AIRVERSA Purelle User manual
Thank you for choosing Purelle, our latest innovative product
that combines powerful air purification and smart capabilities.
Airversa specializes in creating air treatment products that truly
improve the quality of the air you breathe. A lot of technology
have been built into the Purelle; it works with Apple HomeKit
using Thread technology, the latest future proof wireless protocol
for the smart home. With a thread-enabled Border Router
(HomePod mini or 2021 Apple TV 4K), you can control your Purelle
using your iOS devices anytime, anywhere. Its advanced 3-Stage
True HEPA Filtration system removes 99.97% of airborne
contaminants down to 0.3 microns.
Purelle is optimized for small and midsized rooms such as
bedrooms, living rooms, basements, home gyms, kitchens, offices,
and more. We make it compact and stylish enough to perfectly fit
on a tabletop, and easy enough to move from room to room.
For now, please be sure to explore all of its features outlined in this
manual. If you have any questions, feel free to just drop us an email
anytime. We’d love to assist you to get the most out of it!
Hello!
1
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING.
IF THE POWER CORD OR UNIT DOES NOT WORK, CONTACT
AIRVERSA CUSTOMER SERVICE IMMEDIATELY.
When using electrical products, especially when children are
present, basic safety precautions should always be followed, including
the following:
Check your air purifier cord and plug connections. Faulty wall outlet
connections or loose plugs can cause the outlet or plug to overheat.
Be sure the plug fits tightly in the outlet.
This air purifier is not intended for use in bathroom, laundry areas,
and similar moist indoor locations.
To disconnect the air purifier, first turn controls to the off position,
then remove the plug from outlet.
Use this air purifier only for its intended use as described in this
manual. Any other use not recommended by the manufacturer may
cause fire, electrical shock, or injury to persons.
To effectively clean air, keep windows and doors closed while the air
purifier is on.
This product is intended for household use only.
This product is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
This air purifier is not intended to be used to perseve documents or
in art conservation.
ATTENTION
2
Do not reach for the air purifier that has fallen into water. Unplug it
immediately.
Do not place or store appliance where it can fall or be pulled into
a tub or sink.
Do not place in or drop into water or other liquid.
Do not operate in wet or moist conditions. Keep dry.
Do not touch the air purifier or its power plug with wet hands.
Do not attempt to defeat this safety feature. To do so could result
in an electrical shock hazard.
Do not operate the air purifier with a damaged cord or plug, or
after the air purifier malfunctions, or has been dropped or damaged
in any manner.
Do not run the cord under carpeting.
Do not cover the cord with throw rugs, runners, or similar coverings.
Always unplug the air purifier when not in use for a long time.
Always unplug the air purifier from the electrical outlet immediately
before cleaning or replacing filters.
Always keep the cord away from heated surfaces.
Always place the air purifier on a firm, leveled surface.
Always place the air purifier at least 6 inches away from walls and
3 feet from heat sources such as stoves, radiators, or heaters.
3
MUST DOs
WARNINGS
Do not route cord under furniture or appliances. Arrange the cord
away from traffic areas where it can be tripped over.
Do not tilt or move the air purifier while it is in operation. Shut it
off and remove the plug from the outlet before moving it.
Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electrical shock or fire, or
damage the air purifier.
Do not block air intakes or exhaust in any manner. Do not use on
any soft surface, like a bed, where openings may become blocked.
Do not operate Purelle air purifier without filters.
Do not wash and reuse the filters.
Do not use outdoors.
4
SAVE THESE IMPORTANT INSTRUCTIONS
FOR EASY REFERENCE.
WHAT’S IN THE BOX
1Purelle Smart Air Purifier
2H13 True HEPA Composite Filter Set (Inside Device)
3User Manual
4*Power Adapter
The image shown here is indicative only. If there is inconsistency
between the image and the actual product, the actual product
shall govern.
*
1234
5
Composite
Filter
Base
Air Inlet
Air Inlet
User Manual
Model: AP2
Purelle
Smart Air Purifier
Air Outlet
3-STAGE HEPA H13 AIR FILTRATION
Active
Carbon
Filter
HEPA
Filter Pre-Filter
Filters can’t be cleaned or recycled. After removing a used
filter, wrap it in an airtight plastic bag for disposal. As an extra
precaution, wear gloves when handling a dirty filter.
Please dispose the used filters as combustible rubbish.
Disposing of used filters
Do not wash and reuse the filters.
To purchase replacement filters, please go to:
www.airversa.com
6
For optimal performance, only Airversa filters should
be used with this unit.
SPECIFICATIONS
7
Rated Input Voltage 100-240 V 50/60 Hz
Rated Power 24 W
Standby Power 0.5 W
CADR 130 CFM / 221 m³/h
Noise Level 28 – 53 dB
Optimal Room Size 28 m² or 300 sq. ft.
Working Temperature 4–104 °F / 0 – 40 °C
Typical Filter Life 3000 hrs
Product Weight 2.96 kg
Product Dimension
Model Name AP2
L 8.66 x W 8.66 x H 13.58 in
L 220 x W 220 x H 345 mm
SET UP PURELLE
Remove and put aside the base.
2
Unscrew the knob on the base
according to the directional marks.
1
Take out the new filters (wrapped
in plastic films) from the product.
3
Remove the plastic films on
the filters.
4
Install the filters into the product.
The pull tabs should face inward.
5
Install the base to the product,
tighten the knob according to
directional marks.
6
8
LET’S BEGIN
Once connected to the air purifier, plug
the adapter to a standard AC outlet,
and you will hear a “ding” sound.
1
Tab the power button on the control
panel to turn it on. Meanwhile, the
screen lights up.
2
PM2.5 Value
Air Quality
LED Ring
Real-time
Air Quality Display
Clear Air is on the Way!
9
000-035 Excellent
036-075 Good
076-115 Fair
116-200 Inferior
201-999 Poor
Fan Speed in
Auto Mode
Ring ColorRange Air Quality
HOW TO USE
Control Panel Explained
Auto Mode Button
Tap to turn Auto Mode on/off
When Auto Mode is active, Purelle
uses its built-in PM 2.5 sensor to
adjust the fan speed automatically
based on air quality. For example,
the better the air quality, the lower
the fan speed, or vice versa.
Timer Button
Tap to cycle through timer options
Each increment is 1 hour. The timer
will count down from your selected
time. When the time is finished,
Purelle will turn off. To cancel a
timer, tap the button repeatedly
until the display reads “0”.
10
11
Fan Speed Button
Tap to cycle through fan speeds
Tapping the Fan Speed Button while
the air purifier is in Auto Mode will
exit that mode.
Child Lock
Prevents current settings from
being changed
Press and hold for 5 seconds to turn
Display Lock on/off. The indicator will
blink 3 times along with 2 beeps
when any other button is tapped to
indicate that Display Lock is on.
Filter Status Indicator
Press & Hold to reset filters
Blinks red when the filter should be
checked or replaced.
Press and hold for approx. 5s
to reset the Filter Status Indicator.
Sleep Mode Button
Tap to turn Sleep Mode on/off
Sleep Mode operate quietly by using
a fan speed lower than low speed. It
will turn off the display after 10
seconds if no other buttons are
touched. When the display is turned
off, tap any button to turn the display
back on.
Network Indicator
Indicates pairing status
Product has been paired to the
network > Light stays on
Product has not been paired to the
network > Light will blink and then
turn off after 5 minutes each time
when the product is powered on.
Long press 10s to enter pairing mode.
Filter Life Indicator
Indicates filter consumption
Power Button
Tap to turn Purelle on/off
SMART SETUP
12
Make sure you have an Apple HomePod mini or 2021 Apple TV 4K ready.
Download the Sleekpoint App from
Apple App Store and then open it on
your iOS devices.
2
Long press Network button to enter
pairing mode.
3
4
Add Purelle to the app following
the on-screen instructions.
5
Once setup complete, you may
have access to exclusive features
such as PM2.5 Charts & Reports,
Scheduling, Screen Brightness
Control, etc.
1
Unscrew the knob on the base
according to the directional marks.
Remove and put aside the base.
Pull the tabs to remove the old
filters from the air purifier.
Remove the plastic films on
the new filters.
Install the new filters into the
the air purifier. The pull tabs
should face inward.
Install the base to the air purifier,
tighten the knob according to
directional marks.
21
3 4
5 6
FILTER REPLACEMENT
13
Press and hold the Filter Status
Indicator for approx. 5s to reset
the indicator.
8
Once connected to the air purifer, plug
the adapter to a standard AC outlet,
and you will hear a “ding” sound.
7
CLEANING AND MAINTENANCE
Cleaning the Pre-Filter
It is recommended to vacuum the pre-filter once a month
under normal usage:
1Unplug the air purifier.
2Unscrew the knob on the base according to the directional marks.
3Remove and put aside the base.
4Pull the tabs to remove the filters from the air purifier.
5Vacuum the light-color sides of the filters using the brush
attachment of your vacuum cleaner, cleaning it thoroughly.
6Install the filters back into the air purifier. The tabs should face inward.
7Install the base to the product and tighten the knob according
to directional marks.
8Once connected to air purifier, plug the adapter to a standard AC
outlet, and you will hear a “ding” sound.
9Power on the air purifier, then press and hold the Filter Status
Indicator for approx. 5s to reset the indicator.
14
Vacuum-cleaning the pre-filter help remove large particles
partially and only. It does not extend the filter life.
TROUBLESHOOTING
15
If you need further assistance, please feel free to contact us
Air purifier does
not operate
Not plugged in
Power button
not pressed
No power
The air inlet(s) or outlet
may be blocked
Pre-Filter needs
vacuuming
The filter needs to
be replaced
The filter needs to
be replaced
Air purifier is not level
The Filter Status
indicator needs
to be reset
Plug in the air purifier
Check circuits, fuses,
try a different outlet
Make sure side air inlets
or top air outlet are not
blocked
Vacuum the pre-filter with
the brush attachment of
your vacuum cleaner
Replace the filter
Replace the filter
Place the unit on a flat
and level surface
Press and hold the Filter
Status Indicator for approx.
5s to reset the indicator
Reduced airflow
Reduced odor
removal
Excessive noise
Filter Status indicator
remains lit after
filter replacement
Problem Possible Cause Possible Solution
Press to turn it on
WARRANTY
Sleekpoint Innovations Co., Ltd. (Sleekpoint) warrants this product to
the original purchaser to be free from defects in material and
workmanship, under normal use and conditions, for a period of 1 year
from the date of original purchase.
Sleekpoint agrees, at our option during the warranty period, to repair
any defect in material or workmanship or furnish an equal product in
exchange without charge, subject to verification of the defect or
malfunction and proof of the date of purchase.
There is no other express warranty.
This warranty does not apply:
If the product has been modified from its original condition;
If the product has not been used in accordance with directions
and instructions in the user manual;
To damages or defects caused by accident, abuse, misuse or
improper or inadequate maintenance;
To damages or defects caused by service or repair of the product
performed by an unauthorized service provider or by anyone other
than Airversa;
To damages or defects occurring during commercial use, rental use,
or any use for which the product is not intended;
To damages or defects exceeding the cost of the product.
Sleekpoint will not be liable for indirect, incidental, or consequential
damages in connection with the use of the product covered by
this warranty.
This warranty extends only to the original consumer purchaser of the
product and is not transferable to any subsequent owner of the
product regardless of whether the product is transferred during the
specified term of the warranty.
This warranty does not extend to products purchased from
unauthorized sellers. Sleekpoint’s warranty extends only to products
purchased from authorized sellers that are subject to Sleekpoint’s
quality controls and have agreed to follow its quality controls.
All implied warranties are limited to the period of this limited warranty.
16
If you discover that your product is defective within the specified warranty
dispose of your product before contacting us. Once our Customer Service
Team has approved your request, please return the product with a copy of the
invoice and order ID.
FCC WARNNINGS
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Note: This
equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Warning: Changes or modifications made to this device not expressly
approved by Shenzhen Rundian Innovation Technology Co. Ltd. may
void the FCC authorization to operate this device. Note: The
manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate
the equipment.
Contains FCC ID: 2AA72-PTR9818
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
17
If you have any questions or concerns about your new product,
please feel free to contact our Customer Service Team.
CUSTOMER SUPPORT
www.airversa.com
18
This manual suits for next models
1
Table of contents
Other AIRVERSA Air Cleaner manuals
