AirTurn MANOS User manual

MANOS
Universal Tablet Holder
QUICK START GUIDE
Note: Do not remove side knobs as the springs will release. They are not user installable.
Screw Manos Mount onto any standard
mic stand thread and rotate so one arm
is up and the other is down.
Lightly loosen side knobs to release
adjustable mount arms. Squeeze open
the clamp on the lower arm and insert
the tablet.
Move the upper arm into place and
clamp the other side of the tablet.
Make sure the pivot feet and clamps are
firmly contacting the tablet. Tighten the
knobs to secure.
Adjust swivel mount base 360° for
optimal viewings.
Loosen pivot knob to adjust tilt.

Screw Manos Mount onto any standard
mic stand thread and rotate so one arm
is up and the other is down.
Lightly loosen side knobs to release
adjustable mount arms. Squeeze open
the clamp on the lower arm and insert
the tablet.
Move the upper arm into place and
clamp the other side of the tablet.
Make sure the pivot feet and clamps are
firmly contacting the tablet. Tighten the
knobs to secure.
Adjust swivel mount base 360° for
optimal viewings.
Loosen pivot knob to adjust tilt.
MANOS
Universal Tablet Holder
Tips and Tricks
• Always insert the tablet into the Manos with one arm down.
• Be sure device is snugly inserted with both clamps engaged and
that the pivot feet are contacting the back of the device.
• Tighten the arm clamps every use for increased security.
• Heavier tablets in portrait mode should have more of the weight
above the mount ngers.
• Return the Manos arms to the vertical position for device removal.
• Loosen the arm clamps for removal.
• Remove the top side rst.
• You can store the Manos at by opening all the way to engage the
storage locks.
Pivot Feet
The pivot feet will function dierently on dierent size devices. For
smaller devices such as phones and smaller tablets, the tablet will
t into the corners of the foot. Larger tablets and tablets with cases,
both edges of the foot will contact the tablet.
Keep Your Case
From smartphones to tablets, the Manos Mount can accommodate
reading devices of all sizes. And keep your cover on – the Manos
Mount can grip your device in or out of any protective case, even
iPads in Otterboxes or Grien Survivor.
Easy In. Easy Out.
The AirTurn Manos Mount locks at for easy transport in your gig
bag. The spring-loaded nger clamps make it a breeze to mount or
remove your device in a ash, and the locking screws make it
simple to ensure the maximum protection for your tablet or smart-
phone.
• Rugged heavy-duty design.
• Holds smartphones and tablets from 5” to 13.3”
with protective covering.
• Proprietary rubber coating on mount ngers for
maximum grip on the widest range of surface
materials and textures.
• Accommodates at and rounded device and cover
surfaces.
• Provides an unobstructed view of your device’s screen,
as well as an uncluttered view from behind.
Warranty
Your AirTurn Manos comes with a one year warranty against
defects in manufacturing. Register for an additional year at
warranty.airturn.com. This warranty does not cover damage
for any thing attached or inserted into the Manos. Please
contact your dealer or AirTurn, Inc. for directions for repair
or replacement.
Important
Be sure to follow directions completely for inserting your
device into the Manos. Check to be sure the pivot foot is
securely contacting the back of your device. Tighten the
knobs of the clamp arms to keep them snugly t to your
device during each use. DO NOT UNSCREW ARM KNOBS ALL
THE WAY!
When mounting heavier tablets, be sure approximately 60%
of the weight is above the Manos arms.
If the contact parts of the Manos become dusty, wipe clean
with a damp cloth. This will insure the integrity of the
natural stickiness for many years.
www.airturn.com
[e-mail] 888-247-1223
Boulder, CO 80301
Made in the U.S.A.