all33 BackStrong C1 User manual

all33.com

Quantity
Parts
Csters 5
A
Str Bse 1
B
s Lift 1
C
Set Pte 1
D
Set Assemby 1
E
⁄ Bots 4
F
Aen Key 1


Assembly Chir ssemby typicy
tkes round 11 minutes.
1
Place the Star Base (B) upside down and
insert five Casters (A) firmly into the holes
on the Star Base (B).
2
Flip the Star Base (B) over and insert the
Gas Lift (C) through the center hole on top
of the Star Base (B) so that the narrowest
part is at the top.
3
Place the Seat Assembly (E) on
aprotective surface with the bucket
closed. Attach Seat Plate (D) to the bottom
of the Seat Assembly (E) by placing four
¾″ Bolts (F) through the holes of the
SeatPlate (D) and using the Allen Key (G)
to tighten the bolts completely so that the
seat plate and assembly are secure.
REMEMBER TO WORK ON A SOFT, PROTECTIVE SURFACE

4
Place the Seat Assembly (E) with
SeatPlate (D) on top of Gas Lift (C) and
press down until fully engaged.
5
While standing in
front of the chair,
push the back
cushion into an
upright position
until you hear
a“click-lock”
sound confirmation.
Take caution and
avoid pinching
yourfingers.
YOU’RE DONE!
Adjusting for a Perfect Fit and Helpful Videos