Altek Cubic C01 User manual
Model: C01
About the camera Charging the camera / Inserting the memory card
2
3
4
6
7
8
5
11
12
9
10
1
Camera components
1
2
3
4
5
6
7
8
9
10
11
12
Accessories
Installing Cubic Camera application
Camera wrist strap
Micro USB cable
快速使用手冊
型號:C01/C01-CN
TC
Quick Start Guide
Pouch
Warranty card
1
2
Charging the camera
Inserting the memory card
(Mobile phone adapter)
Cubic Camera
EN
SC
Quick Start Guide
Shutter button
Flashlight
Status indicator
Wrist strap hole
Microphone
Zoom button
Tripod thread
Reset button
Power indicator
Power button
Multi-functional slot
Memory card slot
Please make sure the following accessories are included in the package: Please fully charge your camera when using it for the first time. It takes about
3 hours to fully charge the camera.
In case you do not have a mobile phone adapter, you can connect the camera
to a computer for charging. When charging is completed, the indicator stays on.
Please insert a MicroSD/SDHC memory card before
taking any photo.
1
2
Switch off the power before charging.
Connect a mobile phone adapter (5V/1A or above)
with a mobile phone Micro USB cable for charging.
When charging, the power indicator continues to
blink. When charging is completed, the indicator
goes off.
Press the memory card into the slot until it clicks.
Press again to eject.
Please note that any adapter (5V/1A) or
MicroSD memory card are not included in the package.
You are allowed to take 2MP photos even if a memory card is not inserted,
and the photos will be transferred automatically into your smartphone.
Please download and install Cubic Camera application on your smartphone
before using it. If you already have the application installed on your
smartphone, please update it to the latest version.
Android
Search "altek Cubic" in Google Play.
iOS
Search "altek Cubic" in App Store.
Connecting with your smartphone
1
3
Connecting with an Android smartphone
1
2
3
4
Connecting with an iPhone/iPad
2
NFC (Near Field Communication)
Turn on NFC* on your smartphone. Gently touch
the back of your smartphone with Cubic camera
until Cubic Camera application is launched and
the lens protrudes.
Please unlock the screen first. Otherwise,
the connection cannot be established
when the smartphone screen is locked.
*For more information about NFC, please refer
to the phone manual.
Wi-Fi
Switching on the camera.
Launch Cubic Camera application on your
smartphone.
Choose the camera ID** with which you want to
connect.
Switching on the camera.
Choose Settings > Wi-Fi on your iPhone/iPad.
Choose the camera ID** with which you want to connect.
Go back to Home, and launch Cubic Camera application on your
iPhone/iPad.
The actual time needed for connection depends upon the network
environment and the type of smartphone you use.
If the lens remains protruding or does not respond to any operation, please
press the Reset button at the bottom of the camera with a paper clip.
**ID information is specified at the bottom of the camera.
Cubic-XX:XX:XX:XX:XX:XX
Taking photos / Recording videos
Application screen:
1
2
3
4
5
6
12
8
7
11
9
10
Number of shots remaining
Battery level remaining
Viewing photos
Download from Camera
Flashlight control
Settings
Macro mode indicator
Touch-to-shoot indicator
Wireless signal strength indicator
Mode selection
Shutter button
Zoom button
1
2
3
4
5
6
7
8
9
10
11
12
Model: C01
About the camera Charging the camera / Inserting the memory card
2
3
4
6
7
8
5
11
12
9
10
1
Camera components
1
2
3
4
5
6
7
8
9
10
11
12
Accessories
Installing Cubic Camera application
Camera wrist strap
Micro USB cable
快速使用手冊
型號:C01/C01-CN
TC
Quick Start Guide
Pouch
Warranty card
1
2
Charging the camera
Inserting the memory card
(Mobile phone adapter)
Cubic Camera
EN
SC
Quick Start Guide
Shutter button
Flashlight
Status indicator
Wrist strap hole
Microphone
Zoom button
Tripod thread
Reset button
Power indicator
Power button
Multi-functional slot
Memory card slot
Please make sure the following accessories are included in the package: Please fully charge your camera when using it for the first time. It takes about
3 hours to fully charge the camera.
In case you do not have a mobile phone adapter, you can connect the camera
to a computer for charging. When charging is completed, the indicator stays on.
Please insert a MicroSD/SDHC memory card before
taking any photo.
1
2
Switch off the power before charging.
Connect a mobile phone adapter (5V/1A or above)
with a mobile phone Micro USB cable for charging.
When charging, the power indicator continues to
blink. When charging is completed, the indicator
goes off.
Press the memory card into the slot until it clicks.
Press again to eject.
Please note that any adapter (5V/1A) or
MicroSD memory card are not included in the package.
You are allowed to take 2MP photos even if a memory card is not inserted,
and the photos will be transferred automatically into your smartphone.
Please download and install Cubic Camera application on your smartphone
before using it. If you already have the application installed on your
smartphone, please update it to the latest version.
Android
Search "altek Cubic" in Google Play.
iOS
Search "altek Cubic" in App Store.
Connecting with your smartphone
1
3
Connecting with an Android smartphone
1
2
3
4
Connecting with an iPhone/iPad
2
NFC (Near Field Communication)
Turn on NFC* on your smartphone. Gently touch
the back of your smartphone with Cubic camera
until Cubic Camera application is launched and
the lens protrudes.
Please unlock the screen first. Otherwise,
the connection cannot be established
when the smartphone screen is locked.
*For more information about NFC, please refer
to the phone manual.
Wi-Fi
Switching on the camera.
Launch Cubic Camera application on your
smartphone.
Choose the camera ID** with which you want to
connect.
Switching on the camera.
Choose Settings > Wi-Fi on your iPhone/iPad.
Choose the camera ID** with which you want to connect.
Go back to Home, and launch Cubic Camera application on your
iPhone/iPad.
The actual time needed for connection depends upon the network
environment and the type of smartphone you use.
If the lens remains protruding or does not respond to any operation, please
press the Reset button at the bottom of the camera with a paper clip.
**ID information is specified at the bottom of the camera.
Cubic-XX:XX:XX:XX:XX:XX
Taking photos / Recording videos
Application screen:
1
2
3
4
5
6
12
8
7
11
9
10
Number of shots remaining
Battery level remaining
Viewing photos
Download from Camera
Flashlight control
Settings
Macro mode indicator
Touch-to-shoot indicator
Wireless signal strength indicator
Mode selection
Shutter button
Zoom button
1
2
3
4
5
6
7
8
9
10
11
12
Model: C01
About the camera Charging the camera / Inserting the memory card
2
3
4
6
7
8
5
11
12
9
10
1
Camera components
1
2
3
4
5
6
7
8
9
10
11
12
Accessories
Installing Cubic Camera application
Camera wrist strap
Micro USB cable
快速使用手冊
型號:C01/C01-CN
TC
Quick Start Guide
Pouch
Warranty card
1
2
Charging the camera
Inserting the memory card
(Mobile phone adapter)
Cubic Camera
EN
SC
Quick Start Guide
Shutter button
Flashlight
Status indicator
Wrist strap hole
Microphone
Zoom button
Tripod thread
Reset button
Power indicator
Power button
Multi-functional slot
Memory card slot
Please make sure the following accessories are included in the package: Please fully charge your camera when using it for the first time. It takes about
3 hours to fully charge the camera.
In case you do not have a mobile phone adapter, you can connect the camera
to a computer for charging. When charging is completed, the indicator stays on.
Please insert a MicroSD/SDHC memory card before
taking any photo.
1
2
Switch off the power before charging.
Connect a mobile phone adapter (5V/1A or above)
with a mobile phone Micro USB cable for charging.
When charging, the power indicator continues to
blink. When charging is completed, the indicator
goes off.
Press the memory card into the slot until it clicks.
Press again to eject.
Please note that any adapter (5V/1A) or
MicroSD memory card are not included in the package.
You are allowed to take 2MP photos even if a memory card is not inserted,
and the photos will be transferred automatically into your smartphone.
Please download and install Cubic Camera application on your smartphone
before using it. If you already have the application installed on your
smartphone, please update it to the latest version.
Android
Search "altek Cubic" in Google Play.
iOS
Search "altek Cubic" in App Store.
Connecting with your smartphone
1
3
Connecting with an Android smartphone
1
2
3
4
Connecting with an iPhone/iPad
2
NFC (Near Field Communication)
Turn on NFC* on your smartphone. Gently touch
the back of your smartphone with Cubic camera
until Cubic Camera application is launched and
the lens protrudes.
Please unlock the screen first. Otherwise,
the connection cannot be established
when the smartphone screen is locked.
*For more information about NFC, please refer
to the phone manual.
Wi-Fi
Switching on the camera.
Launch Cubic Camera application on your
smartphone.
Choose the camera ID** with which you want to
connect.
Switching on the camera.
Choose Settings > Wi-Fi on your iPhone/iPad.
Choose the camera ID** with which you want to connect.
Go back to Home, and launch Cubic Camera application on your
iPhone/iPad.
The actual time needed for connection depends upon the network
environment and the type of smartphone you use.
If the lens remains protruding or does not respond to any operation, please
press the Reset button at the bottom of the camera with a paper clip.
**ID information is specified at the bottom of the camera.
Cubic-XX:XX:XX:XX:XX:XX
Taking photos / Recording videos
Application screen:
1
2
3
4
5
6
12
8
7
11
9
10
Number of shots remaining
Battery level remaining
Viewing photos
Download from Camera
Flashlight control
Settings
Macro mode indicator
Touch-to-shoot indicator
Wireless signal strength indicator
Mode selection
Shutter button
Zoom button
1
2
3
4
5
6
7
8
9
10
11
12
Model: C01
About the camera Charging the camera / Inserting the memory card
2
3
4
6
7
8
5
11
12
9
10
1
Camera components
1
2
3
4
5
6
7
8
9
10
11
12
Accessories
Installing Cubic Camera application
Camera wrist strap
Micro USB cable
快速使用手冊
型號:C01/C01-CN
TC
Quick Start Guide
Pouch
Warranty card
1
2
Charging the camera
Inserting the memory card
(Mobile phone adapter)
Cubic Camera
EN
SC
Quick Start Guide
Shutter button
Flashlight
Status indicator
Wrist strap hole
Microphone
Zoom button
Tripod thread
Reset button
Power indicator
Power button
Multi-functional slot
Memory card slot
Please make sure the following accessories are included in the package: Please fully charge your camera when using it for the first time. It takes about
3 hours to fully charge the camera.
In case you do not have a mobile phone adapter, you can connect the camera
to a computer for charging. When charging is completed, the indicator stays on.
Please insert a MicroSD/SDHC memory card before
taking any photo.
1
2
Switch off the power before charging.
Connect a mobile phone adapter (5V/1A or above)
with a mobile phone Micro USB cable for charging.
When charging, the power indicator continues to
blink. When charging is completed, the indicator
goes off.
Press the memory card into the slot until it clicks.
Press again to eject.
Please note that any adapter (5V/1A) or
MicroSD memory card are not included in the package.
You are allowed to take 2MP photos even if a memory card is not inserted,
and the photos will be transferred automatically into your smartphone.
Please download and install Cubic Camera application on your smartphone
before using it. If you already have the application installed on your
smartphone, please update it to the latest version.
Android
Search "altek Cubic" in Google Play.
iOS
Search "altek Cubic" in App Store.
Connecting with your smartphone
1
3
Connecting with an Android smartphone
1
2
3
4
Connecting with an iPhone/iPad
2
NFC (Near Field Communication)
Turn on NFC* on your smartphone. Gently touch
the back of your smartphone with Cubic camera
until Cubic Camera application is launched and
the lens protrudes.
Please unlock the screen first. Otherwise,
the connection cannot be established
when the smartphone screen is locked.
*For more information about NFC, please refer
to the phone manual.
Wi-Fi
Switching on the camera.
Launch Cubic Camera application on your
smartphone.
Choose the camera ID** with which you want to
connect.
Switching on the camera.
Choose Settings > Wi-Fi on your iPhone/iPad.
Choose the camera ID** with which you want to connect.
Go back to Home, and launch Cubic Camera application on your
iPhone/iPad.
The actual time needed for connection depends upon the network
environment and the type of smartphone you use.
If the lens remains protruding or does not respond to any operation, please
press the Reset button at the bottom of the camera with a paper clip.
**ID information is specified at the bottom of the camera.
Cubic-XX:XX:XX:XX:XX:XX
Taking photos / Recording videos
Application screen:
1
2
3
4
5
6
12
8
7
11
9
10
Number of shots remaining
Battery level remaining
Viewing photos
Download from Camera
Flashlight control
Settings
Macro mode indicator
Touch-to-shoot indicator
Wireless signal strength indicator
Mode selection
Shutter button
Zoom button
1
2
3
4
5
6
7
8
9
10
11
12
Model: C01
About the camera Charging the camera / Inserting the memory card
2
3
4
6
7
8
5
11
12
9
10
1
Camera components
1
2
3
4
5
6
7
8
9
10
11
12
Accessories
Installing Cubic Camera application
Camera wrist strap
Micro USB cable
快速使用手冊
型號:C01/C01-CN
TC
Quick Start Guide
Pouch
Warranty card
1
2
Charging the camera
Inserting the memory card
(Mobile phone adapter)
Cubic Camera
EN
SC
Quick Start Guide
Shutter button
Flashlight
Status indicator
Wrist strap hole
Microphone
Zoom button
Tripod thread
Reset button
Power indicator
Power button
Multi-functional slot
Memory card slot
Please make sure the following accessories are included in the package: Please fully charge your camera when using it for the first time. It takes about
3 hours to fully charge the camera.
In case you do not have a mobile phone adapter, you can connect the camera
to a computer for charging. When charging is completed, the indicator stays on.
Please insert a MicroSD/SDHC memory card before
taking any photo.
1
2
Switch off the power before charging.
Connect a mobile phone adapter (5V/1A or above)
with a mobile phone Micro USB cable for charging.
When charging, the power indicator continues to
blink. When charging is completed, the indicator
goes off.
Press the memory card into the slot until it clicks.
Press again to eject.
Please note that any adapter (5V/1A) or
MicroSD memory card are not included in the package.
You are allowed to take 2MP photos even if a memory card is not inserted,
and the photos will be transferred automatically into your smartphone.
Please download and install Cubic Camera application on your smartphone
before using it. If you already have the application installed on your
smartphone, please update it to the latest version.
Android
Search "altek Cubic" in Google Play.
iOS
Search "altek Cubic" in App Store.
Connecting with your smartphone
1
3
Connecting with an Android smartphone
1
2
3
4
Connecting with an iPhone/iPad
2
NFC (Near Field Communication)
Turn on NFC* on your smartphone. Gently touch
the back of your smartphone with Cubic camera
until Cubic Camera application is launched and
the lens protrudes.
Please unlock the screen first. Otherwise,
the connection cannot be established
when the smartphone screen is locked.
*For more information about NFC, please refer
to the phone manual.
Wi-Fi
Switching on the camera.
Launch Cubic Camera application on your
smartphone.
Choose the camera ID** with which you want to
connect.
Switching on the camera.
Choose Settings > Wi-Fi on your iPhone/iPad.
Choose the camera ID** with which you want to connect.
Go back to Home, and launch Cubic Camera application on your
iPhone/iPad.
The actual time needed for connection depends upon the network
environment and the type of smartphone you use.
If the lens remains protruding or does not respond to any operation, please
press the Reset button at the bottom of the camera with a paper clip.
**ID information is specified at the bottom of the camera.
Cubic-XX:XX:XX:XX:XX:XX
Taking photos / Recording videos
Application screen:
1
2
3
4
5
6
12
8
7
11
9
10
Number of shots remaining
Battery level remaining
Viewing photos
Download from Camera
Flashlight control
Settings
Macro mode indicator
Touch-to-shoot indicator
Wireless signal strength indicator
Mode selection
Shutter button
Zoom button
1
2
3
4
5
6
7
8
9
10
11
12
Model: C01
About the camera Charging the camera / Inserting the memory card
2
3
4
6
7
8
5
11
12
9
10
1
Camera components
1
2
3
4
5
6
7
8
9
10
11
12
Accessories
Installing Cubic Camera application
Camera wrist strap
Micro USB cable
快速使用手冊
型號:C01/C01-CN
TC
Quick Start Guide
Pouch
Warranty card
1
2
Charging the camera
Inserting the memory card
(Mobile phone adapter)
Cubic Camera
EN
SC
Quick Start Guide
Shutter button
Flashlight
Status indicator
Wrist strap hole
Microphone
Zoom button
Tripod thread
Reset button
Power indicator
Power button
Multi-functional slot
Memory card slot
Please make sure the following accessories are included in the package: Please fully charge your camera when using it for the first time. It takes about
3 hours to fully charge the camera.
In case you do not have a mobile phone adapter, you can connect the camera
to a computer for charging. When charging is completed, the indicator stays on.
Please insert a MicroSD/SDHC memory card before
taking any photo.
1
2
Switch off the power before charging.
Connect a mobile phone adapter (5V/1A or above)
with a mobile phone Micro USB cable for charging.
When charging, the power indicator continues to
blink. When charging is completed, the indicator
goes off.
Press the memory card into the slot until it clicks.
Press again to eject.
Please note that any adapter (5V/1A) or
MicroSD memory card are not included in the package.
You are allowed to take 2MP photos even if a memory card is not inserted,
and the photos will be transferred automatically into your smartphone.
Please download and install Cubic Camera application on your smartphone
before using it. If you already have the application installed on your
smartphone, please update it to the latest version.
Android
Search "altek Cubic" in Google Play.
iOS
Search "altek Cubic" in App Store.
Connecting with your smartphone
1
3
Connecting with an Android smartphone
1
2
3
4
Connecting with an iPhone/iPad
2
NFC (Near Field Communication)
Turn on NFC* on your smartphone. Gently touch
the back of your smartphone with Cubic camera
until Cubic Camera application is launched and
the lens protrudes.
Please unlock the screen first. Otherwise,
the connection cannot be established
when the smartphone screen is locked.
*For more information about NFC, please refer
to the phone manual.
Wi-Fi
Switching on the camera.
Launch Cubic Camera application on your
smartphone.
Choose the camera ID** with which you want to
connect.
Switching on the camera.
Choose Settings > Wi-Fi on your iPhone/iPad.
Choose the camera ID** with which you want to connect.
Go back to Home, and launch Cubic Camera application on your
iPhone/iPad.
The actual time needed for connection depends upon the network
environment and the type of smartphone you use.
If the lens remains protruding or does not respond to any operation, please
press the Reset button at the bottom of the camera with a paper clip.
**ID information is specified at the bottom of the camera.
Cubic-XX:XX:XX:XX:XX:XX
Taking photos / Recording videos
Application screen:
1
2
3
4
5
6
12
8
7
11
9
10
Number of shots remaining
Battery level remaining
Viewing photos
Download from Camera
Flashlight control
Settings
Macro mode indicator
Touch-to-shoot indicator
Wireless signal strength indicator
Mode selection
Shutter button
Zoom button
1
2
3
4
5
6
7
8
9
10
11
12
Taking photos / Recording videos Product specification FCC ID application
Taking photos
1
2
Recording videos
Tap to change the format of videos
1
2
In the shooting mode, the camera takes photos with all settings, except the
flashlight control.
When a photo is taken, the 2MP copy will be transferred automatically into
your smartphone, and the 13MP copy will be saved in the memory card in
the camera.
Before you start to record videos, please change the
shooting mode from photo to video
After the recording is completed, videos categorized as Fast Sharing 1 and
Fast Sharing 2 will be transferred automatically to your smartphone. Full HD
videos are saved in the memory card in the camera.
To obtain more stabilized and perfect images, we suggest you take
photos using the shutter button on the screen.
Launch Cubic Camera application on your smartphone.
Use the shutter button on the screen of your smartphone or on the
camera to take a photo.
Use the shutter button on the screen of your smartphone or on the
camera to record a video.
Press again the button to stop recording.
Downloading photos from the camera / Viewing photos on your smartphone
1
2
4
3
To view high-resolution photos/videos, please use "Download from Camera"
function to download 13MP photos and Full HD videos to your smartphone.
On the application screen, tap "Download from Camera".
The download screen will appear, where users can select photos/videos
to download.
When the selection is completed, tap "Download".
After the download is completed, tap "Exit" to return to the application
screen.
To view photos you have downloaded, tap "View Photos" on the
application screen to access Gallery on your smartphone. Users can also
access Gallery from the main screen of the application to view the photos.
FAQ
1. How do I install Cubic Camera application on my smartphone?
Please make sure that your smartphone provides NFC connectivity:
If NFC is available, please contact the NFC of Cubic Camera with the NFC of
your smartphone to automatically download the application from Google Play.
If NFC is unavailable, please search "altek Cubic" or "Cubic Camera" in Google
Play and install Cubic Camera application.
2. What if I cannot find Cubic Camera application in Google Play?
Cubic Camera application only supports Android 4.0 or above. Please make sure
your operating system is supported.
3. How do I connect Cubic Camera with my smartphone?
Please make sure that your smartphone provides NFC connectivity:
If NFC is available, please contact the NFC of Cubic Camera with the NFC of
your smartphone to switch on the camera and the application for pairing.
If NFC is unavailable, please switch on Cubic Camera and launch Cubic Camera
application for pairing.
4. Why can't Cubic device be found through my smartphone?
Please make sure you have switched on Cubic Camera, and then reopen Cubic
Camera application.
5. Why can't I switch on Cubic Camera/application through NFC?
Please make sure the NFC function has been turned on. When the NFC sign on
the back of Cubic appropriately aligns with your smartphone where the NFC sign
is marked, you may wait for the camera and application to turn on.
6. How do I charge Cubic?
Please use a standard Micro USB cable and a 5V/1A power adapter
(recommended).
7. What is the maximum size of memory card supported by Cubic?
It supports MicroSD cards up to 32GB and Class 2/4/6/8/10.
8. How do I save the data inside Cubic Camera?
You can use your smartphone to download images from Cubic, or you can use
the USB connection to copy images to your computer.
9. Why can I find other Cubic SSID when opening Cubic Camera application?
There are other Cubic Cameras existing in the environment you are in. Please
choose the right SSID according to that specified at the bottom of your Cubic.
10. Can I switch on and use Cubic Camera when charging?
Yes, you can switch on Cubic Camera when you are charging it with a travel or
portable charger.
11. Why can't I use the Internet when my smartphone is connected with Cubic?
The Wi-Fi network will be turned off when you connect Cubic with your
smartphone through Wi-Fi.
12. How do I change the date/time?
The date/time of the camera will be adjusted automatically to the date/time of
your smartphone.
13. Why does the lens of Cubic Camera remain protruding or why doesn't
respond to any operation?
Please press the Reset button with a paper clip to switch off the camera and
reboot it.
About the shooting mode:
Face detection is a default function in the shooting mode.
Users can turn on/off the touch-to-shoot function in the setting menu.
Users can turn on/off the macro function in the setting menu.
About the size of images/videos:
Image resolution:
13MP (4160 X 3120)
Video resolution:
Full HD (16:9): 1920 X 1080
Fast Sharing 1 (4:3): 640 X 480
Fast Sharing 2 (1:1): 640 X 640
About viewing the photos:
Users can choose to view high-resolution images or videos from
"Download from Camera".
Before sharing photos, you have to switch the Wi-Fi hotspot from the
camera to other Internet hotspots.
About switching off the camera:
Press the power button to switch off the camera.
By default, the camera shuts itself off if it does not detect any
operation within the period of 5 minutes. The default period can be
configured in the setting menu.
For more detailed information about Cubic, please refer to the support
website:
http://www.altek.com.tw/cubic/
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/ TV technician for help.
Caution
Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device
is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government.
The exposure standard employs a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted
using standard operating positions accepted by the FCC with the EUT transmitting at the
specified power level in different channels.
The highest SAR value for the device as reported to the SAR value is 1.312W/kg when
placed next to the body.
Size of images/videos Image: 13.2MP
Video: Up to Full HD
Size of photos 2MP (1600×1200)
13MP (4160×3120)
Size of videos 1080/30p (1920×1080)
(length no longer than 29 minutes,
and size within 4GB)
Fast Sharing 1 (4:3 / 640×480)
Fast Sharing 2 (1:1 / 640×640)
Distance of the built-in W: Approx 0.3-1.7m
flashlight (auto ISO) T: Approx 0.5-0.7m
Image sensor 1/3" CMOS
Focal length 30~90mm (3X)
F-number F3.3~5.9
Shutter speed 1/4~1/1600 sec
Maximum capacity for 13MP photos Internal memory: Approx 4 photos
Supported memory card: up to 9600 photos
for 32G
Supported memory card MicroSD/SDHC
Battery capacity Photos: Approx 220 (at 23℃)
Videos: Approx 1 hour and 20 minutes
(at 23℃)
Face detection
Touch to focus
Touch to shoot
Macro mode
Automatically transferring to
the smartphone
Downloading photos from the camera
Micro USB connector
Dimension 52.5X45X26mm
Weight Approx 65g (battery included)
Operating temperature 0~40℃
Operating humidity <90%
Supported mobile operating system Android 4.0 and above, iOS6 and above
Note: The design, specification or information of this product is subject to change
without further notice.
© 2014 altek Corporation. All rights reserved.
More information about Cubic
Video clips
Downloaded files
E xecute Download
Tap a photo
E xecute Delete
Taking photos / Recording videos Product specification FCC ID application
Taking photos
1
2
Recording videos
Tap to change the format of videos
1
2
In the shooting mode, the camera takes photos with all settings, except the
flashlight control.
When a photo is taken, the 2MP copy will be transferred automatically into
your smartphone, and the 13MP copy will be saved in the memory card in
the camera.
Before you start to record videos, please change the
shooting mode from photo to video
After the recording is completed, videos categorized as Fast Sharing 1 and
Fast Sharing 2 will be transferred automatically to your smartphone. Full HD
videos are saved in the memory card in the camera.
To obtain more stabilized and perfect images, we suggest you take
photos using the shutter button on the screen.
Launch Cubic Camera application on your smartphone.
Use the shutter button on the screen of your smartphone or on the
camera to take a photo.
Use the shutter button on the screen of your smartphone or on the
camera to record a video.
Press again the button to stop recording.
Downloading photos from the camera / Viewing photos on your smartphone
1
2
4
3
To view high-resolution photos/videos, please use "Download from Camera"
function to download 13MP photos and Full HD videos to your smartphone.
On the application screen, tap "Download from Camera".
The download screen will appear, where users can select photos/videos
to download.
When the selection is completed, tap "Download".
After the download is completed, tap "Exit" to return to the application
screen.
To view photos you have downloaded, tap "View Photos" on the
application screen to access Gallery on your smartphone. Users can also
access Gallery from the main screen of the application to view the photos.
FAQ
1. How do I install Cubic Camera application on my smartphone?
Please make sure that your smartphone provides NFC connectivity:
If NFC is available, please contact the NFC of Cubic Camera with the NFC of
your smartphone to automatically download the application from Google Play.
If NFC is unavailable, please search "altek Cubic" or "Cubic Camera" in Google
Play and install Cubic Camera application.
2. What if I cannot find Cubic Camera application in Google Play?
Cubic Camera application only supports Android 4.0 or above. Please make sure
your operating system is supported.
3. How do I connect Cubic Camera with my smartphone?
Please make sure that your smartphone provides NFC connectivity:
If NFC is available, please contact the NFC of Cubic Camera with the NFC of
your smartphone to switch on the camera and the application for pairing.
If NFC is unavailable, please switch on Cubic Camera and launch Cubic Camera
application for pairing.
4. Why can't Cubic device be found through my smartphone?
Please make sure you have switched on Cubic Camera, and then reopen Cubic
Camera application.
5. Why can't I switch on Cubic Camera/application through NFC?
Please make sure the NFC function has been turned on. When the NFC sign on
the back of Cubic appropriately aligns with your smartphone where the NFC sign
is marked, you may wait for the camera and application to turn on.
6. How do I charge Cubic?
Please use a standard Micro USB cable and a 5V/1A power adapter
(recommended).
7. What is the maximum size of memory card supported by Cubic?
It supports MicroSD cards up to 32GB and Class 2/4/6/8/10.
8. How do I save the data inside Cubic Camera?
You can use your smartphone to download images from Cubic, or you can use
the USB connection to copy images to your computer.
9. Why can I find other Cubic SSID when opening Cubic Camera application?
There are other Cubic Cameras existing in the environment you are in. Please
choose the right SSID according to that specified at the bottom of your Cubic.
10. Can I switch on and use Cubic Camera when charging?
Yes, you can switch on Cubic Camera when you are charging it with a travel or
portable charger.
11. Why can't I use the Internet when my smartphone is connected with Cubic?
The Wi-Fi network will be turned off when you connect Cubic with your
smartphone through Wi-Fi.
12. How do I change the date/time?
The date/time of the camera will be adjusted automatically to the date/time of
your smartphone.
13. Why does the lens of Cubic Camera remain protruding or why doesn't
respond to any operation?
Please press the Reset button with a paper clip to switch off the camera and
reboot it.
About the shooting mode:
Face detection is a default function in the shooting mode.
Users can turn on/off the touch-to-shoot function in the setting menu.
Users can turn on/off the macro function in the setting menu.
About the size of images/videos:
Image resolution:
13MP (4160 X 3120)
Video resolution:
Full HD (16:9): 1920 X 1080
Fast Sharing 1 (4:3): 640 X 480
Fast Sharing 2 (1:1): 640 X 640
About viewing the photos:
Users can choose to view high-resolution images or videos from
"Download from Camera".
Before sharing photos, you have to switch the Wi-Fi hotspot from the
camera to other Internet hotspots.
About switching off the camera:
Press the power button to switch off the camera.
By default, the camera shuts itself off if it does not detect any
operation within the period of 5 minutes. The default period can be
configured in the setting menu.
For more detailed information about Cubic, please refer to the support
website:
http://www.altek.com.tw/cubic/
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/ TV technician for help.
Caution
Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device
is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government.
The exposure standard employs a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted
using standard operating positions accepted by the FCC with the EUT transmitting at the
specified power level in different channels.
The highest SAR value for the device as reported to the SAR value is 1.312W/kg when
placed next to the body.
Size of images/videos Image: 13.2MP
Video: Up to Full HD
Size of photos 2MP (1600×1200)
13MP (4160×3120)
Size of videos 1080/30p (1920×1080)
(length no longer than 29 minutes,
and size within 4GB)
Fast Sharing 1 (4:3 / 640×480)
Fast Sharing 2 (1:1 / 640×640)
Distance of the built-in W: Approx 0.3-1.7m
flashlight (auto ISO) T: Approx 0.5-0.7m
Image sensor 1/3" CMOS
Focal length 30~90mm (3X)
F-number F3.3~5.9
Shutter speed 1/4~1/1600 sec
Maximum capacity for 13MP photos Internal memory: Approx 4 photos
Supported memory card: up to 9600 photos
for 32G
Supported memory card MicroSD/SDHC
Battery capacity Photos: Approx 220 (at 23℃)
Videos: Approx 1 hour and 20 minutes
(at 23℃)
Face detection
Touch to focus
Touch to shoot
Macro mode
Automatically transferring to
the smartphone
Downloading photos from the camera
Micro USB connector
Dimension 52.5X45X26mm
Weight Approx 65g (battery included)
Operating temperature 0~40℃
Operating humidity <90%
Supported mobile operating system Android 4.0 and above, iOS6 and above
Note: The design, specification or information of this product is subject to change
without further notice.
© 2014 altek Corporation. All rights reserved.
More information about Cubic
Video clips
Downloaded files
E xecute Download
Tap a photo
E xecute Delete
Taking photos / Recording videos Product specification FCC ID application
Taking photos
1
2
Recording videos
Tap to change the format of videos
1
2
In the shooting mode, the camera takes photos with all settings, except the
flashlight control.
When a photo is taken, the 2MP copy will be transferred automatically into
your smartphone, and the 13MP copy will be saved in the memory card in
the camera.
Before you start to record videos, please change the
shooting mode from photo to video
After the recording is completed, videos categorized as Fast Sharing 1 and
Fast Sharing 2 will be transferred automatically to your smartphone. Full HD
videos are saved in the memory card in the camera.
To obtain more stabilized and perfect images, we suggest you take
photos using the shutter button on the screen.
Launch Cubic Camera application on your smartphone.
Use the shutter button on the screen of your smartphone or on the
camera to take a photo.
Use the shutter button on the screen of your smartphone or on the
camera to record a video.
Press again the button to stop recording.
Downloading photos from the camera / Viewing photos on your smartphone
1
2
4
3
To view high-resolution photos/videos, please use "Download from Camera"
function to download 13MP photos and Full HD videos to your smartphone.
On the application screen, tap "Download from Camera".
The download screen will appear, where users can select photos/videos
to download.
When the selection is completed, tap "Download".
After the download is completed, tap "Exit" to return to the application
screen.
To view photos you have downloaded, tap "View Photos" on the
application screen to access Gallery on your smartphone. Users can also
access Gallery from the main screen of the application to view the photos.
FAQ
1. How do I install Cubic Camera application on my smartphone?
Please make sure that your smartphone provides NFC connectivity:
If NFC is available, please contact the NFC of Cubic Camera with the NFC of
your smartphone to automatically download the application from Google Play.
If NFC is unavailable, please search "altek Cubic" or "Cubic Camera" in Google
Play and install Cubic Camera application.
2. What if I cannot find Cubic Camera application in Google Play?
Cubic Camera application only supports Android 4.0 or above. Please make sure
your operating system is supported.
3. How do I connect Cubic Camera with my smartphone?
Please make sure that your smartphone provides NFC connectivity:
If NFC is available, please contact the NFC of Cubic Camera with the NFC of
your smartphone to switch on the camera and the application for pairing.
If NFC is unavailable, please switch on Cubic Camera and launch Cubic Camera
application for pairing.
4. Why can't Cubic device be found through my smartphone?
Please make sure you have switched on Cubic Camera, and then reopen Cubic
Camera application.
5. Why can't I switch on Cubic Camera/application through NFC?
Please make sure the NFC function has been turned on. When the NFC sign on
the back of Cubic appropriately aligns with your smartphone where the NFC sign
is marked, you may wait for the camera and application to turn on.
6. How do I charge Cubic?
Please use a standard Micro USB cable and a 5V/1A power adapter
(recommended).
7. What is the maximum size of memory card supported by Cubic?
It supports MicroSD cards up to 32GB and Class 2/4/6/8/10.
8. How do I save the data inside Cubic Camera?
You can use your smartphone to download images from Cubic, or you can use
the USB connection to copy images to your computer.
9. Why can I find other Cubic SSID when opening Cubic Camera application?
There are other Cubic Cameras existing in the environment you are in. Please
choose the right SSID according to that specified at the bottom of your Cubic.
10. Can I switch on and use Cubic Camera when charging?
Yes, you can switch on Cubic Camera when you are charging it with a travel or
portable charger.
11. Why can't I use the Internet when my smartphone is connected with Cubic?
The Wi-Fi network will be turned off when you connect Cubic with your
smartphone through Wi-Fi.
12. How do I change the date/time?
The date/time of the camera will be adjusted automatically to the date/time of
your smartphone.
13. Why does the lens of Cubic Camera remain protruding or why doesn't
respond to any operation?
Please press the Reset button with a paper clip to switch off the camera and
reboot it.
About the shooting mode:
Face detection is a default function in the shooting mode.
Users can turn on/off the touch-to-shoot function in the setting menu.
Users can turn on/off the macro function in the setting menu.
About the size of images/videos:
Image resolution:
13MP (4160 X 3120)
Video resolution:
Full HD (16:9): 1920 X 1080
Fast Sharing 1 (4:3): 640 X 480
Fast Sharing 2 (1:1): 640 X 640
About viewing the photos:
Users can choose to view high-resolution images or videos from
"Download from Camera".
Before sharing photos, you have to switch the Wi-Fi hotspot from the
camera to other Internet hotspots.
About switching off the camera:
Press the power button to switch off the camera.
By default, the camera shuts itself off if it does not detect any
operation within the period of 5 minutes. The default period can be
configured in the setting menu.
For more detailed information about Cubic, please refer to the support
website:
http://www.altek.com.tw/cubic/
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/ TV technician for help.
Caution
Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device
is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government.
The exposure standard employs a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted
using standard operating positions accepted by the FCC with the EUT transmitting at the
specified power level in different channels.
The highest SAR value for the device as reported to the SAR value is 1.312W/kg when
placed next to the body.
Size of images/videos Image: 13.2MP
Video: Up to Full HD
Size of photos 2MP (1600×1200)
13MP (4160×3120)
Size of videos 1080/30p (1920×1080)
(length no longer than 29 minutes,
and size within 4GB)
Fast Sharing 1 (4:3 / 640×480)
Fast Sharing 2 (1:1 / 640×640)
Distance of the built-in W: Approx 0.3-1.7m
flashlight (auto ISO) T: Approx 0.5-0.7m
Image sensor 1/3" CMOS
Focal length 30~90mm (3X)
F-number F3.3~5.9
Shutter speed 1/4~1/1600 sec
Maximum capacity for 13MP photos Internal memory: Approx 4 photos
Supported memory card: up to 9600 photos
for 32G
Supported memory card MicroSD/SDHC
Battery capacity Photos: Approx 220 (at 23℃)
Videos: Approx 1 hour and 20 minutes
(at 23℃)
Face detection
Touch to focus
Touch to shoot
Macro mode
Automatically transferring to
the smartphone
Downloading photos from the camera
Micro USB connector
Dimension 52.5X45X26mm
Weight Approx 65g (battery included)
Operating temperature 0~40℃
Operating humidity <90%
Supported mobile operating system Android 4.0 and above, iOS6 and above
Note: The design, specification or information of this product is subject to change
without further notice.
© 2014 altek Corporation. All rights reserved.
More information about Cubic
Video clips
Downloaded files
E xecute Download
Tap a photo
E xecute Delete
Taking photos / Recording videos Product specification FCC ID application
Taking photos
1
2
Recording videos
Tap to change the format of videos
1
2
In the shooting mode, the camera takes photos with all settings, except the
flashlight control.
When a photo is taken, the 2MP copy will be transferred automatically into
your smartphone, and the 13MP copy will be saved in the memory card in
the camera.
Before you start to record videos, please change the
shooting mode from photo to video
After the recording is completed, videos categorized as Fast Sharing 1 and
Fast Sharing 2 will be transferred automatically to your smartphone. Full HD
videos are saved in the memory card in the camera.
To obtain more stabilized and perfect images, we suggest you take
photos using the shutter button on the screen.
Launch Cubic Camera application on your smartphone.
Use the shutter button on the screen of your smartphone or on the
camera to take a photo.
Use the shutter button on the screen of your smartphone or on the
camera to record a video.
Press again the button to stop recording.
Downloading photos from the camera / Viewing photos on your smartphone
1
2
4
3
To view high-resolution photos/videos, please use "Download from Camera"
function to download 13MP photos and Full HD videos to your smartphone.
On the application screen, tap "Download from Camera".
The download screen will appear, where users can select photos/videos
to download.
When the selection is completed, tap "Download".
After the download is completed, tap "Exit" to return to the application
screen.
To view photos you have downloaded, tap "View Photos" on the
application screen to access Gallery on your smartphone. Users can also
access Gallery from the main screen of the application to view the photos.
FAQ
1. How do I install Cubic Camera application on my smartphone?
Please make sure that your smartphone provides NFC connectivity:
If NFC is available, please contact the NFC of Cubic Camera with the NFC of
your smartphone to automatically download the application from Google Play.
If NFC is unavailable, please search "altek Cubic" or "Cubic Camera" in Google
Play and install Cubic Camera application.
2. What if I cannot find Cubic Camera application in Google Play?
Cubic Camera application only supports Android 4.0 or above. Please make sure
your operating system is supported.
3. How do I connect Cubic Camera with my smartphone?
Please make sure that your smartphone provides NFC connectivity:
If NFC is available, please contact the NFC of Cubic Camera with the NFC of
your smartphone to switch on the camera and the application for pairing.
If NFC is unavailable, please switch on Cubic Camera and launch Cubic Camera
application for pairing.
4. Why can't Cubic device be found through my smartphone?
Please make sure you have switched on Cubic Camera, and then reopen Cubic
Camera application.
5. Why can't I switch on Cubic Camera/application through NFC?
Please make sure the NFC function has been turned on. When the NFC sign on
the back of Cubic appropriately aligns with your smartphone where the NFC sign
is marked, you may wait for the camera and application to turn on.
6. How do I charge Cubic?
Please use a standard Micro USB cable and a 5V/1A power adapter
(recommended).
7. What is the maximum size of memory card supported by Cubic?
It supports MicroSD cards up to 32GB and Class 2/4/6/8/10.
8. How do I save the data inside Cubic Camera?
You can use your smartphone to download images from Cubic, or you can use
the USB connection to copy images to your computer.
9. Why can I find other Cubic SSID when opening Cubic Camera application?
There are other Cubic Cameras existing in the environment you are in. Please
choose the right SSID according to that specified at the bottom of your Cubic.
10. Can I switch on and use Cubic Camera when charging?
Yes, you can switch on Cubic Camera when you are charging it with a travel or
portable charger.
11. Why can't I use the Internet when my smartphone is connected with Cubic?
The Wi-Fi network will be turned off when you connect Cubic with your
smartphone through Wi-Fi.
12. How do I change the date/time?
The date/time of the camera will be adjusted automatically to the date/time of
your smartphone.
13. Why does the lens of Cubic Camera remain protruding or why doesn't
respond to any operation?
Please press the Reset button with a paper clip to switch off the camera and
reboot it.
About the shooting mode:
Face detection is a default function in the shooting mode.
Users can turn on/off the touch-to-shoot function in the setting menu.
Users can turn on/off the macro function in the setting menu.
About the size of images/videos:
Image resolution:
13MP (4160 X 3120)
Video resolution:
Full HD (16:9): 1920 X 1080
Fast Sharing 1 (4:3): 640 X 480
Fast Sharing 2 (1:1): 640 X 640
About viewing the photos:
Users can choose to view high-resolution images or videos from
"Download from Camera".
Before sharing photos, you have to switch the Wi-Fi hotspot from the
camera to other Internet hotspots.
About switching off the camera:
Press the power button to switch off the camera.
By default, the camera shuts itself off if it does not detect any
operation within the period of 5 minutes. The default period can be
configured in the setting menu.
For more detailed information about Cubic, please refer to the support
website:
http://www.altek.com.tw/cubic/
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/ TV technician for help.
Caution
Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device
is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government.
The exposure standard employs a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted
using standard operating positions accepted by the FCC with the EUT transmitting at the
specified power level in different channels.
The highest SAR value for the device as reported to the SAR value is 1.312W/kg when
placed next to the body.
Size of images/videos Image: 13.2MP
Video: Up to Full HD
Size of photos 2MP (1600×1200)
13MP (4160×3120)
Size of videos 1080/30p (1920×1080)
(length no longer than 29 minutes,
and size within 4GB)
Fast Sharing 1 (4:3 / 640×480)
Fast Sharing 2 (1:1 / 640×640)
Distance of the built-in W: Approx 0.3-1.7m
flashlight (auto ISO) T: Approx 0.5-0.7m
Image sensor 1/3" CMOS
Focal length 30~90mm (3X)
F-number F3.3~5.9
Shutter speed 1/4~1/1600 sec
Maximum capacity for 13MP photos Internal memory: Approx 4 photos
Supported memory card: up to 9600 photos
for 32G
Supported memory card MicroSD/SDHC
Battery capacity Photos: Approx 220 (at 23℃)
Videos: Approx 1 hour and 20 minutes
(at 23℃)
Face detection
Touch to focus
Touch to shoot
Macro mode
Automatically transferring to
the smartphone
Downloading photos from the camera
Micro USB connector
Dimension 52.5X45X26mm
Weight Approx 65g (battery included)
Operating temperature 0~40℃
Operating humidity <90%
Supported mobile operating system Android 4.0 and above, iOS6 and above
Note: The design, specification or information of this product is subject to change
without further notice.
© 2014 altek Corporation. All rights reserved.
More information about Cubic
Video clips
Downloaded files
E xecute Download
Tap a photo
E xecute Delete
Taking photos / Recording videos Product specification FCC ID application
Taking photos
1
2
Recording videos
Tap to change the format of videos
1
2
In the shooting mode, the camera takes photos with all settings, except the
flashlight control.
When a photo is taken, the 2MP copy will be transferred automatically into
your smartphone, and the 13MP copy will be saved in the memory card in
the camera.
Before you start to record videos, please change the
shooting mode from photo to video
After the recording is completed, videos categorized as Fast Sharing 1 and
Fast Sharing 2 will be transferred automatically to your smartphone. Full HD
videos are saved in the memory card in the camera.
To obtain more stabilized and perfect images, we suggest you take
photos using the shutter button on the screen.
Launch Cubic Camera application on your smartphone.
Use the shutter button on the screen of your smartphone or on the
camera to take a photo.
Use the shutter button on the screen of your smartphone or on the
camera to record a video.
Press again the button to stop recording.
Downloading photos from the camera / Viewing photos on your smartphone
1
2
4
3
To view high-resolution photos/videos, please use "Download from Camera"
function to download 13MP photos and Full HD videos to your smartphone.
On the application screen, tap "Download from Camera".
The download screen will appear, where users can select photos/videos
to download.
When the selection is completed, tap "Download".
After the download is completed, tap "Exit" to return to the application
screen.
To view photos you have downloaded, tap "View Photos" on the
application screen to access Gallery on your smartphone. Users can also
access Gallery from the main screen of the application to view the photos.
FAQ
1. How do I install Cubic Camera application on my smartphone?
Please make sure that your smartphone provides NFC connectivity:
If NFC is available, please contact the NFC of Cubic Camera with the NFC of
your smartphone to automatically download the application from Google Play.
If NFC is unavailable, please search "altek Cubic" or "Cubic Camera" in Google
Play and install Cubic Camera application.
2. What if I cannot find Cubic Camera application in Google Play?
Cubic Camera application only supports Android 4.0 or above. Please make sure
your operating system is supported.
3. How do I connect Cubic Camera with my smartphone?
Please make sure that your smartphone provides NFC connectivity:
If NFC is available, please contact the NFC of Cubic Camera with the NFC of
your smartphone to switch on the camera and the application for pairing.
If NFC is unavailable, please switch on Cubic Camera and launch Cubic Camera
application for pairing.
4. Why can't Cubic device be found through my smartphone?
Please make sure you have switched on Cubic Camera, and then reopen Cubic
Camera application.
5. Why can't I switch on Cubic Camera/application through NFC?
Please make sure the NFC function has been turned on. When the NFC sign on
the back of Cubic appropriately aligns with your smartphone where the NFC sign
is marked, you may wait for the camera and application to turn on.
6. How do I charge Cubic?
Please use a standard Micro USB cable and a 5V/1A power adapter
(recommended).
7. What is the maximum size of memory card supported by Cubic?
It supports MicroSD cards up to 32GB and Class 2/4/6/8/10.
8. How do I save the data inside Cubic Camera?
You can use your smartphone to download images from Cubic, or you can use
the USB connection to copy images to your computer.
9. Why can I find other Cubic SSID when opening Cubic Camera application?
There are other Cubic Cameras existing in the environment you are in. Please
choose the right SSID according to that specified at the bottom of your Cubic.
10. Can I switch on and use Cubic Camera when charging?
Yes, you can switch on Cubic Camera when you are charging it with a travel or
portable charger.
11. Why can't I use the Internet when my smartphone is connected with Cubic?
The Wi-Fi network will be turned off when you connect Cubic with your
smartphone through Wi-Fi.
12. How do I change the date/time?
The date/time of the camera will be adjusted automatically to the date/time of
your smartphone.
13. Why does the lens of Cubic Camera remain protruding or why doesn't
respond to any operation?
Please press the Reset button with a paper clip to switch off the camera and
reboot it.
About the shooting mode:
Face detection is a default function in the shooting mode.
Users can turn on/off the touch-to-shoot function in the setting menu.
Users can turn on/off the macro function in the setting menu.
About the size of images/videos:
Image resolution:
13MP (4160 X 3120)
Video resolution:
Full HD (16:9): 1920 X 1080
Fast Sharing 1 (4:3): 640 X 480
Fast Sharing 2 (1:1): 640 X 640
About viewing the photos:
Users can choose to view high-resolution images or videos from
"Download from Camera".
Before sharing photos, you have to switch the Wi-Fi hotspot from the
camera to other Internet hotspots.
About switching off the camera:
Press the power button to switch off the camera.
By default, the camera shuts itself off if it does not detect any
operation within the period of 5 minutes. The default period can be
configured in the setting menu.
For more detailed information about Cubic, please refer to the support
website:
http://www.altek.com.tw/cubic/
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/ TV technician for help.
Caution
Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device
is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government.
The exposure standard employs a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted
using standard operating positions accepted by the FCC with the EUT transmitting at the
specified power level in different channels.
The highest SAR value for the device as reported to the SAR value is 1.312W/kg when
placed next to the body.
Size of images/videos Image: 13.2MP
Video: Up to Full HD
Size of photos 2MP (1600×1200)
13MP (4160×3120)
Size of videos 1080/30p (1920×1080)
(length no longer than 29 minutes,
and size within 4GB)
Fast Sharing 1 (4:3 / 640×480)
Fast Sharing 2 (1:1 / 640×640)
Distance of the built-in W: Approx 0.3-1.7m
flashlight (auto ISO) T: Approx 0.5-0.7m
Image sensor 1/3" CMOS
Focal length 30~90mm (3X)
F-number F3.3~5.9
Shutter speed 1/4~1/1600 sec
Maximum capacity for 13MP photos Internal memory: Approx 4 photos
Supported memory card: up to 9600 photos
for 32G
Supported memory card MicroSD/SDHC
Battery capacity Photos: Approx 220 (at 23℃)
Videos: Approx 1 hour and 20 minutes
(at 23℃)
Face detection
Touch to focus
Touch to shoot
Macro mode
Automatically transferring to
the smartphone
Downloading photos from the camera
Micro USB connector
Dimension 52.5X45X26mm
Weight Approx 65g (battery included)
Operating temperature 0~40℃
Operating humidity <90%
Supported mobile operating system Android 4.0 and above, iOS6 and above
Note: The design, specification or information of this product is subject to change
without further notice.
© 2014 altek Corporation. All rights reserved.
More information about Cubic
Video clips
Downloaded files
E xecute Download
Tap a photo
E xecute Delete
Taking photos / Recording videos Product specification FCC ID application
Taking photos
1
2
Recording videos
Tap to change the format of videos
1
2
In the shooting mode, the camera takes photos with all settings, except the
flashlight control.
When a photo is taken, the 2MP copy will be transferred automatically into
your smartphone, and the 13MP copy will be saved in the memory card in
the camera.
Before you start to record videos, please change the
shooting mode from photo to video
After the recording is completed, videos categorized as Fast Sharing 1 and
Fast Sharing 2 will be transferred automatically to your smartphone. Full HD
videos are saved in the memory card in the camera.
To obtain more stabilized and perfect images, we suggest you take
photos using the shutter button on the screen.
Launch Cubic Camera application on your smartphone.
Use the shutter button on the screen of your smartphone or on the
camera to take a photo.
Use the shutter button on the screen of your smartphone or on the
camera to record a video.
Press again the button to stop recording.
Downloading photos from the camera / Viewing photos on your smartphone
1
2
4
3
To view high-resolution photos/videos, please use "Download from Camera"
function to download 13MP photos and Full HD videos to your smartphone.
On the application screen, tap "Download from Camera".
The download screen will appear, where users can select photos/videos
to download.
When the selection is completed, tap "Download".
After the download is completed, tap "Exit" to return to the application
screen.
To view photos you have downloaded, tap "View Photos" on the
application screen to access Gallery on your smartphone. Users can also
access Gallery from the main screen of the application to view the photos.
FAQ
1. How do I install Cubic Camera application on my smartphone?
Please make sure that your smartphone provides NFC connectivity:
If NFC is available, please contact the NFC of Cubic Camera with the NFC of
your smartphone to automatically download the application from Google Play.
If NFC is unavailable, please search "altek Cubic" or "Cubic Camera" in Google
Play and install Cubic Camera application.
2. What if I cannot find Cubic Camera application in Google Play?
Cubic Camera application only supports Android 4.0 or above. Please make sure
your operating system is supported.
3. How do I connect Cubic Camera with my smartphone?
Please make sure that your smartphone provides NFC connectivity:
If NFC is available, please contact the NFC of Cubic Camera with the NFC of
your smartphone to switch on the camera and the application for pairing.
If NFC is unavailable, please switch on Cubic Camera and launch Cubic Camera
application for pairing.
4. Why can't Cubic device be found through my smartphone?
Please make sure you have switched on Cubic Camera, and then reopen Cubic
Camera application.
5. Why can't I switch on Cubic Camera/application through NFC?
Please make sure the NFC function has been turned on. When the NFC sign on
the back of Cubic appropriately aligns with your smartphone where the NFC sign
is marked, you may wait for the camera and application to turn on.
6. How do I charge Cubic?
Please use a standard Micro USB cable and a 5V/1A power adapter
(recommended).
7. What is the maximum size of memory card supported by Cubic?
It supports MicroSD cards up to 32GB and Class 2/4/6/8/10.
8. How do I save the data inside Cubic Camera?
You can use your smartphone to download images from Cubic, or you can use
the USB connection to copy images to your computer.
9. Why can I find other Cubic SSID when opening Cubic Camera application?
There are other Cubic Cameras existing in the environment you are in. Please
choose the right SSID according to that specified at the bottom of your Cubic.
10. Can I switch on and use Cubic Camera when charging?
Yes, you can switch on Cubic Camera when you are charging it with a travel or
portable charger.
11. Why can't I use the Internet when my smartphone is connected with Cubic?
The Wi-Fi network will be turned off when you connect Cubic with your
smartphone through Wi-Fi.
12. How do I change the date/time?
The date/time of the camera will be adjusted automatically to the date/time of
your smartphone.
13. Why does the lens of Cubic Camera remain protruding or why doesn't
respond to any operation?
Please press the Reset button with a paper clip to switch off the camera and
reboot it.
About the shooting mode:
Face detection is a default function in the shooting mode.
Users can turn on/off the touch-to-shoot function in the setting menu.
Users can turn on/off the macro function in the setting menu.
About the size of images/videos:
Image resolution:
13MP (4160 X 3120)
Video resolution:
Full HD (16:9): 1920 X 1080
Fast Sharing 1 (4:3): 640 X 480
Fast Sharing 2 (1:1): 640 X 640
About viewing the photos:
Users can choose to view high-resolution images or videos from
"Download from Camera".
Before sharing photos, you have to switch the Wi-Fi hotspot from the
camera to other Internet hotspots.
About switching off the camera:
Press the power button to switch off the camera.
By default, the camera shuts itself off if it does not detect any
operation within the period of 5 minutes. The default period can be
configured in the setting menu.
For more detailed information about Cubic, please refer to the support
website:
http://www.altek.com.tw/cubic/
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/ TV technician for help.
Caution
Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device
is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government.
The exposure standard employs a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted
using standard operating positions accepted by the FCC with the EUT transmitting at the
specified power level in different channels.
The highest SAR value for the device as reported to the SAR value is 1.312W/kg when
placed next to the body.
Size of images/videos Image: 13.2MP
Video: Up to Full HD
Size of photos 2MP (1600×1200)
13MP (4160×3120)
Size of videos 1080/30p (1920×1080)
(length no longer than 29 minutes,
and size within 4GB)
Fast Sharing 1 (4:3 / 640×480)
Fast Sharing 2 (1:1 / 640×640)
Distance of the built-in W: Approx 0.3-1.7m
flashlight (auto ISO) T: Approx 0.5-0.7m
Image sensor 1/3" CMOS
Focal length 30~90mm (3X)
F-number F3.3~5.9
Shutter speed 1/4~1/1600 sec
Maximum capacity for 13MP photos Internal memory: Approx 4 photos
Supported memory card: up to 9600 photos
for 32G
Supported memory card MicroSD/SDHC
Battery capacity Photos: Approx 220 (at 23℃)
Videos: Approx 1 hour and 20 minutes
(at 23℃)
Face detection
Touch to focus
Touch to shoot
Macro mode
Automatically transferring to
the smartphone
Downloading photos from the camera
Micro USB connector
Dimension 52.5X45X26mm
Weight Approx 65g (battery included)
Operating temperature 0~40℃
Operating humidity <90%
Supported mobile operating system Android 4.0 and above, iOS6 and above
Note: The design, specification or information of this product is subject to change
without further notice.
© 2014 altek Corporation. All rights reserved.
More information about Cubic
Video clips
Downloaded files
E xecute Download
Tap a photo
E xecute Delete
Table of contents
