Alvanon AlvaForm Instruction sheet

HOW TO INSTALL
THE HALF FORM STAND
COMPONENTS IN THE PACKAGE
( v1.0 )
Main Pole
INSTALLATION
Step 1
Cut and open the end of the plastic wrap on the
main pole and remove the plastic cover from
bottom tip.
Step 2
Install the main pole onto the base stand.
•Release two locking knobs from the base stand.
•Insert the bottom tip of the pole into the hole of the base stand.
1 / 2
Base Stand
Step 3
Install the half form into the stand pole.
Step 4
Hold the bottom part of aluminum pole and
turn the half form until the half form is locked
firmly into the stand.
CAUTION
Remember to fully insert the pole below the
grey painted area.
• Tighten two locking knobs.
• Dispose the plastic wrap on the main pole.

2 / 2
Release the two wheel locks
and rotate the form by moving
the base stand.
Step on the pedal to unlock the
pole while rotating the form.
CAUTION
Do not step on the pedal before installing the
mannequin in order to prevent the user from
being injured by the sudden rise of the pole.
CAUTION
Do not rotate the form without releasing the
wheel locks or stepping on the pedal. The
pole will break and lose the locking function if
the form is rotated without unlocking the pole.
APPLICATIONS
Press down on front brake to lock the
wheel in place.
Hold the mannequin with both hands
while lifting up / lowering down the
mannequin by stepping on the pedal.
METHOD 1 METHOD 2