.
- You can stick the POI on top of the message interface to remind groupmates of the meet-up place.
10. Safe Zone
Set a safe zone for your groupmates or pets so that you can get an alert immediately when they are not in the safe zone.
- Tap the icon on the upper right of the main screen to enter the Safe Zone interface.
- Select the groupmates to set a safe zone.
- Drag and zoom the map to adjust the range of the safe zone.
11. Settings
11.1 Language
- Tap the icon to enter the general settings interface.
- Tap “Language” to select the App language.
11.2 Group Code
Set a group code to secure the real-time tracking, text messages, voice messages and SOS messages among your groupmates.
- Tap the icon to enter the general settings interface.
- Tap “Group Code”.
- Input 6 digits to set the group code.
- You can also go to Bulk Settings > Group Code to bulk modify the Group Code for groupmates' devices.
Note: Please set a same Group Code so that all groupmates can track each other in real-time, send text messages, voice messages, and
SOS messages securely without cell service.
11.3 Region Selection
Please choose the right region so that GoFindMe can work properly according to the radio regulations of different regions.
- Tap the icon to enter the general settings interface.
- Tap “Region” to change the country or the region.
- You can also go to Bulk Settings > Region to bulk modify the region for groupmates' devices.
Note: Please set the same region to ensure normal communications among groupmates.
Statements
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,,pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception,
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesire6d operation of the device.
Support
Table of contents
