Airborne Athletics Finisher FlipSled FS300 User manual

FlipSled™ Training Sled by The Finisher™ Owner’s
Manual
FlipSled™
FS300
www.TheFinisher.com
FlipSled™
FS200
FlipSled™
FS100

2
FlipSled™ Rev G
www.TheFlipSled.com
READ AND SAVE THESE INSTRUCTIONS
SPECIFICATIONS
Product Specicaons
Product Dimensions
FS300 ....................................... 67.2in x 30in x 24in (LxWxH)
170.7cm x 76.2cm x 61cm (LxWxH)
FS200 ........................................... 67.2in x 30in x 24in (LxWxH)
170.7cm x 76.2cm x 61cm (LxWxH)
FS100 ....................................... 61.2in x 30in x 24in (LxWxH)
155.5cm x 76.2cm x 61cm (LxWxH)
Product Weight, Unloaded
FS300 ....................................... 260 lbs (118 kgs)
FS200 ....................................... 200 lbs (91 kgs)
FS100 ....................................... 190 lbs (85 kgs)
Product Weight, Max Load
FS300 ....................................... 690 lbs (313 kgs)
FS200 ....................................... 450 lbs (204 kgs)
FS100 ....................................... 350 lbs (159 kgs)

3
www.TheFlipSled.com
FlipSled™ Rev G
1. Read all instrucons before using the training sled.
2. This is not a toy and is intended for use by or under the supervision of adults.
3. Only use the aachments recommended or sold by the manufacturer.
4. Only ip and drive on durable, hard surfaces (ex. turf, grass, etc).
5. Do not leave outdoors in harsh condions for long periods of me.
6. If using free weights on device, secure in place with provided spring clamps.
7. Do not exceed maximum load on free weight pins.
8. Use cauon when changing weights.
9. Do not modify or otherwise alter any element of this product.
10. Do not drop on skis or ip onto skis.
11. Always use a spoer.
12. Always adequately warm up.
13. Use proper form. Disconnue use if uncomfortable.
14. Do not overexert the user with any exercise program.
15. Keep all body parts clear of path of device while in use.
16. Make sure all bolts are ght and there are no cracks in the unit before each use.
17. If maintenance is required, please contact manufacturer.
IMPORTANT SAFETY INSTRUCTIONS
This Is Not A Toy and Intended for Use By or Under the Supervision of Adults.
Ceci n'est pas un jouet et est desné à être ulisé par ou sous la surveillance d'adultes.

4
FlipSled™ Rev G
www.TheFlipSled.com
Specicaons .......................................................................................................... 2
Important Safety Instrucons .................................................................................. 3
Table of Contents .................................................................................................... 4
General Informaon ................................................................................................ 5
Body Components ................................................................................................... 6
Body Assembly ........................................................................................................ 7-10
Aachment Components ........................................................................................ 11
Aachment Assembly .............................................................................................. 12-13
Maintenance and Warranty ..................................................................................... 14
Maintenance Schedule
Cleaning
Registraon
Warranty Informaon
Contact Informaon ....................................................................................Back Cover
TABLE OF CONTENTS

5
www.TheFlipSled.com
FlipSled™ Rev G
1. Storing
For best maintenance, The FlipSled™ should be stored in a dry,
dust-free environment.
2. Moving
The FlipSled™ can be moved with one person on a at and level surface. If moving on an
incline, two people are recommended.
3. Placement
The FlipSled™ should be used on a solid, level surface.
4. Personal Safety
To reduce the risk of serious injury, read all important precauons and instrucons in this
manual and all warnings on the product before use. It is the responsibility of the owner to ensure
that all users of this product are adequately informed of all warnings and precauons. Use the
product only as described in this manual.
Airborne Athlecs assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.
Playing football, strength training, or cross training is exercise. How you begin your exercise
program depends on your physical condion. Before beginning any exercise program, consult your
physician. This is especially important for persons over age 35 or persons with pre-exisng health
problems. Frequent and strenuous exercise should be approved by your doctor rst.
Warming up is an important part of your workout and should begin every session as it reduces
risk of injury. It prepares your body for more strenuous exercise by heang up and stretching
out your muscles, increasing your circulaon and pulse rate, and delivering more oxygen to your
muscles. At the end of your workout, repeat the warm up exercises. While performing any type of
exercise roune you must drink plenty of uids. It’s important to work at your own pace.
If any discomfort should result from your use of this product, Stop exercising and consult your
doctor.
Please keep all children away from the product when product is unaended. Adult supervision
is required at all mes during use of this product.
Please ensure this product is assembled and installed by adults.
5. Equipment
Inspect the FlipSled™ before use to ensure working order.
GENERAL INFORMATION

6
FlipSled™ Rev G
www.TheFlipSled.com
3/8” x 5” Bolt x 2
3/8” Washer x 20
BODY COMPONENTS
Main Frame x 1
End Frame with Bumpers x 4
3/8” x 3.25” Bolt x 8
3/8” Nut x 10
9/16” Wrench x 2
Spring x 4
FS300 Frame
FS200 Frame
FS100 Frame
You will receive one of the following
frames depending on the model you
ordered.

7
www.TheFlipSled.com
FlipSled™ Rev G
BODY ASSEMBLY
1. Boom End Frames
Set 2 end frames with bumpers
on the ground as shown. Use
the main frame as a spacing
guide.
Helpful Notes
Set 2 end frames with bumpers
on the ground as shown. Use
the main frame as a spacing
guide.
Assembly may be easier if you
have a socket ratchet handle and
9/16” socket.
Assembly may be easier if two
adults work together to align
parts.
Assembly instrucons use FS300 frame.
All frames have the same assembly process.

8
FlipSled™ Rev G
www.TheFlipSled.com
BODY ASSEMBLY
2. Main Frame
Set the main frame on top of the
boom end frames. Closely line
up the holes.
3. Top End Frames
Set 2 end frames on top of the
main frame. Closely line up the
holes.

9
www.TheFlipSled.com
FlipSled™ Rev G
BODY ASSEMBLY
4. Bolt Middle 2 Bolts
With 2 long bolts, 4
washers, and 2 nuts,
fasten the end frames to
the main frame along the
middle.
HAND TIGHTEN.
Long Bolt x 2
Washer x 2
Washer x 2
Nut x 2
5. Bolt Outer 4 Bolts
With 4 short bolts, 8 washers, and 4
nuts, fasten the end frames to the
main frame along the outer edge.
HAND TIGHTEN.
Short Bolt x 4
Washer x 4
Washer x 4
Nut x 4

10
FlipSled™ Rev G
www.TheFlipSled.com
BODY ASSEMBLY
6. Bolt Inner 4 Bolts
With 4 short bolts, 8 washers, and 4
nuts, fasten the end frames to the
main frame in the inside on both ends.
HAND TIGHTEN.
Short Bolt x 4
Washer x 4
Washer x 4
Nut x 4
7. Tighten All Bolts
Tighten all 10 bolts.
8. Install Springs
Store springs on inner posts.
Use springs to secure free weights.
Do not exceed free weight max per pin displayed on your unit.

11
www.TheFlipSled.com
FlipSled™ Rev G
Ski x 4
3/8” Washer x 8
ATTACHMENT COMPONENTS
Sled Receiver Frame x 2
Handle x 4
3/8” x 1” Bolt x 8
3/8” Split Washer x 8
9/16 Wrench x 1
*NEVER DROP OR FLIP ONTO SKIS*

12
FlipSled™ Rev G
www.TheFlipSled.com
ATTACHMENT ASSEMBLY
1. Place Sled Receiver Frame in Main
Helpful Notes
Place the sled receiver frame at
about a 45° angle inside the main
frame.
Assembly may be easier if you
have a socket ratchet handle and
9/16” socket.
Assembly may be easier if two
adults work together to align
parts.
2. Rotate Sled Receiver Frame
Rotate sled receiver and align
with holes in the end frame.
Assembly instrucons use FS300 frame.
All frames have the same assembly process.

13
www.TheFlipSled.com
FlipSled™ Rev G
ATTACHMENT ASSEMBLY
3. Bolt Together
Loosely screw in the bolts, lock washers, and washers to aach
the sled receiver.
When all 4 bolts have been installed on one side, ghten all
bolts.
Repeat for other side.
Bolt x 4
Lock Washer x 4
Washer x 4
4. Install Skis and/or Handles
Pull knob out and drop in accessory. Release handle. Aachment
should be secure.
Aer installing ski’s, GENTLY
roll over.
*NEVER DROP OR FLIP ONTO SKIS*

14
FlipSled™ Rev G
www.TheFlipSled.com
MAINTENANCE AND WARRANTY
Maintenance Schedule
The FlipSled™ is designed to be virtually maintenance-free.
If maintenance is required, please contact manufacturer.
Cleaning
Use a damp cloth to wipe exterior free of device of dust and residue.
Registraon
Complete registraon form at thenisher.com/register to ensure proper warranty
coverage.
Warranty
Who does this warranty cover?
This limited warranty (the “Warranty”) is issued by Airborne Athlecs, Inc. (“Airborne
Athlecs”, “we”, or “us”) to you, a purchaser who purchased a new or factory refurbished
FlipSled™ or new FlipSled™ branded accessories directly from us. The Warranty covers only
you, the original product purchaser. The Warranty cannot be assigned or transferred to any
subsequent purchaser or user and is not available to products that were purchased from any
source other than Airborne Athlecs or an authorized dealer.
What does this warranty cover?
This Warranty covers defects in the product you purchased from an authorized
Airborne Athlecs retailer (the “Product”) as follows. Airborne Athlecs warrants that the
Product is free from defects in materials and workmanship and will, under normal and
intended use, funcon substanally in accordance with our Product documentaon and
technical specicaons. Proof of Product purchase is required as a condion to coverage
under this Warranty.

15
www.TheFlipSled.com
FlipSled™ Rev G
MAINTENANCE AND WARRANTY
Warranty Connued
What is not covered by this warranty?
Regardless of the above, the Warranty does not cover the following:
Normal wear and tear.
Defects or malfuncons experienced during or caused by use not in conformity with
Product documentaon and technical specicaons.
Damage caused by misuse, accident, neglect, abuse, alteraon, improper or unauthorized
modicaon, or tampering.
Damage to your property, home, walls, or oors that may result from installaon or
removal of the Product.
Product that has been resold.
Damage caused by improper or incorrectly performed maintenance or repair.
Damage caused by improper installaon, relocaon, or uninstallaon.
Damage caused during shipping or delivery
Product or Product parts returned without a Return Material Authorizaon (RMA)
number.
What is the warranty period?
The Warranty period begins the date the Product is shipped and lasts for the period
specied below for the applicable Product:
Product Warranty Period
FS-100
FS-200
FS-300
5 year coverage for parts and standard
domesc shipping of said parts. Labor
not included. Rubber parts have a 1
year warranty.
FlipSled™ Accessories 1 year coverage for parts and standard
domesc shipping of said parts. Labor
not included.

16
FlipSled™ Rev G
www.TheFlipSled.com
MAINTENANCE AND WARRANTY
Warranty Connued
How do you submit a claim?
Call 952-873-2633, or email info@theipsled.com to report any Product issues and
open a claim under the Warranty. Our team will reach out to you to aempt to help resolve
your issue.
If your Product has a defect or malfuncon covered by this Warranty, Airborne Athlecs
will repair, replace, or refund the Product at the sole discreon of Airborne Athlecs. If
Airborne Athlecs determines that a Product should be replaced, the replacement may be a
new or a re-manufactured Product. Airborne Athlecs may not return the original Product to
you.
Do not return any Product to Airborne Athlecs without rst receiving a Return
Material Authorizaon (RMA) number and instrucons for how to proceed. Airborne
Athlecs may require you to furnish proof of purchase and/or comply with other
requirements before receiving Warranty service.
What law governs the warranty?
The laws of the State of Minnesota, USA, govern this Warranty, without giving eect to
any conict of laws principles that may provide the applicaon of the law of another
jurisdicon.
AIRBORNE ATHLETICS EXPRESSLY DISCLAIMS ANY AND ALL OTHER WARRANTIES, BOTH
EXPRESS AND IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE.

17
www.TheFlipSled.com
FlipSled™ Rev G
MAINTENANCE AND WARRANTY
Warranty Connued
AIRBORNE ATHLETICS AND ANY THIRD-PARTY SERVICE PROVIDERS OR SUPPLIERS SHALL
NOT BE LIABLE FOR PERFORMANCE DEFICIENCIES CAUSED OR CREATED BY YOU OR OTHERS
YOU ALLOW TO USE THE PRODUCT. AIRBORNE ATHLETICS DOES NOT WARRANT THAT ITS
EQUIPMENT’S PERFORMANCE WILL BE UNINTERRUPTED, ERROR-FREE OR COMPLETELY
SECURE. AIRBORNE ATHLETICS AND ANY THIRD-PARTY PROVIDERS OR SUPPLIERS SHALL
NOT BE LIABLE FOR SERVICE INTERRUPTIONS CAUSED BY FAILURE OF EQUIPMENT, OTHER
SOFTWARE OR SERVICES NOT PROVIDED BY AIRBORNE ATHLETICS OR ITS THIRD-PARTY
PROVIDERS OR SUPPLIERS, OR FAILURE OF COMMUNICATIONS, POWER OUTAGES, OR OTHER
INTERRUPTIONS NOT WITHIN THE COMPLETE CONTROL OF AIRBORNE ATHLETICS OR ITS
PROVIDERS OR SUPPLIERS, EVEN IF AIRBORNE ATHLETICS OR ITS THIRD-PARTY PROVIDERS
OR SUPPLIERS KNOW OR HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS. IN THE
EVENT OF ANY SYSTEM ERROR OR OMISSION, THE SOLE OBLIGATION OF AIRBORNE
ATHLETICS SHALL BE TO PROCESS A CORRECTION OF THE ERROR OR OMISSION AS
REASONABLY NECESSARY.

18
FlipSled™ Rev G
www.TheFlipSled.com
MAINTENANCE AND WARRANTY
Warranty Connued
AIRBORNE ATHLETICS DOES NOT ASSUME ANY LIABILITY FOR ANY SPECIAL, INDIRECT,
INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES OF ANY KIND WHATSOEVER,
INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR REVENUES, LOSS OF DATA, LOSS OF
USE OF THE PRODUCT, COST OF REPLACEMENT OR SUBSTITUTE ITEMS, OR LOSS OF USE
DURING THE PERIOD THAT THE PRODUCT IS BEING REPLACED OR REPAIRED. FURTHER,
AIRBORNE ATHLETICS SHALL NOT BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, INDIRECT, OR PUNITIVE DAMAGES OF ANY KIND WHATSOEVER, EVEN IF
AIRBORNE ATHLETICS HAS BEEN ADVISED AS TO THE POSSIBILITY OF SUCH DAMAGES, FOR
ANY CLAIM ARISING FROM OR RELATED TO THIS WARRANTY STATEMENT, REGARDLESS OF
THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, LOST REVENUE, LOST PROFIT, LOST DATA, OR PRIVACY, OR ANY OTHER CAUSE OF
ACTION OR LEGAL OR EQUITABLE THEORY. IN NO EVENT SHALL AIRBORNE ATHLETICS’S
LIABILITY FOR ANY CLAIM ARISING OUT OF OR RELATED TO THIS WARRANTY EXCEED THE
PRICE PAID BY YOU FOR PURCHASE OF THE PRODUCT, REGARDLESS OF THE FORM OF
ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
LOST REVENUE, LOST PROFIT, LOST DATA, OR PRIVACY, OR ANY OTHER CAUSE OF ACTION OR
LEGAL OR EQUITABLE THEORY.
More Quesons?
If you have quesons, or to begin the service process, please contact us at in-
fo@theipsled.com

19
www.TheFlipSled.com
FlipSled™ Rev G
Online: www.theipsled.com
Fax: [phone]
Phone: [phone]
Email: info@theipsled.com
Mail: 1701 W 94th St, Suite 225
Bloomington, MN 55431
CONTACT INFORMATION
Be Better Everyday™
Follow us on Facebook, Instagram, Twitter, & YouTube