Alvin Mobile Step-Design File Tube Rack WSF36 User manual

Assembly Instructions for
Mobile Step-Design File Tube Rack
No. WSF36
Key Qty. Description
Key Qty. Description
A 2 Large Side Grids
B 1 Back Grid
A 2 Large Side Grids
B 1 Back Grid
A 2 Large Side Grids
C 2 Center Grids
D 1 Front Grid
E 1 Bottom Step
F 4 Casters
E 1 Bottom Step
F 4 Casters
E 1 Bottom Step
G 1 Bag Small Clips
H 1 Bag Large Clips
G 1 Bag Small Clips
H 1 Bag Large Clips
G 1 Bag Small Clips
CONTENTS
NOTE:
Plastic clips can be snapped on and removed easily by
hand. Most grid sections require only 2 clips per side
for support. For safety, clips attached on exterior of cart
should be positioned with flanges facing inward.
(See reverse side for assembly)
CLIP ATTACHMENT
E
F
G
TAIWAN
Mobile Step-Design File Tube Rack
B
A
C
D
&
H

Alvin & Company, Inc. Bloomfield, CT Grand Prairie, TX Rancho Cordova, CA
4. Attach front grid (D) to side grids (A).
Using small clips, attach grid (C) to
grids (A).
1. Attach casters (F) to each
of the large size grids (A).
5. Attach extra clips where needed.
2. Using large plastic clips, attach
one large grid (A) to the back grid
(B), then attach the other large grid
(A) to the other side of grid (B).
Attach center grid (C) to bottom.
3. Drop in bottom step base (E).
Assembly Instructions
for No. WSF36
(cont.)
A98000 06/98