Allstar MAGIC MESH User manual

Magic Mesh®
1
MagicMesh
Bug Zapper
®
Contents
1X Bug Zapper
1X Charging Base
with USB power cord
DANGER: TO REDUCE RISK OF BURNS, ELECTRIC
SHOCK, FIRE, AND PERSONAL INJURY, THIS
PRODUCT MUST BE USED IN ACCORDANCE
WITH THE FOLLOWING INSTRUCTIONS:
1. READ ALL INSTRUCTIONS
2. Keep away from children and animals.
3. The metal mesh surface contains high voltage when powered
on. Do not touch the metal mesh with your hand, or any part of
your body.
4. Do not use this product near amable gas and/or objects.
5. Do not allow and conductive object such as metal to touch the
metal mesh.
6. Do not alter or attempt to repair the product. Doing so can
cause electirc shock
7. Do not use water or wet towels to clean the product. Use dry
bruch to bruch any dirt or particles.
1. If the product was not used for more than 3 months, recharge the
unit to full power.
TIPS
8. Store in a cool dry place with low humidity.
9. Do not insert any objects into the metal mesh. This can cause
the product to get damaged, and cause injury.
2. This product contains a built in low voltage protection feature.
When battery capacity reaches 25% the product will conserve power
and will not turn on. At this time, please recharge the product to full
power.
IM1

Features
E) The product is powered by an 18650
lithium battery with a capacity of 1200mAh.
A) After the electric mosquito swatter is stopped, it has
the function of automatically eliminating the residual
electricity of the metal mesh.
B) The product is equipped with 6 mosquito trapping
purple lights, with selected wavelength is 360-400nm.
C) The grid voltage is around 2500V when working.
D) The product has overcharge, overdischarge, overcur-
rent, and short curcuit protection, etc. to accurately detect
the charging voltage to ensure the safety of charging.
A
BC
D
E
Charging Instructions
NOTE: Charge product 4-6 hours before rst use.
1. When charging, insert the USB plug of the
5V charger into the Micro USB input socket on
the product charging base.
2. Push the power switch to the OFF position,
and place the base of the Magic Mesh ™ bug
zapper into the charging base.
3. The LED’s will start to blink. The power is 25%
when one light is solid, the power is 50% when
two lights are solid, the power is 75% when
three lights are solid, and the product is fully
charged when all four lights are solid.
Standard Handheld Function
1. Push the power switch on the right side of
the product to the ON1 position.
2. Press and hold the high voltage button
switch. The red high voltage will turn on and
the product is ready to use.
3. Once the high voltage button is released,
the high voltage function turns o.
WARNING: There is still residual voltage on the metal mesh after releasing the high voltage button. Do not touch the metal mesh for 10 seconds
after releasing the high voltage button.
Anti Mosquito Function
2. The Magic Mesh ™ bug zapper will glow
blue, and the high voltage will be on constant-
ly without holding down the high voltage
button. WARNING: At this point, do not touch
the metal mesh!
4. Mosquitos and other harmful insects will be
attracted to the UV lights emitting from the
Magic Mesh ™ bug zapper, and will be
exterminated instantly upon contact.
1. Place the base of the Magic Mesh ™ bug
zapper into the charging base, and push the
power switch on the right side of the product
to the ON2 position.
ON2
ON1
OFF
ON2
ON1
OFF
PRESS AND HOLD
“Working” light will
glow red.
RELEASE TO POWER
OFF
ON2
ON1
OFF
BLINK
25%
Charged
50%
Charged
75%
Charged
100%
Charged