AMA 55800 User manual
User Manual
Pn. 55800 VEHICLE MONITOR 5.6
Ama S.p.A.
Via Puccini, 28 - 42018 San Martino in Rio (RE)
Tel. 0522 636911 ama@ama.it - www.ama.it
User Manual
Pn. 55800 VEHICLE MONITOR 5.6
Ama S.p.A.
Via Puccini, 28 - 42018 San Martino in Rio (RE)
SUMMARY
Notice…………………………………………………………………………………………………………………………….. 2
Warning …. ……………………………………………………………………………………………………………………. 3
Description ……………………………………………………………………………………………………………………. 4
Installation….………………………………………………………………………………………………………… 5-6-7-8
Use ……………….……………………………………………………………………………………………………………9-10
Menù operation instruction……………………………………………………………………………………… 11-12
Disposal ……………………………………………………………………………………………………………………….. 13
Declaration of conformity ……………………………………………………………………………………………. 14
-1-
This manual is an integral part of vehicle monitor 5.6 and must be readily available to the installation
experts and the user. The installer and the user are required to know the contents of this manual.
The descriprtions and illustrations in this publication are not binding.
Although the main features of the machine described in this manual are not subject to change, Ama
S.p.A. reserves the right to make any modifications to parts, details and accessories it deems
appropriate for the improvement of the vehicle monitor 5.6, ot to meet manufacturing or commercial
requirements at any time and without being obliged to update this manual immediately.
-2-
WARNING
ALLRIGHTS RESERVED UNDER
INTERNATIONSL COPYRIGHT CONVENTIONS
No part of the manuals included with this product may be reproduced in any
form, by any means, without
Ama’s prior written authorization.
Due to AMA's ongoing research and development program, the content of
the following manual is for
information purposes only and is subject to change without notice. Although
the content is kept as accurate
and complete as possible at the time of printing, AMA accepts no
responsibility for any errors or omissions
contained in this manual. This instruction manual must be read before taking
any operational action.
Nothing contained in this manual can be considered as a warranty, either
expressed or implied - including,
not in a restrictive way, the suitability warranty for any special purpose.
Nothing contained in this manual can
be interpreted as a modification or confirmation of the terms of any purchase
contract..
SUMMARY
Notice…………………………………………………………………………………………………………………………….. 2
Warning …. ……………………………………………………………………………………………………………………. 3
Description ……………………………………………………………………………………………………………………. 4
Installation….………………………………………………………………………………………………………… 5-6-7-8
Use ……………….……………………………………………………………………………………………………………9-10
Menù operation instruction……………………………………………………………………………………… 11-12
Disposal ……………………………………………………………………………………………………………………….. 13
Declaration of conformity ……………………………………………………………………………………………. 14
-1-
This manual is an integral part of vehicle monitor 5.6 and must be readily available to the installation
experts and the user. The installer and the user are required to know the contents of this manual.
The descriprtions and illustrations in this publication are not binding.
Although the main features of the machine described in this manual are not subject to change, Ama
S.p.A. reserves the right to make any modifications to parts, details and accessories it deems
appropriate for the improvement of the vehicle monitor 5.6, ot to meet manufacturing or commercial
requirements at any time and without being obliged to update this manual immediately.
-2-
WARNING
ALLRIGHTS RESERVED UNDER
INTERNATIONSL COPYRIGHT CONVENTIONS
No part of the manuals included with this product may be reproduced in any
form, by any means, without
Ama’s prior written authorization.
Due to AMA's ongoing research and development program, the content of
the following manual is for
information purposes only and is subject to change without notice. Although
the content is kept as accurate
and complete as possible at the time of printing, AMA accepts no
responsibility for any errors or omissions
contained in this manual. This instruction manual must be read before taking
any operational action.
Nothing contained in this manual can be considered as a warranty, either
expressed or implied - including,
not in a restrictive way, the suitability warranty for any special purpose.
Nothing contained in this manual can
be interpreted as a modification or confirmation of the terms of any purchase
contract..
Only qualified personnel are allowed to work on electrical systems
in vehicles.
Do not open, modify or damage the components of the kit in any
way.
All warranty claims become void if the product is tampered with by
unauthorised persons.
It is recommended to store the Kit in a dry place and at
temperatures not lower than -10°C.
-3-
MONITOR
5.6”
Art. 55801
WATERPROOF
CAMERA
Art. 55802
CABLE
10 M
ART. 84689*
POWER CORD
Art. 55803
REMOTE
CONTROL
*The spare cable is 20m
MONITOR
CAMERA
5.6"inch 4:3 Screen
Resolution:320（W)*480(H)
Brightness:250cd/M²
contrast：300:1
Angle: L/R: 60° U: 45 °/D: 65°
Range: 113 X 84mm
Power supply:DC 12V-24V
Work rate: 5W
Operating temperature：-20℃～70℃
Storage temperature:-30℃～80℃
3 ways video input,AV2 and AV3 with reverse
cable, two cameras with independent power
supply ports
Display:
→ Display one video at a �me
→Reverse view: automatically switch to
reverse video when reversing, and return to
main (AV1) screen after reversing
Operation mode: remote control or monitor
button
size: 146 (L) *110 (W) * 26 (T)
Resolution:N:510*492 pixels P:500*582 pixels
TV line:600
Lens:2.5mm
Min illumination:0Lux(LED on)
Night vision distance:25ft
Waterproof:IP69k
View angle:120°
Power voltage:12V
Operation temp:-20℃～+70℃
10M meter extended cable (spare cable 20 m)
Audio not available
NOTE: The kit is provided with only one camera,
it is recommended to connect it to V1,
therefore it will be displayed on the monitor in
AV1.
Only qualified personnel are allowed to work on electrical systems
in vehicles.
Do not open, modify or damage the components of the kit in any
way.
All warranty claims become void if the product is tampered with by
unauthorised persons.
It is recommended to store the Kit in a dry place and at
temperatures not lower than -10°C.
-3-
MONITOR
5.6”
Art. 55801
WATERPROOF
CAMERA
Art. 55802
CABLE
10 M
ART. 84689*
POWER CORD
Art. 55803
REMOTE
CONTROL
*The spare cable is 20m
MONITOR
CAMERA
5.6"inch 4:3 Screen
Resolution:320（W)*480(H)
Brightness:250cd/M²
contrast：300:1
Angle: L/R: 60° U: 45 °/D: 65°
Range: 113 X 84mm
Power supply:DC 12V-24V
Work rate: 5W
Operating temperature：-20℃～70℃
Storage temperature:-30℃～80℃
3 ways video input,AV2 and AV3 with reverse
cable, two cameras with independent power
supply ports
Display:
→ Display one video at a �me
→Reverse view: automatically switch to
reverse video when reversing, and return to
main (AV1) screen after reversing
Operation mode: remote control or monitor
button
size: 146 (L) *110 (W) * 26 (T)
Resolution:N:510*492 pixels P:500*582 pixels
TV line:600
Lens:2.5mm
Min illumination:0Lux(LED on)
Night vision distance:25ft
Waterproof:IP69k
View angle:120°
Power voltage:12V
Operation temp:-20℃～+70℃
10M meter extended cable (spare cable 20 m)
Audio not available
NOTE: The kit is provided with only one camera,
it is recommended to connect it to V1,
therefore it will be displayed on the monitor in
AV1.
Installation
Assembly and connection
1.Assembly
»Butterfly bracket
Fixed the bracket via screws and / or the adhesive
» Monitor
Put the metal buckle piece on the top of the fan-shaped bracket into the notch at
the back of the monitor. Screw the nut to the bracket.
» Camera
Fixed the bracket via scews.
» Headrest shroud of monitor
Supplied frame for inserting the monitor in the dashboard:
Installation
Assembly and connection
1.Assembly
»Butterfly bracket
Fixed the bracket via screws and / or the adhesive
» Monitor
Put the metal buckle piece on the top of the fan-shaped bracket into the notch at
the back of the monitor. Screw the nut to the bracket.
» Camera
Fixed the bracket via scews.
» Headrest shroud of monitor
Supplied frame for inserting the monitor in the dashboard:
Drilling template for the dashboard:
2.Connection
Drilling template for the dashboard:
2.Connection
Instruction
1.Remote control
Analog increase Power ON/OFF
Audio not
available
Vertical mirror image
Horizontal
mirror
Right arrow Left arrow
Analog decrease
Mode Timer (0-240 mins)
Guide lines AV switchover
16:9/4:3 Reset
2.Monitor
Analog increase
Menù/ Power ON/OFF
AV Switchcamera
Audio not
Available
Instruction
1.Remote control
Analog increase Power ON/OFF
Audio not
available
Vertical mirror image
Horizontal
mirror
Right arrow Left arrow
Analog decrease
Mode Timer (0-240 mins)
Guide lines AV switchover
16:9/4:3 Reset
2.Monitor
Analog increase
Menù/ Power ON/OFF
AV Switchcamera
Audio not
Available
Menù operation instruction
Press button MENU (on remote control or monitor). The screen will show
these features:
PICTURE PRESET
VOLUME (NOT AVAILABLE) OPTION SYSTEM
Press to select other feature . Press to adjust parameter.
1. PICTURE:
∙ Brightness Adjust 0 ~ 100
∙ Contrast Adjust 0 ~ 100
∙ Color Adjust 0 ~ 100
∙ Language
∙ Reset
2. VOLUME:
NOT AVAILABLE
3. OPZIONI:
∙ Picture overturn Up/Down/Left/Right
∙ Display format 4:3 or 16:9
∙V1V2-3S : If ON, CAM1 and CAM2 are displayed
alternately for 3 seconds.
BC2-AV1 : (1) Turn on monitor (2) Turn on Trigger
starting up (BC2-AV1) in the menu of monitor, (3) Turn
off monitor, (4 When monitor in standby situation, AV2
image show on the monitor after power on trigger wire-2; (5) Then power off trigger wire-2, AV2
image will close and turn into AV1 at once, AV1 image will stay a 10 seconds before closing.
** This function can’t work in trigger wire-3.
BC2-AV1 : (1) Turn on monitor (2) Turn off Trigger starting up (BC2-AV1) in the menu of monitor, (3)
Turn off monitor, (4) When monitor in standby situation, AV2 or AV3 image show on the monitor
after power on trigger wire-2 or wire-3 ; (5) : then power off trigger-2or 3 wire, AV2 or AV3 image
will close at once.
4. SYSTEM
. S-COLOR Choose between PAL/NTSC/AUTO for screen
image. he PAL system is widespread in Europe while
NTSC is widespread in America. If you choose AUTO,
the monitor will automatically pair with the camera. . .
.ACC -TIME 0 ~ 15” Reversing image delay time .
. GUIDE LINES (stationary)
. AUTO DIM : if active (ON) it allows to
automatically adjust the image display based on external conditions.
5. PRESET
. Set the monitor to turn off automatically 0 ~ 240 min
Menù operation instruction
Press button MENU (on remote control or monitor). The screen will show
these features:
PICTURE PRESET
VOLUME (NOT AVAILABLE) OPTION SYSTEM
Press to select other feature . Press to adjust parameter.
1. PICTURE:
∙ Brightness Adjust 0 ~ 100
∙ Contrast Adjust 0 ~ 100
∙ Color Adjust 0 ~ 100
∙ Language
∙ Reset
2. VOLUME:
NOT AVAILABLE
3. OPZIONI:
∙ Picture overturn Up/Down/Left/Right
∙ Display format 4:3 or 16:9
∙V1V2-3S : If ON, CAM1 and CAM2 are displayed
alternately for 3 seconds.
BC2-AV1 : (1) Turn on monitor (2) Turn on Trigger
starting up (BC2-AV1) in the menu of monitor, (3) Turn
off monitor, (4 When monitor in standby situation, AV2
image show on the monitor after power on trigger wire-2; (5) Then power off trigger wire-2, AV2
image will close and turn into AV1 at once, AV1 image will stay a 10 seconds before closing.
** This function can’t work in trigger wire-3.
BC2-AV1 : (1) Turn on monitor (2) Turn off Trigger starting up (BC2-AV1) in the menu of monitor, (3)
Turn off monitor, (4) When monitor in standby situation, AV2 or AV3 image show on the monitor
after power on trigger wire-2 or wire-3 ; (5) : then power off trigger-2or 3 wire, AV2 or AV3 image
will close at once.
4. SYSTEM
. S-COLOR Choose between PAL/NTSC/AUTO for screen
image. he PAL system is widespread in Europe while
NTSC is widespread in America. If you choose AUTO,
the monitor will automatically pair with the camera. . .
.ACC -TIME 0 ~ 15” Reversing image delay time .
. GUIDE LINES (stationary)
. AUTO DIM : if active (ON) it allows to
automatically adjust the image display based on external conditions.
5. PRESET
. Set the monitor to turn off automatically 0 ~ 240 min
The symbol of the crossed basket, in accordance with the Directive 2012/19/EU,
reported on the device indicates that the product at the end of its life cycle, having
to be treated separately from domestic waste, must be conferred at a recycling
center for electrical and electronic equipment. For information on the collection
points of equipment to be scrapped, Contact Your Local Municipality or local
disposal services. The kit also contains a lithium battery, at the end of life or in case
of damage the devices that make up it cannot be disposed of as a common urban
waste but must be delivered in the appropriate recycling centre.
Plastic materials are recyclable separately.
EEUUDDeeccllaarraattiioonnooffCCoonnffoorrmmiittyy
CCoommppaannyy
AAMMAASSPPAA
AAddddrreessss
Via Puccini 28 San Martino in Rio (RE)
CCoouunnttrryy
ITALIA
PPhhoonneennuummbbeerr
+39 0522 636911
EE
--
MMaaiill
ama@ama.it
as importer, it certifies and declares under its sole responsibility that the following
products
PPrroodduuccttddeessccrriippttiioonn
VVeehhiicclleemmoonniittoorr
IImmppoorrtt
eerr
AMA SpA
BBrraanndd
AMA
TTyyppee
55800
is tested to and conforms with the essential requirements for protection of health and the
safety of the user and any other person and Electromagnetic Compatibility, as included in
following standards:
EN 50498 2010 (CAMERA)
EN 55032 2015 (CAMERA E MONITOR)
EN 55024 2010 (CAMERA E MONITOR)
and therefore complies with the essential requirements and provisions of the Directive
2014/53/EU of the EuropeanParliament. The equipment also complies with Directive
2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment.
Have been approved device according to the requirements of the Regilations:
ECE-R10 Electromagnetic Compatibility
The technical documentation as required by the Conformity Assessment procedure is kept
at AMA Spa:
The symbol of the crossed basket, in accordance with the Directive 2012/19/EU,
reported on the device indicates that the product at the end of its life cycle, having
to be treated separately from domestic waste, must be conferred at a recycling
center for electrical and electronic equipment. For information on the collection
points of equipment to be scrapped, Contact Your Local Municipality or local
disposal services. The kit also contains a lithium battery, at the end of life or in case
of damage the devices that make up it cannot be disposed of as a common urban
waste but must be delivered in the appropriate recycling centre.
Plastic materials are recyclable separately.
E
E
U
U
D
D
e
e
c
c
l
l
a
a
r
r
a
a
t
t
i
i
o
o
n
n
o
o
f
f
C
C
o
o
n
n
f
f
o
o
r
r
m
m
i
i
t
t
y
y
CCoommppaannyy
AAMMAASSPPAA
AAddddrreessss
Via Puccini 28 San Martino in Rio (RE)
CCoouunnttrryy
ITALIA
PPhhoonneennuummbbeerr
+39 0522 636911
EE
--
MMaaiill
as importer, it certifies and declares under its sole responsibility that the following
products
PPrroodduuccttddeessccrriippttiioonn
VVeehhiicclleemmoonniittoorr
IImmppoorrtt
eerr
AMA SpA
BBrraanndd
AMA
TTyyppee
55800
is tested to and conforms with the essential requirements for protection of health and the
safety of the user and any other person and Electromagnetic Compatibility, as included in
following standards:
EN 50498 2010 (CAMERA)
EN 55032 2015 (CAMERA E MONITOR)
EN 55024 2010 (CAMERA E MONITOR)
and therefore complies with the essential requirements and provisions of the Directive
2014/53/EU of the EuropeanParliament. The equipment also complies with Directive
2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment.
Have been approved device according to the requirements of the Regilations:
ECE-R10 Electromagnetic Compatibility
The technical documentation as required by the Conformity Assessment procedure is kept
at AMA Spa:
