KUSUDICO KUS02-2005 User manual

Page 1 of 2
Made in South Africa Latest Instructions at www.kusudico.co.za
Urban Designer Table
Product code KUS02/3-2005
Assembly hardware:
8 x Large Screws, 8 x Screw Connectors,
1 x Allen wrench
Components in the box:
1 x Urban Designer Top assembly
4 x Urban Designer Legs
Thank you for purchasing the Urban Designer
Table. This page lists all the contents included
in the box. Please take the time to identify the
hardware as well as the individual components
to this product.
step 2
Place an Urban Designer Leg upside down
in a corner between the two square tubes as
per image. Make sure to align the holes.
step 1
Place the Urban Designer Top Assembly
upside down on a flat solid surface, preferably
a padded or carpeted area to protect the piece
from being scratched.

Page 2 of 2
Made in South Africa Latest Instructions at www.kusudico.co.za
step 3
Make sure the first holes align and then fasten
the Urban Designer Leg to the frame by
using a Large Screw on the outside and a
Screw Connector on the inside.
step 2
Fasten the other 3 x Urban Designer Legs
in the same way.
step 4
Urban Designer Table
Product code KUS02/3-2005
Carefully turn your completed Loft Living
Cafe Table the right side around and place it
in your intended space.
step 5
Make sure the Second holes align and then
fasten the Urban Designer Leg to the frame
by using a Large Screw on the outside and a
Screw Connector on the inside.