Important Safety Instructions
-3-
Introduction
1. Read Instructions
All the safety and operating instructions should be read
before the product is operated.
2. Retain Instructions
The safety and operating instructions should be
retained for future reference.
3. Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.
4. Follow Instructions
All operating instructions should be followed.
5. Cleaning
Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth with a mild detergent for stubborn sticky dirt.
6. Attachments
Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7. Water and Moisture
Do not use this product near water for example, near
a bathtub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and similar.
8. Ventilation
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The
openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface.
9. Power Sources
A product and cart combination should be moved with
care. Quick stop, excessive force, and uneven
surface may cause the product and cart combination
to overturn.
10. Power Cord Protection
Power supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them, paying
particular attention to cords at plugs,
convenience receptacles, and the point where
they exit from the product.
11. Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could
result in a fire or electric shock. Never spill
liquid of any kind on the product.
12. Servicing
Do not attempt to service this product yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
13. Damage Requiring Service
Unplug this product from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
A)When the power-supply cord or plug is
damaged,
B)If liquid has been spilled, or objects have
fallen into the product,
C)If the product has been exposed to rain or
water,
D)If the product does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by the
operating instructions
E)If the product has been dropped or damaged
in any way.
F)When the product exhibits a distinct change in
performance this indicates a need for service.
14. Heat
The product should be situated away from heat
sources such as radiators, stoves, or other
products (including amplifiers) that produce heat.
(Symbol provided by RETAC)
-27-
If you experience problems, before calling the Customer Help Line, please consult the table below for
possible solutions.
Troubleshooting Other
If you are still having difficulty please call the Technical help line. Ring 01422 203676
(Normal rates apply).
Opening hours Mon-Fri 8 am 8pm. Sat 9 am 4pm. Sun 11am 4pm "Bank holidays as Sun"
Symptom Possible Cause Remedy
Dead. No operations. No power tothe player.
Check all connections.
Internal battery maybe exhausted
or not fittedcorrectly.
Mains adaptor notplugged in.
Car adaptor notconnected correctly.
Picture, No sound.
Connections. Check audio leadsare connected
correctly.
Audio settingsincorrect.
If using anexternal amplifier
ensure the settingsin menu are
correct.
Picture freezes or
breaks up.
Disc damage. Inspect the discfor damage and
discard if brokenor cracked.
Dirty disc.
Clean disc carefully, using asoft
cloth. Do notwipe in acircular
motion.
Dirty Laser optic Use a Lasercleaning disc.
Bad disc isdisplayed. See above. See above.
No disc displayed.
No disc inplayer. Place a discin the player.
Disc not incorrectly. Ensure disc iscorrect way up.with
label facing upwards.
No remote control
functions. Exhausted battery. Replace battery.
