LED guide
LED pattern Status Description
Connected to internet Local network and internet
connection with Alarm.com IP.
Local network connection
Local network connection with local
IP address, no internet.
Note: If the LED does not go to a
solid green after a few minutes,
see Camera LED is blinking green.
Power on, or no network
connection
Power on, system booting up
typically 60-90 seconds.
If solid red for longer than 60-90
seconds, then there is no local or
Internet connection.
Firmware update Camera firmware update is in
progress.
Factory reset
The camera is restoring to factory
default settings.
Caution: If the camera is already
installed, it may need to be removed
from the Alarm.com account and re-
added after a factory reset.
To perform a factory reset, press and
hold the reset button for about 10-15
seconds.
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/Indoor_Dome_ADC-V820/Indoor_Dome_(ADC-V820)_-_Installation_Guide
Updated: Wed, 10 Apr 2019 17:47:56 GMT
3
