AIRVINE WaveTunnel Q4 User manual
WaveTunnel
Installation Guide
Q4
2021
Ceiling Mounting
Bracket
WaveTunnel (WT)
Unit
What’s Included
WaveTunnel Installation Guide
•Screw the bracket into the ceiling before
attaching it to the WaveTunnel™unit
•Mounting hardware will depend on the
type of building material
•Options include acoustic (aka drop),
sheetrock, concrete, wood, etc.
•Once the bracket is in place the
WaveTunnel unit can be attached
•Make sure the bracket is pointed in the
desired direction
•Note: Each WaveTunnel unit weighs 5.3
pounds
Attaching the Bracket to the Ceiling
WaveTunnel Installation Guide
Remove the Rear Cover
WaveTunnel Installation Guide
The WaveTunnel unit is
positioned with the
screw heads lined up
with the keyhole
features in the
mounting bracket.
Attach the WT Unit to the Bracket
WaveTunnel Installation Guide
The WaveTunnel
unit slides
downward to
engage the screw
heads into the
mounting
bracket.
Attach the WT Unit to the Bracket
WaveTunnel Installation Guide
Once the screw heads
have slid all the way
down, the locking
mechanism will engage
and prevent the unit
from inadvertently
being bumped off the
mounting bracket.
Attach the WT Unit to the Bracket
WaveTunnel Installation Guide
Reattach the Rear Cover
WaveTunnel Installation Guide
•Once mounted,
connect the power
and Ethernet cables to
the WaveTunnel unit
•We are now ready to
configure each unit
(see configuration
guide)
Attach Power and Ethernet Cables
WaveTunnel Installation Guide
To remove the
WaveTunnel unit
from the mounting
bracket, simply
release the locking
lever and slide the
unit upwards.
To Remove the WT Unit from the
Bracket
WaveTunnel Installation Guide
Table of contents
