Alvanon AlvaForm Soft Series User manual

ALVAFORM SOFT SERIES
CARE MANUAL
( v1.1 )
FOR SOFTFORMS
The soft AlvaForm is made from soft memory foam and proper care is required to keep the AlvaForm in good condition.
Step 1
The Soft AlvaForm is covered
with a layer of cotton weave and
has the possibility of snagging.
Please use the form with care and
make sure not to force garments
on and off the form.
Step 2
Please keep the Soft AlvaForm in a dry and
cool environment. Avoid placing the form
outdoors or under the sun for long periods
as this may cause the memory foam to
deform.
Step 3
If any water or other liquid is spilt on the
AlvaForm, use a dry cloth to wipe the
affected area immediately and leave it
to dry. Please do not use any washing
detergent or bleach on the form.
Step 4
If the interlining is starting to come off from the foam, apply a damp cloth on the affected area.
Then use an iron to dry and flatten the fabric till the creases disappear ( the temperature of
the iron is recommended to be set at ‘COTTON’ use).
Step 5
Do not lean the form against the wall or lay the form on the
ground for long periods. This may cause shape of the
memory foam to deform.
1 / 2

2 / 2
WRINKLE ON THE MOTION ARM AND HOW TO FIX IT
Step 1
After a long period of use, wrinkles
may begin to appear on the motion
arm.
Step 2
To fix the problem of the wrinkle,
brush some water at the elbow.
Step 3
Iron the wet area until it is dry.
The temperature of the iron
is recommended to be set at
‘COTTON’ use.
Step 4
The fabric of the motion arm will
become smooth after ironing.