Allied Vision Technologies Prosilica GT1290 User manual

Technical Manual
GigE Vision Cameras
V2.3.0
20 March 2015
Allied Vision Technologies GmbH
Taschenweg 2a
D-07646 Stadtroda, Germany
Allied Vision Prosilica GT

Prosilica GT Technical Manual V2.3.0
2
Legal notice
For customers in the U.S.A.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a residential environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interferences will not occur in a particular installation.
If the equipment does cause harmful interference to radio or television reception, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Use a different line outlet for the receiver.
• Consult a radio or TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this manual could
void your authority to operate this equipment. The shielded interface cable recommended in this
manual must be used with this equipment in order to comply with the limits for a computing
device pursuant to Subpart A of Part 15 of FCC Rules.
For customers in Canada
This apparatus complies with the Class A limits for radio noise emissions set out in the Radio Inter-
ference Regulations.
Pour utilisateurs au Canada
Cet appareil est conforme aux normes classe A pour bruits radioélectriques, spécifiées dans le
Règlement sur le brouillage radioélectrique.
Life support applications
These products are not designed for use in life support appliances, devices, or systems where mal-
function of these products can reasonably be expected to result in personal injury. Allied Vision
Technologies customers using or selling these products for use in such applications do so at their
own risk and agree to fully indemnify Allied Vision Technologies for any damages resulting from
such improper use or sale.
Trademarks
Unless stated otherwise, all trademarks appearing in this document of Allied Vision Technologies
are brands protected by law.
Warranty
The information provided by Allied Vision Technologies is supplied without any guarantees or
warranty whatsoever, be it specific or implicit. Also, excluded are all implicit warranties concern-
ing the negotiability, the suitability for specific applications or the non-breaking of laws and pat-
ents. Even if we assume that the information supplied to us is accurate, errors and inaccuracy may
still occur.
Copyright
All texts, pictures and graphics are protected by copyright and other laws protecting intellectual
property. It is not permitted to copy or modify them for trade use or transfer, nor may they be used
on websites.
Allied Vision Technologies GmbH 03/2015
All rights reserved.
Managing Director: Mr. Frank Grube
Tax ID: DE 184383113
Headquarters:
Taschenweg 2a
D-07646 Stadtroda, Germany
Tel: [phone]
Fax: [phone]
e-mail: [email protected]

Prosilica GT Technical Manual V2.3.0
3
Contents
Contacting Allied Vision .................................................................................. 5
Introduction ............................................................................................................ 6
Document history............................................................................................................ 6
Manual conventions......................................................................................................... 9
Precautions.................................................................................................................. 10
Camera cleaning ........................................................................................................... 11
Conformity ..............................................................................................................13
Specifications .......................................................................................................14
Prosilica GT1290/1290C ................................................................................................. 14
Prosilica GT1380/1380C ................................................................................................. 16
Prosilica GT1600/1600C ................................................................................................. 18
Prosilica GT1660/1660C ................................................................................................. 20
Prosilica GT1910/1910C ................................................................................................. 22
Prosilica GT1920/1920C ................................................................................................. 24
Prosilica GT1930L/1930LC .............................................................................................. 26
Prosilica GT2000/2000C/2000NIR .................................................................................... 28
Prosilica GT2050/2050C/2050NIR .................................................................................... 30
Prosilica GT2300/2300C ................................................................................................. 32
Prosilica GT2450/2450C ................................................................................................. 34
Prosilica GT2750/2750C ................................................................................................. 36
Prosilica GT3300/3300C ................................................................................................. 38
Prosilica GT3400/3400C ................................................................................................. 40
Prosilica GT4905/4905C ................................................................................................. 42
Prosilica GT4907/4907C ................................................................................................. 44
Prosilica GT6600/6600C ................................................................................................. 46
Camera smart features ..................................................................................48
Filters ........................................................................................................................49
Camera dimensions ..........................................................................................50
Prosilica GT standard cameras (C-Mount) ........................................................................... 50
Prosilica GT extended cameras ......................................................................................... 51
Prosilica GT large format cameras ..................................................................................... 53
Tripod adapter.............................................................................................................. 55
C-Mount flange focal distance.......................................................................................... 56
F-Mount flange focal distance.......................................................................................... 58
EF-Mount flange focal distance ........................................................................................ 59
Camera interfaces .............................................................................................60
Status LEDs .................................................................................................................. 60
Gigabit Ethernet port ..................................................................................................... 61
Camera I/O connector pin assignment ............................................................................... 62
I/O definition ............................................................................................................... 63

Prosilica GT Technical Manual V2.3.0
4
Lens control................................................................................................................. 66
Camera trigger.....................................................................................................69
Input: Non-isolated and opto-isolated internal circuit.......................................................... 69
Output: Non-isolated internal circuit................................................................................. 70
Output: Opto-isolated internal circuit................................................................................ 70
Trigger timing diagram................................................................................................... 71
Firmware update.................................................................................................73
Resolution and ROI frame rates ...............................................................74
Prosilica GT1290 ........................................................................................................... 75
Prosilica GT1380 ........................................................................................................... 76
Prosilica GT1600 ........................................................................................................... 77
Prosilica GT1660 ........................................................................................................... 78
Prosilica GT1910 ........................................................................................................... 79
Prosilica GT1920 ........................................................................................................... 80
Prosilica GT1930L.......................................................................................................... 81
Prosilica GT2000 ........................................................................................................... 82
Prosilica GT2050 ........................................................................................................... 83
Prosilica GT2300 ........................................................................................................... 84
Prosilica GT2450 ........................................................................................................... 85
Prosilica GT2750 ........................................................................................................... 86
Prosilica GT3300 ........................................................................................................... 87
Prosilica GT3400 ........................................................................................................... 88
Prosilica GT4905 ........................................................................................................... 89
Prosilica GT4907 ........................................................................................................... 90
Prosilica GT6600 ........................................................................................................... 91
Prosilica GT model comparison ........................................................................................ 92
Camera data path...............................................................................................93
Prosilica GT monochrome cameras .................................................................................... 93
Prosilica GT color cameras ............................................................................................... 94
Appendix ..................................................................................................................96
Sensor position accuracy of Prosilica GT standard and extended cameras .................................. 96
Additional references ......................................................................................97
Index...........................................................................................................................98

Prosilica GT Technical Manual V2.3.0
5
Contacting Allied Vision
Contacting Allied Vision
Info

•Technical information:
http://www.alliedvision.com
•Support:
[e-mail]
Allied Vision Technologies GmbH (Headquarters)
Taschenweg 2a
07646 Stadtroda, Germany
Tel.: [phone]
Fax: [phone]
e-mail: [e-mail]
Allied Vision Technologies Canada Inc.
101-3750 North Fraser Way
Burnaby, BC, V5J 5E9, Canada
Tel.: [phone]
Fax: [phone]
e-mail: [e-mail]
Allied Vision Technologies Inc.
38 Washington Street
Newburyport, MA 01950, USA
Toll Free number +1 877-USA-1394
Tel.: [phone]
Fax: [phone]
e-mail: [e-mail]
Allied Vision Technologies Asia Pte. Ltd.
82 Playfair Road
#07-02 D’Lithium
Singapore 368001
Tel.: [phone]
Fax: [phone]
e-mail: [e-mail]
Allied Vision Technologies (Shanghai) Co., Ltd.
2-2109 Hongwell International Plaza
1602# ZhongShanXi Road
Shanghai 200235, China
Tel.: [phone]
Fax: [phone]
e-mail: [e-mail]

Prosilica GT Technical Manual V2.3.0
6
Introduction
Introduction
This Prosilica GT Technical Manual describes in depth the technical specifica-
tions of this camera family including dimensions, feature overview, I/O defini-
tion, trigger timing waveforms, and frame rate performance.
For information on software installation read the GigE Installation Manual. For
detailed information on camera features and controls specific to the Prosilica GT
refer to the GigE Features Reference and GigE Camera and Driver Attributes
documents.
Document history
www

Prosilica GT literature:
http://www.alliedvision.com/en/support/technical-docu-
mentation/prosilica-gt-documentation
Version Date Remarks
V2.0.0 2011-Dec-12 New Manual - RELEASE status
V2.0.1 2012-Mar-08 • Added spectral response curves
• Added GT1910, GT1920, GT2300, GT2750 frame rate charts
V2.0.2 2012-May-31 • Added GT3300, GT1660
V2.0.3 2012- Jun-21 • Added DC Iris information
V2.0.4 2012-Sep-21 • Added GT2000, GT2050, GT6600
• Link added to RS-232 application note
• Added lens control port wiring
• Renamed Camera IO signals
V2.0.5 2013-Jan-14 • Added GT3400, GT4100, GT4905, GT4907
• Updated the circuits diagrams in the Camera trigger section: Figure
50, Figure 52, Figure 53, Figure 54
• Updated the Prosilica GT trigger circuit values: Table 21
• Removed the Supported P-Iris section
• Updated the Exposure control values
V2.0.6 2013-Feb-12 • Added Status LEDs section
• Updated the RoHS directive
to be continued on next page
Table 1: Document history

Prosilica GT Technical Manual V2.3.0
7
Introduction
continued from last page
V2.0.7 2013-May-16 • Updated the bit depth and exposure control camera specifications in
the Specifications chapter
• Updated pixel format naming according to the GenICam naming con-
vention
• Corrected body dimensions and mass for GT3400 on page 40
• Corrected the spectral plots for GT3400 on page 41
• Added VIMBA SDK link in Additional references section
• Added frame rate vs. height graphs for Prosilica GT3400, Prosilica
GT4905, Prosilica GT4907
• Updated frame rate vs. height graphs in Resolution and ROI frame
rates chapter
• Updated AVT recommended cabling to Category 6 or higher in Gigabit
Ethernet port section
V2.0.8 2013-Jul-05 • Added contact information for Allied Vision Technologies (Shanghai)
Co. Ltd.
• Updated spectral plots for GT1910 on page 23
• Updated the links to AVT GigE Installation Manual
•AddedlinkstoAVT GigE Camera and Driver Features document
V2.0.9 2013-Sep-16 • Updated chapter Camera dimensions on page 50
• Updated Lens control section page 66
• Updated Color cameras with IR filter section on page 12
• Updated the specifications for GT2000C and GT2050C on page 28 and
30
• Added a note on the locking screw cables on page 61
• Added optical flange focal distance and maximum lens protrusion
information for C-/F-Mount on page 59
• Added 1 inch lens format recommendation for Prosilica GT2000 cam-
eras on page 28
• Added temperature monitoring information in the Specifications chap-
ter
• Updated specifications for Prosilica GT2000/2000C/2000NIR and Pro-
silica GT2050/2050C/2050NIR cameras
• Added frame rate tables in chapter Resolution and ROI frame rates on
page 74
• Added chapter Appendix on page 96
V2.1.0 2013-Oct-28 • Updated table 20 on page 48
• Added chapter Description of the data path on page 93
•AddedsectionAdjustment of F-Mount on page 58
to be continued on next page
Version Date Remarks
Table 1: Document history

Prosilica GT Technical Manual V2.3.0
8
Introduction
continued from last page
V2.1.1 2014-Jul-14 • Updated frame rate specification for Prosilica GT2000/2000C/
2000NIR, Prosilica GT2050/2050C/2050NIR, Prosilica GT3400/3400C,
and Prosilica GT4905/4905C
• Added defect mask note in Block diagram of Prosilica GT monochrome
cameras with CCD sensors and Block diagram of Prosilica GT color cam-
eras with CCD sensors
• Corrected the sensor and cell size for Prosilica GT6600/6600C
• Added a note on binning in Block diagram of Prosilica GT color cameras
with CCD sensors
• Added link to the technical drawing for GT large format camera with
M42 / M58-Mount on page 54
• Updated section Sensor position accuracy of Prosilica GT standard and
extended cameras
• Updated minimum exposure time for Prosilica GT2000/2000C/2000NIR
and Prosilica GT2050/2050C/2050NIR
• Updated specifications for Prosilica GT4905/4905C
• Updated the power consumption specification in the Specifications
chapter
• Replaced the optical flange focal distance section with the following
sections:
–C-Mount flange focal distance
–F-Mount flange focal distance
• Updated information on Prosilica GT Out 3 / Out 4 trigger circuit on
page 65 and in section Output: Opto-isolated internal circuit
• Updated temperature monitoring information in the Specifications
chapter
• Preliminary camera GT4100 removed from the document until samples
are available
• Updated Camera smart features section
•ReplacedA/D and bit depth with Max image bit depth in the Specifi-
cations chapter
• Added M42-Mount technical drawing links for GT standard and
extended cameras on page 50 and 52, respectively
V2.2.0 2015-Mar-11 • Updated Allied Vision logo
• Changed AVT and Allied Vision Technologies references to Allied Vision
• Updated Additional references section
• Added new camera model GT1930L
–Prosilica GT1930L/1930LC specifications
– Dimensions of GT1930L with EF-Mount (Planarity adjustable)
–Adjustment of EF-Mount information
– Description of data path for GT1930L on page 93 and 95
– EF lens control section on page 68
– Frame rate vs ROI height graph for Prosilica GT1930L
to be continued on next page
Version Date Remarks
Table 1: Document history

Prosilica GT Technical Manual V2.3.0
9
Introduction
Manual conventions
To give this manual an easily understood layout and to emphasize important
information, the following typographical styles and symbols are used:
Styles
continued from last page
V2.2.0
[continued]
2015-Mar-11
[continued]
• Added GT3300 with OnSemi KAI-08051 sensor information in table 15,
figure 25, and figure 26
• Renamed Truesense references to OnSemi
• Updated Table 23: Lens control port wiring
• Updated temperature monitoring specification for Prosilica GT2300/
2300C
• Updated datapath diagrams for color GT cameras in Description of the
data path section
• Updated the defect masking information for the following:
–Prosilica GT monochrome cameras
–Prosilica GT color cameras
V2.3.0 2015-Mar-20 • Replaced old links with new Allied Vision website links
• Changed file name from ‘GigE Camera and Driver Features’ to ‘GigE Fea-
tures Reference’
• Changed chapter name from ‘Description of data path’ to ‘Camera data
path’
Style Function Example
Bold Programs, inputs, or
highlighting important
information
bold
Courier Code listings etc. Input
Upper case Register REGISTER
Italics Modes, fields Mode
Parentheses and/or blue Links (Link)
Table 2: Styles
Version Date Remarks
Table 1: Document history

Prosilica GT Technical Manual V2.3.0
10
Introduction
Symbols
Precautions
Note

This symbol highlights important information.
Caution

This symbol highlights important instructions. You have to fol-
low these instructions to avoid malfunctions.
www

This symbol highlights URLs for further information. The URL
itself is shown in blue.
Example:
http://www.alliedvision.com
Caution

Do not disassemble the camera housing. Warranty is void if
camera has been disassembled.
This camera contains sensitive internal components.
Caution

Keep shipping material.
Poor packaging of the product may cause damage during
shipping.
Caution

Verify all external connections.
Verify all external connections in terms of voltage levels,
power requirements, voltage polarity, and signal integrity
prior to powering the device.
Caution

Cleaning.
This product can be damaged by some volatile cleaning agents.
Avoid cleaning the image sensor unless absolutely necessary.
Please see instructions on optics cleaning in this document.

Prosilica GT Technical Manual V2.3.0
11
Introduction
Camera cleaning
Identifying debris
Debris on the image sensor or optical components appears as a darkened area
or smudge on a camera image. Do not confuse this with a pixel defect which
appears as a distinct point.
Locating debris
First determine whether the debris is on the sensor glass, IR filter (if used), or
lens. The farther away the debris is from the sensor, the blurrier the debris
appears on a camera image.
Stream a live image from the camera using a uniform target, such as a piece of
paper. To determine if the debris is on the camera lens, rotate the lens indepen-
dent of the camera. If the spot moves, the debris is on the lens. Otherwise, the
debris is on the IR filter (if used) or sensor glass.
Caution

Do not exceed environmental specifications.
See environmental specifications limits in the Specifications
section of this document. Special care must be taken to
maintain a reasonable operating temperature. If the camera
is operated in temperatures higher than the specified range,
the camera should be mounted on a heat sink.
For more information on camera body temperature:
http://www.alliedvision.com/fileadmin/content/
documents/products/cameras/various/appnote/
Prosilica_GT_Camera_Body_Temperature.pdf
Caution

Allied Vision does not warranty against any physical damage to
the sensor/filter/protection glass or lenses. Use utmost care
when cleaning optical components.
Caution

Do not touch any optics with fingers. Oil from fingers can
damage fragile optical coatings.

Prosilica GT Technical Manual V2.3.0
12
Introduction
Color cameras with IR filter
Prosilica GT color cameras are equipped with an IR filter. With no lens or lens
cap on a camera, the IR filter is exposed and debris can accumulate on it. This is
the most probable location for debris. It should not be necessary to remove the
IR filter for cleaning. Clean the outside of the IR filter glass using the tech-
niques explained in the next section. If it is determined that the debris is on the
inside surface of the filter glass, or on the sensor glass, IR filter removal is nec-
essary.
Cleaning with air
Blow directly on the contaminated surface with moderate pressure, clean com-
pressed air.
View a live image with the camera after blowing. If debris is still present, repeat
the process until it is determined that the particulate cannot be dislodged. If
this is the case, proceed to the contact cleaning technique.
Contact cleaning
Only use this method if the above air cleaning method does not sufficiently
clean the surface. Use 99% pure isopropyl alcohol and clean cotton swabs. Wet
the swab in the alcohol. Quickly wipe the optics in a single stroke. Prolonged
exposure of alcohol on the swab can cause the swab glue to loosen and transfer
to the optic glass. Do not reuse the same swab. Repeat this process until the
debris is removed. If this process fails to remove the debris, contact Allied
Vision.
Note

• A pin spanner wrench (Allied Vision P/N: E9020001)
suitable for IR filter removal is available for pur-
chase from Allied Vision for all Prosilica GT cameras
except Prosilica GT large format cameras.
•DO NOT attempt to remove the camera IR filter for
Prosilica GT large format cameras. Please contact
[e-mail] for assistance.
Caution

Do not exceed 6 bar (90 psi). If using canned air, approxi-
mately ~ 4.8 bar (70 psi) when full, do not shake or tilt the
can, as extreme changes in temperature due to sudden cold
air can crack the optic glass.

Prosilica GT Technical Manual V2.3.0
13
Conformity
Conformity
Allied Vision Technologies declares under its sole responsibility that all stan-
dard cameras of the Prosilica GT family to which this declaration relates are in
conformity with the following standard(s) or other normative document(s):
• CE, following the provisions of 2004/108/EG directive
(Prosilica GT board level cameras do not have CE)
• FCC Part 15 Class A
(Prosilica GT board level cameras: prepared for FCC Class B)
• RoHS (2011/65/EU)
We declare, under our sole responsibility, that the previously described
Prosilica GT cameras conform to the directives of the CE.
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential environment. This equipment generates radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. Any modifications not expressly
approved in this manual may void your authority to operate this equipment.

Prosilica GT Technical Manual V2.3.0
14
Specifications
Specifications
Prosilica GT1290/1290C
Feature Specification
Resolution 1280 x 960
Sensor Sony ICX445ALA, ICX445AQA for color (with EXview HAD microlens)
Type CCD Progressive
Sensor size Type 1/3
Cell size 3.75 m
Lens mount C (adjustable) / CS
Max frame rate at full resolution 33.3 fps
Max image bit depth Monochrome cameras: 14 bit; Color cameras: 12 bit
On-board FIFO 128 MB, 53 frames at full resolution
Mono formats GT1290: Mono8, Mono12Packed, Mono12, Mono14; GT1290C: Mono8
Color formats BayerRG8, BayerRG12, BayerGR12Packed, RGB8Packed, BGR8Packed,
YUV411Packed, YUV422Packed, YUV444Packed
Exposure control 12 µs to 77.3 s; 1 µs increments
Gain control 0 to 33 dB
Horizontal binning 1 to 8 columns
Vertical binning 1 to 14 rows
TTL I/Os 1 input, 2 outputs
Opto-coupled I/Os 1 input, 2 outputs
RS-232 1 TxD, 1 RxD
Voltage requirements 7–25 VDC, or PoE
Power consumption 2.9 W @ 12 VDC, 3.5 W PoE
Trigger latency 2 µs
Trigger jitter 20 ns
Tpd 30 ns for non-isolated I/O, 70 ns for isolated I/O
Operating temperature -20 to +65 °C ambient temperature (without condensation)
Storage temperature -20 to +70 °C ambient temperature (without condensation)
Operating humidity 20 to 80% non-condensing
Body dimensions (L x W x H) 86 x 53.3 x 33 mm including connectors, w/o tripod and lens
Mass 211 g
Hardware interface standard PoE, IEEE 802.3af 1000BASE-T, 100BASE-TX
Software interface standard GigE Vision Standard 1.2
Regulatory CE, FCC Class A, RoHS (2011/65/EU)
Temperature monitoring Available for camera
Resolution: 0.031; Accuracy: ±1°C
Table 3: Prosilica GT1290/1290C camera specifications

Prosilica GT Technical Manual V2.3.0
15
Specifications
Figure 1: Prosilica GT1290 monochrome spectral response
Figure 2: Prosilica GT1290C color spectral response (without IR cut filter)
0%
10%
20%
30%
40%
50%
400 500 600 700 800 900 1000
Quantum Efficiency
Wavelength [nm]
0%
10%
20%
30%
40%
50%
400 450 500 550 600 650 700
Quantum Efficiency
Wavelength [nm]
Red Green Blue

Prosilica GT Technical Manual V2.3.0
16
Specifications
Prosilica GT1380/1380C
Feature Specification
Resolution 1360 x 1024
Sensor Sony ICX285AL, ICX285AQ for color (with EXview HAD microlens)
Type CCD Progressive
Sensor size Type 2/3
Cell size 6.45 m
Lens mount C (adjustable)
Max frame rate at full resolution 30.5 fps
Max image bit depth Monochrome cameras: 14 bit
Color cameras: 12 bit
On-board FIFO 128 MB
Mono formats GT1380: Mono8, Mono12Packed, Mono12, Mono14
GT1380C: Mono8
Color formats BayerRG8, BayerRG12, BayerGR12Packed, RGB8Packed, BGR8Packed,
YUV411Packed, YUV422Packed, YUV444Packed
Exposure control 10 µs to 77.3 s; 1 µs increments
Gain control 0 to 34 dB
Horizontal binning 1 to 8 columns
Vertical binning 1 to 14 rows
TTL I/Os 1 input, 2 outputs
Opto-coupled I/Os 1 input, 2 outputs
RS-232 1 TxD, 1 RxD
Voltage requirements 7–25 VDC, or PoE
Power consumption 3.4 W @ 12 VDC, 4.2 W PoE
Trigger latency 2.2 µs
Trigger jitter 20 ns
Tpd 30 ns for non-isolated I/O, 70 ns for isolated I/O
Operating temperature -20 to +65 °C ambient temperature (without condensation)
Storage temperature -20 to +70 °C ambient temperature (without condensation)
Operating humidity 20 to 80% non-condensing
Body dimensions (L x W x H) 86 x 53.3 x 33 mm including connectors, w/o tripod and lens
Mass 211 g
Hardware interface standard PoE, IEEE 802.3af 1000BASE-T, 100BASE-TX
Software interface standard GigE Vision Standard 1.2
Regulatory CE, FCC Class A, RoHS (2011/65/EU)
Temperature monitoring Available for camera
Resolution: 0.031; Accuracy: ±1°C
Table 4: Prosilica GT1380/1380C camera specifications

Prosilica GT Technical Manual V2.3.0
17
Specifications
Figure 3: Prosilica GT1380 monochrome spectral response
Figure 4: Prosilica GT1380C color spectral response (without IR cut filter)
0%
10%
20%
30%
40%
50%
400 500 600 700 800 900 1000
Quantum Efficiency
Wavelength [nm]
0%
10%
20%
30%
40%
50%
400 450 500 550 600 650 700
Quantum Efficiency
Wavelength [nm]
Red Green Blue

Prosilica GT Technical Manual V2.3.0
18
Specifications
Prosilica GT1600/1600C
Feature Specification
Resolution 1620 x 1220
Sensor Sony ICX274AL, ICX274AQ for color (with EXview HAD microlens)
Type CCD Progressive
Sensor size Type 1/1.8
Cell size 4.4 m
Lens mount C (adjustable), CS
Max frame rate at full resolution 25.8 fps
Max image bit depth Monochrome cameras: 14 bit
Color cameras: 12 bit
On-board FIFO 128 MB, 33 frames at full resolution
Mono formats GT1600: Mono8, Mono12Packed, Mono12, Mono14
GT1600C: Mono8
Color formats BayerRG8, BayerRG12, BayerGR12Packed, RGB8Packed, BGR8Packed,
YUV411Packed, YUV422Packed, YUV444Packed
Exposure control 10 µs to 68.7 s; 1 µs increments
Gain control 0 to 26 dB
Horizontal binning 1 to 8 columns
Vertical binning 1 to 14 rows
TTL I/Os 1 input, 2 outputs
Opto-coupled I/Os 1 input, 2 outputs
RS-232 1 TxD, 1 RxD
Voltage requirements 7–25 VDC, or PoE
Power consumption 3.3 W @ 12 VDC, 4.0 W PoE
Trigger latency 1.4 µs
Trigger jitter 20 ns
Tpd 30 ns for non-isolated I/O, 70 ns for isolated I/O
Operating temperature -20 to +65 °C ambient temperature (without condensation)
Storage temperature -20 to +70 °C ambient temperature (without condensation)
Operating humidity 20 to 80% non-condensing
Body dimensions (L x W x H) 86 x 53.3 x 33 mm including connectors, w/o tripod and lens
Mass 211 g
Hardware interface standard PoE, IEEE 802.3af 1000BASE-T, 100BASE-TX
Software interface standard GigE Vision Standard 1.2
Regulatory CE, FCC Class A, RoHS (2011/65/EU)
Temperature monitoring Available for both camera and sensor
Resolution: 0.031; Accuracy: ±1°C
Table 5: Prosilica GT1600/1600C camera specifications

Prosilica GT Technical Manual V2.3.0
19
Specifications
Figure 5: Prosilica GT1600 monochrome spectral response
Figure 6: Prosilica GT1600C color spectral response (without IR cut filter)
0%
5%
10%
15%
20%
25%
30%
35%
40%
45%
400 500 600 700 800 900 1000
Quantum Efficiency
Wavelength [nm]
0%
5%
10%
15%
20%
25%
30%
35%
40%
45%
400 450 500 550 600 650 700
Quantum Efficiency
Wavelength [nm]
Red Green Blue

Prosilica GT Technical Manual V2.3.0
20
Specifications
Prosilica GT1660/1660C
Feature Specification
Resolution 1600 x 1200
Sensor OnSemi KAI-02050
Type CCD Progressive
Sensor size Type 2/3
Cell size 5.5 m
Lens mount C (adjustable)
Max frame rate at full resolution 62 fps
Max image bit depth Monochrome cameras: 14 bit
Color cameras: 12 bit
On-board FIFO 128 MB, 68 frames at full resolution
Mono formats GT1660: Mono8, Mono12Packed, Mono12, Mono14
GT1660C: Mono8
Color formats BayerGR8, BayerGR12, BayerGR12Packed, RGB8Packed, BGR8Packed,
RGBA8Packed, BGRA8Packed, YUV411Packed, YUV422Packed
Exposure control 10 µs to 26.8 s; 1 µs increments
Gain control 0 to 32 dB
Horizontal binning 1 to 8 columns
Vertical binning 1 to 8 rows
TTL I/Os 1 input, 2 outputs
Opto-coupled I/Os 1 input, 2 outputs
RS-232 1 TxD, 1 RxD
Voltage requirements 7–25 VDC, or PoE
Power consumption 5.1 W @ 12 VDC, 6.3 W PoE
Trigger latency 2.1 µs
Trigger jitter 20 ns
Tpd 30 ns for non-isolated I/O, 70 ns for isolated I/O
Operating temperature -20 to +60 °C ambient temperature (without condensation)
Storage temperature -20 to +70 °C ambient temperature (without condensation)
Operating humidity 20 to 80% non-condensing
Body dimensions (L x W x H) 92 x 53.3 x 33 mm including connectors, w/o tripod and lens
Mass 224 g
Hardware interface standard PoE, IEEE 802.3af 1000BASE-T, 100BASE-TX
Software interface standard GigE Vision Standard 1.2
Regulatory CE, FCC Class A, RoHS (2011/65/EU)
Temperature monitoring Available for both camera and sensor
Resolution: 0.031; Accuracy: ±1°C
Table 6: Prosilica GT1660/1660C camera specifications