Air Knight AK1000 User manual
Quick Start Guide
www.airknight.io
PROTECT YOUR AIR
The AirKnight AK1000 is an advanced, multifunctional air quality monitor that combines numerous
different types of high-quality air sensors with a built-in fan to allow real-time monitoring of carbon
dioxide (CO2), formaldehyde (HCHO), total volatile organic compounds (TVOC), PM2.5/10, air quality
index (AQI) indication, temperature, humidity and time on its digital LCD display.
WATCH OUR QUICK START VIDEO!
www.Instructions.AirKnight.io
GET STARTED - HOW TO USE
Plug in the air quality monitor and press the power button for 2 seconds to turn it on.
Note: If the device does not power on right away, then please charge it first.
STEP 1:
Wait 5 minutes for it to warm-up.STEP 2:
STEP 3: Set the time (see step-by-step directions on the next page).
STEP 4: The AK1000 will automatically turn off after 11 hours in order to recalibrate the sensors and prolong
the product life (including battery life). Turn it back on when you want to use it again.
STEP 5: Enjoy the added benefits of having an AirKnight in your home!
Note:
call our US-based customer support at +1 224 477 5846 and we will be happy to assist you.
TIME / TEMPERATURE ADJUSTMENT & CHARGING
Time Adjustment:
1Press the power button (quickly) 3 times to enter time setting mode.
3Then press the power button to switch to minutes.
4Press the left or right buttons to adjust the minutes.
Once done adjusting, press the power button to confirm and complete the
time setting.
Press the left or right buttons to adjust the hours.
2
5
Charging: Please use the included power adapter or any other power adapter that outputs at
>=1000mA. Please avoid charging with a USB computer port which only outputs 500mA and please
avoid charging with any adapter that outputs higher than 1000mA to ensure the longest battery life.
Temperature: The default Fahrenheit temperature scale may be changed to Celsius by pressing the
right button twice.
The AirKnight AK1000 was designed with a built-in CO2 alarm option. If enabled, this CO2 alarm
beeps when CO2 levels surpass 1000 ppm (which is above the desired range). The purpose of the
CO2 alarm is to notify you right away so the appropriate action can be taken immediately to improve
CO2 levels (i.e. by opening a window / door or stopping the activity causing the high reading).
CO2 ALARM
Note 1: The default setting for the CO2 alarm is OFF. The AK1000 CO2 alarm can be turned on by
simply pressing the LEFT button on the top of the monitor twice. Exposure to less than optimal
CO2 levels for an extended period of time may not be healthy and it is therefore recommended to
turn this CO2 alarm function ON.
Note 2: If you have elected to turn the CO2 alarm on, please be aware that the CO2 alarm’s beeping
will stop automatically even when CO2 levels are still above 1000 ppm if the CO2 levels are
decreasing.
Table of contents
