aivituvin AIR 33 User manual

INSTRUCTION
MANUAL
AIR 33
www.aivituvin.com
X

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
01
Do not use this item in a way inconsistent with the manufacturer’
s instructions as this could void the product warranty.

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
45MIN. ASSEMBLY
HARDWARE
P1 P2
P3 P4
02
M3.5x35mm SCREW
M3.0x25mm SCREW
M3.5x40mm SCREW
12PCS+1spare
14PCS+1spare 20PCS+1spare
Plastic Feet
4PCS

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
A B C
D E F
G
1PC
1PC 1PC
03
HI
1PC
1PC
1PC
1PC
1PC
Left panel
Right panel Back panel
Down hutch front panel
1PC Bottom right floor
Upper hutch floor
Upper hutch front panel
Balcony floor
Bottom left floor

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
J K L
M N
1PC
2PCS 1PC
04
2PCS
2PCS Down stair
Upper supporter
Down supporter
Fence
PVC curtain
O
1PC
Upper stair
P
1PC
Back roof
Q
1PC
Front roof
R
1PC
Divider

PRODUCT ASSEMBLY
01
02
05
Attach the supporter Part L & M to the outside of the left panel Part
A by 8xP2.
Screw the curtain Part J to the inside of the front panels Part D &E
by 2xP3 each.
P3X
A
2
P2X
8
E
J
D
J
P3X
2
M
L

PRODUCT ASSEMBLY
03
04
06
Attach the back panel Part C to the side panel Part A & B by
6xP1.
Attach the front upper panel Part E to the side by 4xP1.
P1
X6
A
P1
X4
B
C
E

PRODUCT ASSEMBLY
05
06
07
Attach the front down panel Part D to the side by 4xP1.
Put in the floor Part H & I to the bottom.
I
P1
X4
D
H

PRODUCT ASSEMBLY
07
08
08
Put in the floor Part F & G to the upper layer.
①Put in the divider Part R to close the up and down space.
②If you want a open space, the Part R is useless.
G
R
F

PRODUCT ASSEMBLY
09
10
09
Attach fence Part K by 4xP2.
Screw down the stair Part N & O by 8xP3.
P
2
X4
K
P
3
X8
N
O

PRODUCT ASSEMBLY
11
12
10
Attach the roof panel Part P & Q by 8xP2.
Attach the plastic feet to the leg.
P
2
X8
P
4
X4
P
Q
Finish

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.