ALZA NV5100 User manual

NV5100
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –18
Čeština
19 –35
Slovenčina
36 –51
Magyar
52 –68
Deutsch
69 –86

3
Dear customer,
Thank you for purchasing our product. Please read the following
instructions carefully before first use and keep this user manual for
future reference. Pay particular attention to the safety instructions. If
you have any questions or comments about the device, please contact
the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz

4
Intended Use
This device is intended only for recording digital photos and videos,
particularly for observing wildlife. It is not intended for any other use or
for uses extending beyond those stated. This device is not intended for
use in commercial or industrial environments.
The manufacturer accepts no responsibility for damage caused by
failure to observe these instructions, improper use, incompetent
repairs, making unauthorized modifications or for using unapproved
replacement parts. The operator alone bears liability.
WARNING
Do not use the product in violation of local laws and regulations. A user
who violates local laws and ordinances will be held responsible for all
consequences of purchasing and using the product.
Alza.cz a.s. is not responsible for any violation of local laws and
regulations by the user.
When the equipment will be placed in the outdoor filming, rapid
changes in the weather could lead to error record.

5
Product Overview
1. Power Button
2. IR Up /Zoom in / Up Button
3. IR Down/ Zoom out /
Down Button
4. Strap Hole
5. Shot Button
6. Menu Button
7. Mode Button
8. IR LEDs
9. Lens
10. Focus wheel
11. Battery Cover
12. View Area /display screen
13. USB port/Micro SD card slot Cover

6
Specification
Photo Resolution
3M(2048x1536)】/2M(1600x12/
【1M(1280x960)】/【VGA(640x480)】
Video Resolution
【1080P(1920x1080P@30FPS )】/
【960P (1280 x 960 @30FPS )】/
【VGA(640x480@30FPS )】
Lens
F1.0 larger aperture, f=35mm, Auto IR filter
Lens Angle
10.3°
Display Screen
Inner screen is 2.5” 640*480 TFT
Outer screen
98x48mm,with 6X large window magnifier
Storage Media
Micro SD card, up to 32GB
USB Port
Micro USB 2.0
Auto off
3 min/ 5 min/ 10 min/OFF
IR LED
5W,850nm strong infrared spotlight ,7 grades
infrared adjustment
Display brightness
7 grades adjustable
View Distance In
Complete
Darkness
About350-400 meters
View Distance In
Low Light
1 meters～infinity
Digital Zoom
Digital Zoom 4X
Power Source
8 * 2AA Alkaline battery, External 5V mobile
power supply
OSD Language
Multiple languages are optional
Date Stamps
Support to set date and time. Date and time
stamp on photo and video files
Operation
Buttons
6 buttons
Operation
Temperature
-10°C to +50°C

7
Storage
Temperature
-20°C to +60°C
Dimensions
approx. 196.3*144.6*61.5mm
Weight
about 795g with battery
Install Batteries
•Please install batteries into the device before using.
•Open the battery cover on the back of device.
•Insert 8 x 1.5V AA brand Alkaline batteries into the battery
compartment. Make sure the polarity is correct.
•Close the battery cover.
Inserting Memory Card
Please prepare a Class 10 Micro card (up to 32GB) in advance.
•Open the card slot cover, you will see the card slot.
•Insert the Micro SD card into the slot. Make sure the direction
is right. Never insert the card forcibly.
•Format the Micro SD card,this can improve the compatibility of
Micro SD card.
•To remove the card from the memory card slot of the device,
press the edge of the memory card in gently, the card will pop
out. Then remove the card.
Note:If the TF card is not inserted or the card is not inserted correctly,
the prompt icon of SD card and the number of photos or recording time
will not appear on the screen when the machine is turned on. When
pressing the shoot button, the prompt of "No card" will appear.

8
Basic operation
Turn On And Turn Off
Long press the POWER button for 3 seconds to turn on the device. Long
press the POWER button to turn off the device.
Watch the eyepiece / display screen and adjust the focus wheel
according to the actual distance to focus until the screen is clear. If the
light is insufficient or used in the evening, turn on the IR by pressing the
IR Up/Zoom in/Up Button.Increase the brightness by pressing the
button repeatedly.It has 7 levels of brightness (0〉1〉2〉3〉4〉5〉6〉7
〉0...) The brightness can be adjusted according to your needs. Long
press IR up to zoom.
Changing The Modes
The night version has 3 different modes: photo mode, video mode and
playback mode. Press the Mode button can change mode.
Photo Mode
For taking still photos.
Video Mode
For recording video.
Playback Mode
For playing the recorded files.

9
Taking Pictures
1. Turn on the device,the default is Video mode. Please press the Mode
button to switch to photo mode.
2. Zooming:
Keep pressing the or button to zoom in or zoom out
the image the value of magnification level appears on the LCD
screen.
3. Take a still photo.
View your subject via the LCD screen.
-Adjust the focus by turning the focus wheel.
For night or insufficient light use,turn on the IR by pressing the IR
Up/Zoom in/Up Button.Increase the brightness by pressing the button
repeatedly.It has 7 levels of brightness(0〉1〉2〉3〉4〉5〉6〉7〉
0...)The brightness can be adjusted according to your needs.
- Press the Shot button to take a photo.

10
1.
Camera mode
2.
Default high quality images
3.
Screen brightness gear
4.
Infrared light gear
5.
Battery status
6.
Photo Resolution
7.
Number of pictures that
can be taken
8.
SD card prompt
9.
Digital zoom indication
Recording Video
1.
Video mode
2.
Screen brightness gear
3.
Infrared light gear
4.
Battery status
5.
Video Resolution
6.
Number of pictures that can be
taken
7.
SD card prompt
8.
Digital zoom indication

11
1. Turn on the device,the default is Video mode. If not, press the Mode
button to switch to Video mode.
2. Zooming:
3. Keep pressing the or button to zoom in or zoom out the
image. The value of magnification level appears on the LCD screen.
4. Start to record video.
5. - View your subject via the LCD screen.
6. -Adjust the focus by turning the focus wheel
7. For night or insufficient light use,turn on the IR by pressing the IR
button. Increase the brightness by pressing the button repeatedly.It has
7 levels of brightness (0〉1〉2〉3〉4〉5〉6〉7〉0...) The brightness
can be adjusted according to your needs,darker and need adjusted
more brightness.
8. - Press the Shot button to start to record.The record duration will be
shown on the LCD screen.
9. Finish recording.
10. - Press the Shot button again to stop recording.
11. - The device will stop recording automatically once capacity of the
memory card is full.
Notice:
Device Power Off
If the device fails to activate, check for defective, missing or improperly-
installed batteries. Replace or install batteries correctly. Please make
sure to use only 8x AA Alkaline batteries.
Poor Image
•If you wear glasses, please keep them on while using the
device.
•If at day, make sure the IR is off (if IR is on,screen is black and
white or the screen is colored)

12
•If at night, make sure you have turned on the IR,press IR up (if
IR is on,screen is black and white).
•Adjust the focus by slowing turning the Focus wheel. Make
sure it is focused.
IR –LED (Night vision function)
1. Regarding manual focusing: users can manually focus the
focus wheel according to the actual observation distance to
debug the best focus until the display is clear.
2. The video is silent.
3. In photo/video mode, if you have to view the darkness
environment, please short press IR UP button to activate the
IR LED, the image will change to black and white. The IR LED
have seven levels, short press IR UP button to up the level,
short press IR DOWN button to down the level.
4. Note: If the battery voltage is not enough, the IR LED level
will down automatically. IR level can up to 7 levels when the
battery power is full.
5. If only left half power, the level just can up to 5. If only left
25% power, the level just can up to 3. If the battery power is
lower than 25%, IR LED cannot be activated.
Settings in Photo and Video Mode
Press Menu button in photo or video mode, can change the settings.
Menu
Function
Photo
Resolution
Set the photo resolution.
Options: [3M(2048x1536)] /[2M (1600 x 1200)] /
[1M 1280x960] /[VGA 640x480]

13
Video Size
Set the video resolution.
Options: [FHD 1920X1080 ][960 1280x960]/
[640 640x480].
Night vision
sensitivity
Choose the night vision sensitivity.
Options: [Low] /[Middle] / [High].
Burst
Options: [Off]/[On]
Lcd Bright
User can according to their need to adjust the
brightness of the Lcd screen.
Options: [Level 7] / [Level 6] /[Level 5] /
[Level 4]/[Level 3]/[Level 2]/[Level1].
Power
Frequency
Set the light source frequency to match frequency of
electricity supply in local region to prevent
interference. Options:[50Hz]/[60Hz].
Power Save
Set the time to shut down the device for power
saving if the device is idle.
Options: [3min]/[5min]/[10min]/[OFF].
Date&Time
Set the date and time of device.
Date Stamp
Add the date stamp on the photo or video files.
Options: [Off]/[Date]/[Date&Time].
Language
Set OSD (on-screen) language.
Options: [English] / [Simplified Chinese]/ [Traditional
Chinese] / [Francais] / [nederlands] /[Espanol]
/[Italiano] /[Portugues] /[Deutsch]/ [Pyccknn]/
[Japanese]/ [Korean].

14
Format
Format your TF card. Format TF card will delete all
files including the protected files. Please copy the
important files before confirm.
Options: [Yes] /[No].
Reset All
Restore the setup to factory default settings.
Options: [Yes] /[No].
FW Version
User can see the firmware version information.
Playback
1. Turn on the device, press the Mode button to switch to playback
mode.
2. Press Up/Down button to view photos and video files.
3. Playback the video
- Press the Shot button to start playing the video files.
- Press the Shot button again to have a pause.
- Press Menu button to stop the current video playing.
Press Menu button in playback mode,the screen will display the
playback menu.Press Up/Down button to scan lock or delete. And press
Shot button to select one to enter the sub-menu.
Playback menu list :
Menu
Function
Lock
Lock or unlock the current one file or all files in memory
card.Options:[Lock/Unlock onel]/[Lock All]/ [Unlock All].
Delete
Delete the current one file or delete all files in memory
card.Options: [One]/[All].

15
Download files to PC
There are two ways to download files from the device to a computer:
•By inserting the memory card into a card reader.
•By connecting the device to a computer using the supplied USB
cable.
Using a Card Reader
1. Eject the memory card from the device and insert it into a card
reader. Then connect the card reader to a computer.
2. Open [My Computer] or [Windows Explorer] and double-click the
removable disk icon that represents the memory card.
3. Copy images from the card into a directory of your choice on the
computer’s hard disk.
Connecting the Device to a PC through the USB Cable
1. Turn on the night vision. Connect it to a computer through the
supplied USB cable.
2. When connecting to the computer, it will appears “MSDC” on the
screen.
3. Open [My Computer] or [Windows Explorer]. A"Removable Disk"
appears in the drive list. Double-click the "Removable Disk" icon to view
its contents. Files stored on the camera are located in the folder named
"DCIM".
4. Copy the photos or files to your computer.

16
NOTES on Cleaning
Before cleaning the device, disconnect it from the power supply
(remove batteries) ! Only use a dry cloth to clean the exterior of
the device. To avoid damaging the electronics, do not use any
cleaning fluid. Clean the eyepieces and/or lenses only with a soft,
lint-free cloth, (e.g.microfibre cloth). To avoid scratching the lenses,
use only gentle pressure with the cleaning cloth. Protect the device
from dust and moisture. Store it in a bag or box. Remove the
batteries from the device if it is not used for a longer time.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for
2 years. If you need repair or other services during the warranty period,
contact the product seller directly, you must provide the original proof
of purchase with the date of purchase.
The following are considered to be a conflict with the warranty
conditions, for which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the
product is intended or failing to follow the instructions for
maintenance, operation, and service of the product.
•Damage to the product by a natural disaster, the intervention of an
unauthorized person or mechanically through the fault of the
buyer (e.g., during transport, cleaning by inappropriate means,
etc.).
•Natural wear and aging of consumables or components during use
(such as batteries, etc.).
•Exposure to adverse external influences, such as sunlight and
other radiation or electromagnetic fields, fluid intrusion, object

17
intrusion, mains overvoltage, electrostatic discharge voltage
(including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as
used power supplies, etc.
•If anyone has made modifications, modifications, alterations to the
design or adaptation to change or extend the functions of the
product compared to the purchased design or use of non-original
components.
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized
representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Trail Camera
Model / Type: NV5100
The above product has been tested in accordance with the
standard(s) used to demonstrate compliance with the essential
requirements laid down in the Directive(s):
Directive No. 2014/30/EU
Directive No. 2011/65/EU as amended 2015/863/EU
Prague 7.4. 2022

18
WEEE
This product must not be disposed of as normal household waste in
accordance with the EU Directive on Waste Electrical and Electronic
Equipment (WEEE - 2012/19 / EU). Instead, it shall be returned to the
place of purchase or handed over to a public collection point for the
recyclable waste. By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate
waste handling of this product. Contact your local authority or the
nearest collection point for further details. Improper disposal of this
type of waste may result in fines in accordance with national
regulations.

19
Vážený zákazníku,
Děkujeme vám za zakoupení našeho produktu. Před prvním použitím si
prosím pečlivě přečtěte následující pokyny a uschovejte si tento návod
pro budoucí použití. Zvláštní pozornost věnujte bezpečnostním
pokynům. Pokud máte k přístroji jakékoli dotazy nebo připomínky,
obraťte se na zákaznickou linku.
✉www.alza.czkontakt
✆[phone]
Dovozce Alza.cz a.s. , Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz

20
Použití
Toto zařízení je určeno pouze k pořizování digitálních fotografií a videí,
zejména k pozorování volně žijících zvířat. Není určeno k jinému použití.
Toto zařízení není určeno pro použití v komerčním nebo průmyslovém
prostředí.
Výrobce nenese žádnou odpovědnost za škody způsobené
nedodržením těchto pokynů, nesprávným použitím, neodbornými
opravami, provedením nepovolených úprav nebo použitím
neschválených náhradních dílů. Odpovědnost nese pouze provozovatel.
VAROVÁNÍ
Nepoužívejte výrobek v rozporu s místními zákony a předpisy. Uživatel,
který poruší místní zákony a nařízení, ponese odpovědnost za všechny
důsledky nákupu a používání výrobku.
Alza.cz a.s. nenese odpovědnost za porušení místních zákonů a
předpisů ze strany uživatele.
Pokud bude zařízení umístěno při natáčení ve venkovním prostředí,
mohly by rychlé změny počasí vést k chybnému záznamu.