SitOnit Seating SECTOR User manual

C6499 Rev. A
Patent-Pending:
www.sitonit.net/patents
SECTOR
ACRYLIC SEATING SCREEN ASSEMBLY
INSTRUCTIONS FOR AVIERA
Now more than ever, our welcoming spaces should be safe—free from contagions,
concern and anything that gets in the way of interacting. This collection of seating screens
provides the privacy, protection and peace of mind you need to wait with condence.

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN
WARNING
TO MINIMIZE RISK OF INJURY:
• Do not sit or stand on brackets
• Use only with provided divider
• Do not use with casters
• Do not use with stools or hip chairs
• Immediately remove from service if you see any damage or loose parts
• Ensure all fasteners are installed properly according to assembly instructions
• Use caution when sitting on or standing up from chair—chair may move
unexpectedly
• Only repair chair using methods and replacement parts approved by the factory
Issues or questions? Please contact:
Customer Experience at [phone]
2
Patent-Pending: www.sitonit.net/patents

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN ASSEMBLY
COMPONENTS
1:1 SCALE
REQUIRED TOOLSCOMPONENT LIST
3
Patent-Pending: www.sitonit.net/patents
• Sector Acrylic Seating Screen (1)
• U-Bracket (4 Halves)
• Gasket (4)
• Mounting Plates (2)
• M6 × 30 mm Screw (2)
• M4 × 6 mm Screw (4)
• #10 × ¾" Screw (8)
• #12 × ¾" Screw (8)
Sector Acrylic
Seating Screen
M4 × 6 mm Screw #12 × ¾" Wood Screw M6 × 30 mm Screw
5 mm Hex L-Key
#2 and #3 Phillips
Screwdriver or Bit
Cordless Drill/Driver
(Do not overtighten screws.)
#10 × ¾" Screw
#10 × ¾" Screws M6 × 30 mm Screws
U-Brackets
(Side A)
U-Brackets
(Side B)
Gaskets
Mounting
Plates
M4 × 6 mm Screws
#12 × ¾" Screws

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN ASSEMBLY
STEPS
4
Patent-Pending: www.sitonit.net/patents
1. Attach one side of the U-bracket (side A) to one mounting plate using two M4 × 6 mm screws
and a #2 Phillips screwdriver. Repeat on the second mounting plate.
2. Apply one gasket to each side of the U-bracket.
3. Slide the B side of the U-brackets onto the A side. Attach the two sides together using
an M6 × 30 mm screw and a 5 mm hex L-key. Do not close. Make sure to leave a gap for
the screen.
1 2
3

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN ASSEMBLY
STEPS
5
Patent-Pending: www.sitonit.net/patents
4
4. Align the mounting plates over the pre-drilled holes in the Aviera frame. Insert two ¾" screws
on each end of both mounting plates, fastening them to the Aviera chair frames. Ensure both
U-brackets are facing the same direction.
For metal frames, use the #10 × ¾"screws and a #2 Phillips screwdriver.
For wood frames, use the #12 × ¾"screws and a #3 Phillips screwdriver.

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN ASSEMBLY
STEPS
6
Patent-Pending: www.sitonit.net/patents
5
5. Insert the screen into the assembled mounts, aligning the back of the screen with the backs
of the chairs. Close the U-brackets by tightening the M6 × 30 mm screws with the 5 mm hex
L-key. Continue until the screen is secure.

C6500 Rev. B
Patent-Pending:
www.sitonit.net/patents
SECTOR
ACRYLIC SEATING SCREEN ASSEMBLY
INSTRUCTIONS FOR FREELANCE
AND FOCUS SIDE
Now more than ever, our welcoming spaces should be safe—free from contagions,
concern and anything that gets in the way of interacting. This collection of seating screens
provides the privacy, protection and peace of mind you need to wait with condence.

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN
WARNING
TO MINIMIZE RISK OF INJURY:
• Do not sit or stand on brackets
• Use only with provided divider
• Do not use with casters
• Do not use with stools or hip chairs
• Immediately remove from service if you see any damage or loose parts
• Ensure all fasteners are installed properly according to assembly instructions
• Use caution when sitting on or standing up from chair—chair may move
unexpectedly
• Only repair chair using methods and replacement parts approved by the factory
Issues or questions? Please contact:
Customer Experience at [phone]
2
Patent-Pending: www.sitonit.net/patents

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN ASSEMBLY
COMPONENTS
1:1 SCALE
REQUIRED TOOLSCOMPONENT LIST
3
Patent-Pending: www.sitonit.net/patents
• Sector Acrylic Seating Screen (1)
• U-Bracket (4 Halves)
• Gasket (4)
• Mounting Tube (2)
• Leg Clamp (4)
• Tube Adapter (2)
• M4 × 6 mm Screw (4)
• M6 × 30 mm Screw (2)
• M8 × 14 mm Screw (4)
• M8 Nut (4)
• M10 × 10 mm Screw (8)
Sector Acrylic
Seating Screen
#2 Phillips
Screwdriver or Bit
5 mm Hex L-Key
(Included)
#2 Phillips
Screwdriver or Bit
Cordless Drill/Driver
(Do not overtighten screws.)
M4 × 6 mm Screw M6 × 30 mm Screw
M10 × 10 mm Screws
Chair Clamps
Tube Adapters
M4 × 6 mm Screws
U-Brackets
(Side A)
U-Brackets
(Side B)
Gaskets
Mounting Tubes
M10 × 10 mm ScrewM8 × 14 mm Screw
M8 × 14 mm Screws
M8 Nut
M8 Nuts
M6 × 30 mm Screws

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN ASSEMBLY
STEPS
4
Patent-Pending: www.sitonit.net/patents
1. Slide one leg clamp onto the front and back leg of both chairs to a height of 12", facing toward
the screen. If glides are too large (preventing installation), open and close clamp onto chair leg.
WARNING: Keep ngers away from the clamp area during installation.
1
1
FOR LARGE GLIDES
12"
12"

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN ASSEMBLY
STEPS
5
Patent-Pending: www.sitonit.net/patents
2. Insert one M8 nut into the hex-shaped slots on each leg clamp. Then, using a 5 mm hex key,
thread one M8 × 14 mm screw through each nut from the opposite side of the clamp.
2

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN ASSEMBLY
STEPS
6
Patent-Pending: www.sitonit.net/patents
34
3. Apply one gasket to each side of the U-brackets.
4. Attach one side of the U-bracket (side A) to one tube adapter using two M4 × 6 mm screws
and a #2 Phillips screwdriver. Repeat for second tube adapter.
Note: The tube adapter is drilled asymmetrically. Check direction against the illustration. Ensure
the edges of the U-bracket are ush with those of the tube adapter.

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN ASSEMBLY
STEPS
7
Patent-Pending: www.sitonit.net/patents
5
5. Slide U-bracket and tube adapter assemblies onto mounting tubes.

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN ASSEMBLY
STEPS
8
Patent-Pending: www.sitonit.net/patents
6. Slide mounting tubes with U-bracket and tube adapter assemblies onto leg clamps. Ensure
both U-brackets are facing the same direction.
Note: For Focus Side models, ensure the shorter mounting tube is placed towards the rear of
the seat.
6

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN ASSEMBLY
STEPS
9
Patent-Pending: www.sitonit.net/patents
7. Thread one M10 × 10 mm screw through each end of both tubes, securing them with the four
leg clamps. Ensure each screw is snug, being careful not to overtighten.
Center the U-bracket and tube adapter assemblies along the mounting tube. Use a level to
ensure both U-brackets are level with each other. Then, using a 5 mm hex L-key, gently tighten
with two M10 × 10 mm screws per U-bracket tube adapter assembly.
7

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN ASSEMBLY
STEPS
10
Patent-Pending: www.sitonit.net/patents
8
8. Slide the B sides of the U-brackets onto the A sides. Attach the two sides together using one
M6 × 30 mm screw per U-bracket assembly and a 5 mm hex L-key. Do not close. Make sure
to leave a gap for the screen.

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
SECTOR ACRYLIC SEATING SCREEN ASSEMBLY
STEPS
11
Patent-Pending: www.sitonit.net/patents
9. Insert the screen into the U-brackets, aligning the back of the screen with the backs of the
chairs. Close the U-brackets by tightening the M6 × 30 mm screws with the 5 mm hex L-key.
Continue until the screen is secure.
9